Synlett 2012; 23(14): 2098-2102
DOI: 10.1055/s-0031-1290436
letter
© Georg Thieme Verlag Stuttgart · New York

Dinuclear Titanium Complexes with Sulfamide Ligands as Precatalysts for Hydroaminoalkylation and Hydroamination Reactions

Daniel Jaspers
Institut für Reine und Angewandte Chemie, Universität Oldenburg, Carl-von-Ossietzky-Str. 9-11, 26111 Oldenburg, Germany, Fax: +49(441)7983329   Email: doye@uni-oldenburg.de
,
Wolfgang Saak
Institut für Reine und Angewandte Chemie, Universität Oldenburg, Carl-von-Ossietzky-Str. 9-11, 26111 Oldenburg, Germany, Fax: +49(441)7983329   Email: doye@uni-oldenburg.de
,
Sven Doye*
Institut für Reine und Angewandte Chemie, Universität Oldenburg, Carl-von-Ossietzky-Str. 9-11, 26111 Oldenburg, Germany, Fax: +49(441)7983329   Email: doye@uni-oldenburg.de
› Author Affiliations
Further Information

Publication History

Received: 23 May 2012

Accepted after revision: 18 June 2012

Publication Date:
08 August 2012 (online)


Abstract

A new dinuclear titanium sulfamide complex was synthesized from N,N′-diphenylsulfamide and Ti(NMe2)4 and used as a precatalyst for the intermolecular hydroaminoalkylation of alkenes as well as the intramolecular hydroamination of alkenes.

 
  • References and Notes

  • 1 Review: Müller TE, Hultzsch KC, Yus M, Foubelo F, Tada M. Chem. Rev. 2008; 108: 3795
  • 2 Review: Roesky PW. Angew. Chem. Int. Ed. 2009; 48: 4892 ; Angew. Chem. 2009, 121, 4988
    • 4a Eisenberger P, Ayinla RO, Lauzon JM. P, Schafer LL. Angew. Chem. Int. Ed. 2009; 48: 8361 ; Angew. Chem. 2009, 121, 8511
    • 4b Zi G, Zhang F, Song H. Chem. Commun. 2010; 46: 6296
    • 4c Reznichenko AL, Emge TJ, Audörsch S, Klauber EG, Hultzsch KC, Schmidt B. Organometallics 2011; 30: 921
    • 4d Reznichenko AL, Hultzsch KC. J. Am. Chem. Soc. 2012; 134: 3300
    • 5a Kubiak R, Prochnow I, Doye S. Angew. Chem. Int. Ed. 2009; 48: 1153 ; Angew. Chem. 2009, 121, 1173
    • 5b Prochnow I, Kubiak R, Frey ON, Beckhaus R, Doye S. ChemCatChem 2009; 1: 162
    • 5c Kubiak R, Prochnow I, Doye S. Angew. Chem. Int. Ed. 2010; 49, 2621 ; Angew. Chem. 2010, 122, 2683
    • 5d Prochnow I, Zark P, Müller T, Doye S. Angew. Chem. Int. Ed. 2011; 50: 6401 ; Angew. Chem. 2011, 123, 6525
  • 6 Bexrud JA, Eisenberger P, Leitch DC, Payne PR, Schafer LL. J. Am. Chem. Soc. 2009; 131: 2116
    • 7a Ackermann L, Bergman RG. Org. Lett. 2002; 4: 1475
    • 7b Ackermann L, Bergman RG, Loy RN. J. Am. Chem. Soc. 2003; 125: 11956
    • 8a Watson DA, Chiu M, Bergman RG. Organometallics 2006; 25: 4731
    • 8b Xiang L, Zhang F, Zhang J, Song H, Zi G. Inorg. Chem. Commun. 2010; 13: 666
    • 8c Zi G, Zhang F, Xiang L, Chen Y, Fang W, Song H. Dalton Trans. 2010; 39: 4048
  • 9 Born K, Doye S. Eur. J. Org. Chem. 2012; 764
  • 10 Mills RC, Doufou P, Abboud KA, Boncella JM. Polyhedron 2002; 21: 1051

    • Pt complexes with sulfamide ligands are described in:
    • 11a Kemmitt RD. W, Mason S, Moore MR, Russell DR. J. Chem. Soc., Dalton Trans. 1992; 409
    • 11b Kemmitt RD. W, Mason S, Moore MR, Fawcett J, Russell DR. J. Chem. Soc., Chem. Commun. 1990; 1535

