Synlett 2010(18): 2701-2707  
DOI: 10.1055/s-0030-1259018
ACCOUNT
© Georg Thieme Verlag Stuttgart ˙ New York

On the Practical Limits of Determining Isolated Product Yields and Ratios of Stereoisomers: Reflections, Analysis, and Redemption

Martina Wernerova, Tomas Hudlicky*
Department of Chemistry and the Centre for Biotechnology, Brock University, 500 Glenridge Avenue, St. Catharines, ON L2S 3A1, Canada
Fax: 1(905)9844841; e-Mail: thudlicky@brocku.ca;
Further Information

Publication History

Received 4 August 2010
Publication Date:
26 October 2010 (online)

Abstract

This paper examines the limits of accuracy in reporting isolated product yields (i.e., recovery of total mass from chromatography or extractions) as well as ratios of isomers determined by HPLC, GC, or NMR methods. Attention is directed to the magnitude of errors encountered in the HPLC or GC measurements of such ratios when these measurements are conducted without accurate calibrations or determinations of response factors for the particular isomers. Accurately defined mixtures of compounds (prepared by volumetric means) were examined by the above methods and the obtained measurements compared with the actual composition. The relative errors between actual content and the measured values are listed for all comparisons. In addition, accuracy in the determination of weight of a sample as a function of scale was also examined. The results are tabulated for comparison and suggestions are made to the reader as to how to avoid inaccurate reporting of experimental parameters. The authors hope that disclosure of these facts will result in new editorial policies requiring that a phrase ‘dr or er ratios reported in this paper have not been validated by calibration’ be inserted into general experimental descriptions. In addition, such editorial policy should also discourage the use of terms ‘de’ and ‘ee’, as these descriptors do not provide accurate and meaningful information about stereoisomer composition. This latter issue has already been suggested in the literature on several occasions.

1 Introduction

2 On the Question of Isolated Product Yields

3 On Determination of Accurate Weights

4 On the Question of Accurate Detection of Stereoisomer ­Ratios

5 Conclusion

    References

  • 2a Hudlicky T. Chem. Rev.  1996,  96:  3 
  • 2b Hudlicky T. Reed JW. In The Way of Synthesis   Wiley-VCH; Weinheim, Germany: 2007. 
  • For essays and articles on this topic, see:
  • 3a

    Farber, C. Out of control: AIDS and the corruption of medical science,
    In HarperŽs Magazine; March 2006, 37-52

  • 3b Morrissey SR. Chem. Eng. News  2006,  84(45):  18 
  • 3c Schultz WG. Chem. Eng. News  2007,  85(11):  35 
  • For an example, see:
  • 4a Jones RD. Chem. Eng. News  2006,  84(8):  6 
  • See also:
  • 4b Rovner S. Chem. Eng. News  2006,  84(6):  6 . Further discussion of this topic and additional references are found in reference 1b above (pages 197, 930)
  • 5 For a discussion of accurate weighing techniques, see: Kolthoff IM. Sandell EB. Meehan EJ. Bruchenstein S. Balance, Weights, and Weighing, In Quantitative Chemical Analysis   4th ed:  Collier-Macmillan; Toronto: 1969.  Chap 19. p.474-512  
  • 6 For example. see: Carlson R. In Design and Optimization in Organic Synthesis   Elsevier; Amsterdam: 1992. 
  • Efficiency metrics: For definition of Evalue/EQvalue, see:
  • 7a Sheldon RA. Chemtech  1994,  38 
  • 7b Sheldon RA. Chem. Ind.  1992,  903 
  • 7c Sheldon RA. Chem. Ind.  1997,  12 
  • For definition of Effective Mass Yield (EMY), see:
  • 7d Bui VP. Hansen TV. Stenstrom Y. Hudlicky T. Green. Chem.  2000,  2:  263 
  • For definition of Reaction Mass Efficiency (RME), see:
  • 7e Curzons AD. Constable DJC. Mortimer DA. Cunningham VL. Green Chem.  2001,  3:  1 
  • 7f Constable DJC. Curzons AD. Cunningham VL. Green Chem.  2002,  4:  521 
  • 8 Andraos J. Green Chem. Metrics  2009,  69 
  • 9 Andraos J. Org. Process Res. Develop.  2009,  13:  161 
  • 11 Medina JR. Cruz G. Cabrera CR. Soderquist JA.
    J. Org. Chem.  2003,  68:  4631 
  • For examples, see:
  • 12a Deubner R. Holzgrabe U. Magn. Res. Chem.  2002,  40:  762 
  • 12b Staubach B. Buddrus J. Angew. Chem. Int. Ed. Engl.  1996,  35:  1344 
  • 12c Soto-Cairoli B. Soderquist JA. Org. Lett.  2009,  11:  401 
  • 12d Soderquist JA. Rane AM. Tetrahedron Lett.  1993,  34:  5031 
  • 12e Burgos CH. Canales E. Matos K. Soderquist JA. J. Am. Chem. Soc.  2005,  127:  8044 
  • For determination of ratios by ³¹P NMR, see:
  • 12f Canales E. Prasad KG. Soderquist JA. J. Am. Chem. Soc.  2005,  127:  11572 
  • 13 Buddrus J. Herzog H. Risch K. Anal. Chem.  1994,  66:  40 
  • 14 Clarideg TDW. Davies SG. Polywka MEC. Roberts PM. Russell AJ. Savory ED. Smith AD. Org. Lett.  2008,  10:  5433 
  • 15 Ward DE. Rhee CK. Tetrahedron Lett.  1991,  32:  7165 
  • 16 Tsai W.-L. Hermann K. Hug E. Rohde B. Dreiding AS. Helv. Chim. Acta  1985,  68:  2238 
  • 17 Gawley RE. J. Org. Chem.  2006,  71:  2411 
1

Presented in part as ‘Short Course on Integrity in Organic Synthesis’ for faculty and students at University of British Columbia, Simon Fraser University, University of Ottawa, and University of Oslo.

10

Gibbs free energy values and corresponding isomer ratios: Values calculated at T = 295.15 K: 75/25 = 0.64 kcal/mol, 80/20 = 0.81 kcal/mol, 90/10 = 1.29 kcal/mol, 95/5 = 1.73 kcal/mol, 99/1 = 2.70 kcal/mol, 199/1 = 3.10 kcal/mol.