Synlett 2022; 33(14): 1347-1352
DOI: 10.1055/a-1795-8322
cluster
Organic Chemistry in Thailand

Ionic Liquid Driven Nucleophilic Substitution of Squaric Acid to Squaramides

Siraporn Soonthonhut
,
Peera Acharasatian
This work was partially supported by the Department of Chemistry, Thammasat University.


Abstract

Solubility is a crucial encumbrance for the synthesis of squaramides through nucleophilic substitution of squaric acid. The reactions must be performed in an aqueous medium since squaric acid is insoluble in virtually all organic solvents. The scope of amine nucleophiles was consequently restricted to those amines soluble in water. Owing to remarkable solvating ability of ionic liquid, reactions of squaric acid with a variety of structurally diverse amine nucleophiles were achieved. Interestingly, a catalyst-free reaction in 1-butyl-3-methylimidazolium chloride or [bmim]Cl could produce squaramides up to 99% yield. With the same efficacies, [bmim]Cl could be reused for at least three cycles. The catalyst-free, ionic liquid mediated approach expanded the reactant scope and offered a simple, efficient, and environmentally friendly synthesis of squaramides.

Supporting Information



Publication History

Received: 31 January 2022

Accepted after revision: 11 March 2022

Accepted Manuscript online:
11 March 2022

Article published online:
12 April 2022

© 2022. Thieme. All rights reserved

Georg Thieme Verlag KG
Rüdigerstraße 14, 70469 Stuttgart, Germany

 
  • References and Notes

    • 1a Marchetti LA, Kumawat LK, Mao N, Stephens JC, Elmes RB. P. Chem 2019; 5: 1398
    • 1b Chasak J, Slachtova V, Urban M, Brulikova L. Eur. J. Med. Chem. 2021; 209: 112872
    • 2a Berney M, Doherty W, Jauslin WT, Manoj MT, Durr E.-M, McGouran JF. Bioorg. Med. Chem. 2021; 46: 116369
    • 2b Ghosh AK, Williams JN, Kovela S, Takayama J, Simpson HM, Walters DE, Hattori S, Aoki M, Mitsuya H. Bioorg. Med. Chem. Lett. 2019; 29: 2565
    • 2c Agnew-Francis KA, Williams CM. Chem. Rev. 2020; 120: 11616
    • 2d Molodtsov V, Fleming PR, Eyermann CJ, Ferguson AD, Foulk MA, McKinney DC, Masse CE, Buurman ET, Murakami KS. J. Med. Chem. 2015; 58: 3156
    • 2e Marin C, Ximenis M, Ramirez-Macias I, Rotger C, Urbanova K, Olmo F, Martin-Escolano R, Rosales MJ, Canas R, Gutierrez-Sanchez R, Costa A, Sanchez-Moreno M. Exp. Parasitol. 2016; 170: 36
    • 3a Sato K, Seio K, Sekine M. J. Am. Chem. Soc. 2002; 124: 12715
    • 3b Grus T, Lahnif H, Klasen B, Moon E-S, Greifenstein L, Roesch F. Bioconjugate Chem. 2021; 32: 1223
    • 4a Portell A, Prohens R. Cryst. Growth Des. 2014; 14: 397
    • 4b Ximenis M, Pitarch-Jarque J, Blasco S, Rotger C, Garcia-Espana E, Costa A. Cryst. Growth Des. 2018; 18: 4420
    • 4c Portell A, Font-Bardia M, Prohens R. Cryst. Growth Des. 2013; 13: 4200
    • 5a Li Y, Yang G.-H, Shen Y.-Y, Xue X.-S, Li X, Cheng J.-P. J. Org. Chem. 2017; 82: 8662
