Synlett 2007(13): 2077-2080  
DOI: 10.1055/s-2007-984906
LETTER
© Georg Thieme Verlag Stuttgart · New York

Nickel-Catalyzed Cross-Coupling Reactions of Aryltitanium(IV) Alkoxides with Aryl Halides

Georg Manolikakes, Navid Dastbaravardeh, Paul Knochel*
Department Chemie und Biochemie, Ludwig-Maximilians-Universität München, Butenandtstr. 5-13, Haus F, 81377 München, Germany
Fax: +49(89)218077680; e-Mail: Paul.Knochel@cup.uni-muenchen.de;
Further Information

Publication History

Received 15 May 2007
Publication Date:
17 July 2007 (online)

Abstract

A nickel-catalyzed cross-coupling reaction between aryltitanium(IV) alkoxides and various functionalized aryl halides is described. The reaction requires Ni(acac)2 (0.5 mol%), a phosphine or an N-heterocyclic carbene ligand (NHC ligand; 0.5-1.0 mol%) and proceeds at 25 °C within 1-24 hours.

    References and Notes

  • 1a Metal-Catalyzed Cross-Coupling Reactions   2nd ed.:  de Meijere A. Diederich F. Wiley-VCH; Weinheim: 2004. 
  • 1b Tsuji J. Transition Metal Reagents and Catalysts: Innovations in Organic Synthesis   Wiley; Chichester: 1995. 
  • 1c Cross-Coupling Reactions: A Practical Guide, In Top. Curr. Chem.   Vol. 219:  Miyaura N. Springer-Verlag; Berlin-Heidelberg: 2002. 
  • 2a Duthaler R. Hafner A. In Transition Metals for Organic Synthesis   Beller M. Bolm C. Wiley-VCH; Weinheim: 1998.  p.447 
  • 2b Reetz M. Organotitanium Reagents in Organic Synthesis   Springer Verlag; Berlin: 1986. 
  • 2c Weidmann B. Seebach D. Helv. Chim. Acta  1980,  63:  2451 
  • 3a Sato F. Urabe H. Okamoto S. Chem. Rev.  2000,  100:  2835 
  • 3b Sato F. Urabe H. In Titanium and Zirconium in Organic Synthesis   Marek I. Wiley-VCH; Weinheim: 2002.  p.319 
  • 3c Kulinkovich O. de Meijere A. Chem. Rev.  2002,  100:  2789 
  • 4a Weidmann B. Widler L. Olivero A. Maycock C. Seebach D. Helv. Chim. Acta  1981,  64:  357 
  • 4b Reetz M. Top. Curr. Chem.  1982,  106:  1 
  • 5a Tsuji T. Ishii T. J. Organomet. Chem.  1992,  425:  41 
  • 5b Fleming S. Kabara K. Nickisch K. Neh H. Westermann J. Tetrahedron Lett.  1994,  35:  6075 
  • 5c Arai M. Lipshutz B. Nakamura E. Tetrahedron  1992,  48:  5709 
  • 5d Bumagin N. Ponomaryov A. Beletskaya I. J. Organomet. Chem.  1985,  291:  129 
  • 5e Han J. Tokunaga N. Hayashi T. Synlett  2002,  871 
  • 5f Obora Y. Moriya H. Tokunaga M. Tsuji Y. Chem. Commun.  2003,  2820 
  • 6a Arduengo A. Krafczyk R. Schmutzler R. Craig H. Goerlich J. Marshall W. Unverzagt M. Tetrahedron  1999,  55:  14523 
  • 6b Scott N. Nolan S. Eur. J. Inorg. Chem.  2005,  1815 
  • 6c Marion N. Navarro O. Mei J. Stevens E. Scott N. Nolan S. J. Am. Chem. Soc.  2006,  128:  4101 
  • 6d Organ M. Avola S. Dubovyk I. Hadei N. Kantchev E. O’Brien C. Valente C. Chem. Eur. J.  2006,  12:  4749 
  • 6e

    The NHC ligand itself is generated by deprotonation with the organometallic reagent. See also references above.

  • 7 Wada M. Higashizaki S. Chem. Commun.  1984,  482 
  • 8 Polar solvents such as NMP, NEP (N-ethyl-2-pyrroli-dinone), DMPU or DME were not effective as co-solvents, as it is known in other cross-coupling reactions. See also: Gavryushin A. Kofink C. Manolikakes G. Knochel P. Org. Lett.  2005,  7:  4871 
  • 9 Krasovskiy A. Knochel P. Angew. Chem. Int. Ed.  2004,  43:  3333 
  • 10 Yunusov S. Sidakin G. Zh. Obshch. Khim.  1955,  25:  2009 
  • 11 Brittain J. Jones R. Arques J. Saliente T. Synth. Commun.  1982,  12:  231 
  • 12 Nguyen T. Negishi E. Tetrahedron Lett.  1991,  32:  5903 
  • 13a Negishi E. Valente L. Kobayashi M. J. Am. Chem. Soc.  1980,  102:  3298 
  • 13b Negishi E. Acc. Chem. Res.  1982,  15:  340 
  • 13c Zeng X. Quian M. Hu Q. Negishi E. Angew. Chem. Int. Ed.  2004,  43:  2259 
  • 13d Quian M. Huang Z. Negishi E. Org. Lett.  2004,  6:  1531 
14

Not using NMP leads to heterogeneous reactions and lower yields.

15

Typical Procedure for the Cross-Coupling Reaction; Preparation of Biphenyl-4-carboxylic Acid Ethyl Ester ( 3a): A flame-dried flask equipped with a magnetic stirring bar, an argon inlet, and a septum was charged with a Ti(OEt)4 solution (1.0 mL, 1.5 M in THF). First phenyl-magnesium chloride (0.84 mL, 1.79 M in THF) was added dropwise at 0 °C, then Ni(acac)2 (1.3 mg, 0.005 mmol), ligand 4 (2.1 mg, 0.005 mmol) and 4-bromobenzoic acid ethyl ester (2a; 229 mg, 1.00 mmol) were added. The reaction mixture was stirred for 3 h at r.t. Then the mixture was quenched with a sat. NH4Cl solution and extracted with Et2O. Column chromatography (pentane-Et2O, 9:1) of the crude residue yielded 3a as colorless solid (215 mg, 95%).