      Alternative synthesis of sulfamides can be found in:
    • 13a Muñiz K, Nieger M. Synlett 2005; 149
    • 13b Leontiev AV, Dias HV. R, Rudkevich DM. Chem. Commun. 2006; 2887
    • 13c Woolven H, González-Rodríguez C, Marco I, Thompson AL, Willis MC. Org. Lett. 2011; 13: 4876
  • 14 Experimental Procedure N,N′-Diphenylsulfamide (1, 0.248 g, 1.0 mmol) was slowly added to a solution of Ti(NMe2)4 (0.224 g, 1.0 mmol) in toluene (5 mL) at r.t. The reaction mixture was stirred for 3 h, and then the solvent was removed under vacuum. The resulting solid was recrystallized from a mixture of toluene and CH2Cl2 (10:3) to give red crystals of complex 2 (0.311 g, 81%). 1H NMR (500 MHz, CDCl3): δ = 3.31 (s, 24 H, CH3), 6.96 (d, 3 J H,H = 8.0 Hz, 8 H, PhH ortho ), 7.01 (t, 3 J H,H = 7.3 Hz, 4 H, PhH para ), 7.14 (t, 3 J H,H = 7.7 Hz, 8 H, PhH meta ) ppm. 13C NMR (126 MHz, C6D6): δ = 47.7 (CH3), 124.5 (CH), 125.6 (CH), 128.6 (CH), 143.1 (C) ppm.
    • 15a Armistead LT, White PS, Gagné MR. Organometallics 1998; 17: 216
    • 15b Royo E, Betancort JM, Davis TJ, Carroll P, Walsh PJ. Organometallics 2000; 19: 4840
    • 15c Schwarz AD, Herbert KR, Paniagua C, Mountford P. Organometallics 2010; 29: 4171
  • 16 Compound 2: red crystals (polyhedron), dimensions 0.50 × 0.21 × 0.15 mm3, monoclinic, space group P21/n, unit cell dimensions: a = 9.0358(2) Å, b = 16.0367(3) Å, c = 12.5598(2) Å, α = 90°, β = 96.6210(10)°, γ = 90°, V = 1807.83(6) Å3, Z = 2, ρ = 1.410 Mg/m3, Θmax= 34.99°, radiation Mo Kα, λ = 0.71073 Å, φ and ω scans with Bruker KAPPA APEX-II CCD at T = 153(2) K, 32381 reflections measured, 7876 unique [R int = 0.0470], 6067 observed [I > 2σ(I)], intensities were corrected for Lorentz and polarization effects, an empirical absorption correction was applied using Bruker SAINT based on the Laue symmetry of the reciprocal space, μ = 0.611 mm–1, Tmin = 0.7516, Tmax = 0.9150, structure solved by direct methods and refined against F 2 with a full-matrix least-squares algorithm using the SHELXS-97 software package, 230 parameters refined, hydrogen atoms were treated using appropriate riding models, goodness of fit 1.026 for observed reflections, final residual values R 1 = 0.0341, wR 2 = 0.0901 for observed reflections, largest diff. peak, hole 0.456 and –0.327 eÅ–3. The structure contains about 4% Cl atoms in the para position of the phenyl substituents. This is caused by a chlorination side reaction that takes place during the synthesis of the ligand 1. However, the impurity could not be observed by 1H NMR. CCDC number 883164 contains the supplementary crystallographic data for this paper. These data can be obtained free of charge from the Cambridge Crystallographic Data Centre via www.ccdc.cam.ac.uk/data_request/cif.
  • 17 Experimental Procedure N,N′-Diphenylsulfamide (1, 0.612 g, 2.5 mmol) was slowly added to a solution of Ti(NMe2)4 (1.14 g, 5.1 mmol) in n-hexane (10 mL) at r.t. The reaction mixture was stirred for 3 h, and then the dispersed precipitate was filtered off quickly. The resulting solid was dried under vacuum to give the pure complex 3 (0.990 g, 65%) as a light yellow powder. For crystallization, a concentrated solution of 3 in a mixture of n-hexane and toluene (5:3) was stored at 4 °C to give light yellow crystals. 1H NMR (500 MHz, C6D6): δ = 3.13 (s, 36 H, CH3), 6.94 (t, 3 J H,H = 7.3 Hz, 2 H, PhH para ), 7.12–7.17 (m, 4 H, PhH meta ), 7.28 (d, 3 J H,H = 8.1 Hz, 4 H, PhH ortho ) ppm. 13C NMR (126 MHz, C6D6): δ = 46.4 (CH3), 124.4 (CH), 125.2 (CH), 129.2 (CH), 144.0 (C) ppm.
  • 18 Compound 3: light yellow crystals (polyhedron), dimensions 0.60 × 0.48 × 0.33 mm3, monoclinic, space group P21/n, unit cell dimensions: a = 8.9022(2) Å, b = 24.2017(7) Å, c = 14.9008(4) Å, α = 90°, β = 94.0400(10)°, γ = 90°, V = 3202.38(15) Å3, Z = 4, ρ = 1.258 Mg/m3, Θmax = 35.07°, radiation Mo Kα, λ = 0.71073 Å, φ and ω scans with Bruker KAPPA APEX-II CCD at T = 153(2) K, 71359 reflections measured, 13938 unique [R int = 0.0694], 10557 observed [I > 2σ(I)], intensities were corrected for Lorentz and polarization effects, an empirical absorption correction was applied using Bruker SAINT based on the Laue symmetry of the reciprocal space, μ = 0.597 mm–1, T min = 0.716, T max = 0.821, structure solved by direct methods and refined against F 2 with a full-matrix least-squares algorithm using the SHELXS-97 software package, 346 parameters refined, hydrogen atoms were treated using appropriate riding models, goodness of fit 1.045 for observed reflections, final residual values R 1 = 0.0419, wR 2 = 0.1073 for observed reflections, largest diff. peak, hole 0.778 and –0.382 eÅ–3. CCDC number 883163 contains the supplementary crystallographic data for this paper. These data can be obtained free of charge from the Cambridge Crystallographic Data Centre via www.ccdc.cam.ac.uk/data_request/cif.
  • 19 General Procedure Exemplified by the Reaction of 1-Octene with N-Methylaniline An oven-dried Schlenk tube equipped with a Teflon stopcock, and a magnetic stirring bar was transferred to a nitrogen-filled glove box and charged with the catalyst 3 (61 mg, 0.1 mmol, 5 mol%), n-hexane (1 mL), 1-octene (337 mg, 3.0 mmol), and N-methylaniline (214 mg, 2.0 mmol). The tube was sealed, and the resulting mixture was heated to 120 °C for 48 h. The crude product was purified by flash chromatography (PE–EtOAc = 40:1) to give a mixture of the regioisomers 4a and 4b (336 mg, 1.53 mmol, 77%, 97:3) as a colorless oil. All compounds were identified by com-parison of the obtained 1H NMR and 13C NMR spectra with those reported in the literature.3–5