    • 5b Sanna E, Martinez L, Rotger C, Blasco S, Gonzalez J, Garcia-Espana E, Costa A. Org. Lett. 2010; 12: 3840
    • 6a Kucherenko AS, Kostenko AA, Komogortsev AN, Lichitsky BV, Fedotov MY, Zlotin SG. J. Org. Chem. 2019; 84: 4304
    • 6b Sakai T, Hirashima S, Yamashita Y, Arai R, Nakashima K, Yoshida A, Koseki Y, Miura T. J. Org. Chem. 2017; 82: 4661
    • 6c Dundar E, Tanyeli C. Tetrahedron Lett. 2021; 73: 153153
    • 6d Kostenko AA, Kucherenko AS, Zlotin SG. Tetrahedron 2018; 74: 4769
    • 6e Mahto P, Shukla K, Das A, Singh VK. Tetrahedron 2021; 87: 132115
    • 7a Cohen S, Lacher JR, Park JD. J. Am. Chem. Soc. 1959; 81: 3480
    • 7b Quinonero D, Tomas S, Frontera A, Garau C, Ballester P, Costa A, Deya PM. Chem. Phys. Lett. 2001; 350: 331
    • 8a Xie J, Comeau AB, Seto CT. Org. Lett. 2004; 6: 83
    • 8b Lopez C, Vega M, Sanna E, Rotger C, Costa A. RSC Adv. 2013; 3: 7249
    • 9a Lunelli B. Tetrahedron Lett. 2007; 48: 3595
    • 9b Ivanovsky SA, Dorogov MV, Kravchenko DV, Ivachtchenko AV. Synth. Commun. 2007; 37: 2527
    • 10a Lu M, Lu Q-B, Honek JF. Bioorg. Med. Chem. Lett. 2017; 27: 282
    • 10b Avila-Costa M, Donnici CL, Dos Santos JD, Diniz R, Barros-Barbosa A, Cuin A, De Oliveira LF. C. Spectrochim. Acta, Part A 2019; 223: 117354
    • 10c Martin-Escolano R, Marin C, Vega M, Martin-Montes A, Medina-Carmona E, Lopez C, Rotger C, Costa A, Sanchez-Moreno M. Bioorg. Med. Chem. 2019; 27: 865
    • 10d Rostami A, Colin A, Li X.-Y, Chudzinski MG, Lough AJ, Taylor MS. J. Org. Chem. 2010; 75: 3983
  • 11 Sejwal P, Han Y, Shah A, Luk Y.-Y. Org. Lett. 2007; 9: 4897
  • 12 Welton T. Chem. Rev. 1999; 99: 2071
    • 13a Kumar PS. V, Suresh L, Bhargavi G, Basavoju S, Chandramouli GV. P. ACS Sustainable Chem. Eng. 2015; 3: 2944
    • 13b Leadbeater NE, Torenius HM. J. Org. Chem. 2002; 67: 3145
    • 13c Cao D, Zhang Y, Liu C, Wang B, Sun Y, Abdukadera A, Hu H, Liu Q. Org. Lett. 2016; 18: 2000
    • 13d Ranu BC, Banerjee S. Org. Lett. 2005; 7: 3049
    • 13e Jiang N, Ragauskas AJ. Org. Lett. 2005; 7: 3689
    • 13f Aryafard M, Minofar B, Cséfalvay E, Malinová L, Řeha D. J. Mol. Liq. 2021; 344: 117877
  • 14 General Procedure for Synthesis of Squaramides in [bmim]Cl A mixture of squaric acid (0.9 mmol) and nitrogen nucleophile (0.9 mmol) in [bmim]Cl (200 mg) was heated to 85 °C. The progress of the reaction was monitored by TLC; after completion of the reaction, the mixture was allowed to cool to room temperature, and 10 mL of water was added to the mixture. The resultant precipitate was filtered to afford the pure compounds. For products that did not precipitate, the aqueous layer was extracted with ethyl acetate (3 × 10 mL), and the combined organic phases were evaporated. The crude product was purified by flash chromatography on a silica gel column with an ethyl acetate–EtOH mixture. Cyclobuta[b]quinoxaline-1,2(3H,8H)-dione (4b) Dark red solid; yield: 97% ([bmim]Cl). 1H NMR (400 MHz, DMSO-d 6): δ = 6.67–6.64 (dd, J = 5.67, 3.43 Hz, 2 H), 6.37–6.35 (dd, J = 5.68, 3.43 Hz, 2 H). 13C NMR (100 MHz, DMSO-d 6): δ = 178.8, 174.9, 132.2, 125.3, 116.9. IR (KBr): νmax = 3454, 3008, 1791, 1610, 1480, 1358 cm–1. ESI-MS: m/z = 186 [M]+. Decomposition point: 276 °C. 3-(4-Aminophenylamino)-4-hydroxycyclobut-3-ene-1,2-dione (3c) Yellow solid; yield: 99% ([bmim]Cl). 1H NMR (400 MHz, DMSO-d 6): δ = 9.95 (s, 1 H), 7.65–7.63 (d, J = 7.13 Hz, 2 H), 7.11–7.09 (d, J = 6.73 Hz, 2 H). 13C NMR (100 MHz, DMSO-d 6): δ = 191.7, 185.9, 173.0, 145.0, 135.0, 119.8, 119.6. IR (KBr): νmax = 3415, 3026, 3000, 1793, 1639, 1450, 1336, 832 cm–1. ESI-MS: m/z = 204 [M]+. Decomposition point: 201 °C.
  • 15 General Procedure for Synthesis of Squaramides in Aqueous Medium In a 50 mL round-bottomed flask, squaric acid (0.9 mmol), the appropriate water-soluble amine (0.9 mmol), and water (6 mL) were heated at reflux. The progress of the reaction was monitored by TLC. Upon cooling of the reaction mixtures after completion of the reaction, the corresponding squaramides (4a, 4b, 4d, and 3c) precipitated. The resultant precipitate was filtered to afford the pure compounds. For 3h that did not precipitate, the solvent was removed by freeze-drying. The crude product was purified by flash chromatography on a silica gel column with an ethyl acetate–EtOH mixture. 3,4-Bis(4-nitrophenylamino)cyclobut-3-ene-1,2-dione (4d) Red solid; yield: 45% (H2O). 1H NMR (500 MHz, DMSO-d 6): δ = 7.96–7.94 (d, J = 9.05 Hz, 2 H), 6.61–6.59 (d, J = 9.10 Hz, 2 H). 13C NMR (400 MHz, DMSO-d 6): δ = 187.7, 140.6, 127.0, 125.5, 117.7, 113.0. ESI-MS: m/z = 234 [M]+. Decomposition point: 205 °C. IR (KBr): νmax = 3482, 3074, 1791, 1552, 1328, 1304, 842 cm–1.
    • 16a Fu R.-Z, Yang Y, Ma Y.-S, Yang F, Li J.-J, Chai W, Wang Q, Yuan R.-X. Tetrahedron Lett. 2015; 56: 4527
    • 16b Zhang L, Zhao D.-W, Feng M, He B, Chen X.-Y, Wei L.-G, Zhai S.-R, An Q.-D, Sun J. ACS Sustainable Chem. Eng. 2019; 7: 18593
  • 17 Recycling of [bmim]Cl in the Synthesis of Squaramide 4b Aqueous residue containing [bmim]Cl was washed six times with 10 mL of ethyl acetate to remove unreacted substrates. The aqueous layer was vacuum dried to yield [bmim]Cl. The recovered ionic liquid was dried in an oven at 75 °C. The prototypical reaction was reproduced by mixing the recycled [bmim]Cl with 1 (0.9 mmol) and 2b (0.9 mmol) in a 50 mL round-bottomed flask. The mixture was stirred at 85 °C for 3 h and then poured into water (10 mL). The resultant precipitate was filtered to afford 4b. Product yield was calculated. The recycling process has been repeated for the aqueous residue obtained. The efficiency of the recycled [bmim]Cl was assessed based on the product yield of each cycle.