Synlett 2004(2): 0353-0355  
DOI: 10.1055/s-2003-45002
LETTER
© Georg Thieme Verlag Stuttgart · New York

Solid Phase Synthesis of Substituted 2-Amino-4-Pyrrolinones via Spontaneous Postcleavage Cyclization

Anastasia Detsi*a, Pavlos Emirtzogloua, Kyriakos Prousisa, Apostolos N. Nikolopoulosa, Vasso Skouridoub, Olga Igglessi-Markopoulou*a
a Laboratory of Organic Chemistry, School of Chemical Engineering, National Technical University of Athens, Zografou Campus, Athens 157 73, Greece
Fax: +3(210)7723072; e-Mail: ojmark@orfeas.chemeng.ntua.gr;
b Biotechnology Laboratory, School of Chemical Engineering, National Technical University of Athens, Zografou Campus, Athens 157 73, Greece
Further Information

Publication History

Received 1 August 2003
Publication Date:
18 December 2003 (online)

Abstract

The solid phase synthesis of 2-amino-4-pyrrolinones is described. α-Amino acid benzotriazolyl esters attached to 2-chlorotrityl resin are used as acylating agents for the C-acylation of ­cyanoacetates and the polymer-bound C-acylation products are cleaved from the resin using very mild acidic conditions and spontaneously cyclized to the desired heterocyclic compounds. Reaction monitoring was effected by FT-IR on the resin beads.

14

(2-Chlorotrityl resin)-l-Phe-OBt (1, 1.13 mmol/g), (2-chlorotrityl resin)-l-Val-OBt (2, 0.88 mmol/g), (2-chlorotrityl resin)-l-Leu-OBt (3, 1.0 mmol/g) were purchased from NovaBiochem.

15

General Procedure for the Preparation of the Resin-Bound C-Acylation Products 4-7: Methyl or ethyl cyanoacetate (2.5 mmol) was added dropwise to a suspension of sodium hydride (2.5 mmol, 0.1 g of 60% NaH dispersion in oil) in anhyd THF (5 mL) and the thick slurry thus formed was stirred at r.t. for 1 h. The slurry was added to the appropriate resin (0.5 mmol), swelled in anhyd THF (5 mL), and the mixture was gently stirred under Ar overnight, at r.t. The resin was filtered and washed thouroughly alternating with THF (10 mL), MeOH (10 mL) and CH2Cl2 (10 mL; this cycle was repeated 3 times) and then dried in vacuo to provide the resin-bound C-acylation products 4-7. All compounds gave red colour when treated with iron(III) chloride solution.

16

FT-IR (KBr) spectroscopic data for the resin-bound C-acylation compounds 4-7:
Compound 4: 2191 s (CN), 1772 w (C=O ester keto-form), 1698 s (C=O ester enol-form) cm-1.
Compound 5: 2188 s (CN), 1755 w (C=O ester keto-form), 1686 s (C=O ester enol-form) cm-1.
Compound 6: 2188 s (CN), 1734 m (C=O ester keto-form), 1675 s (C=O ester enol-form) cm-1.
Compound 7: 2189 s (CN), 1737 w (C=O ester keto-form), 1678 s (C=O ester enol-form) cm-1.

17

General Procedure for the Cleavage, Cyclization and Isolation of Substituted 2-Amino-4-pyrrolinones 8-11: Cleavage followed by spontaneous cyclization was accomplished by suspending 0.5 mmol of the resin-bound C-acylation compounds 4-7 in 1% TFA in CH2Cl2 (8 mL) and gently stirring under Ar, at r.t. overnight. The resin was filtered and washed thoroughly alternating with CH2Cl2 (10 mL) and MeOH (10 mL; this cycle was repeated 3 times) and the filtrate was evaporated in vacuo. The pure 2-amino-4-pyrrolinones 8-11 were obtained after flash column chromatography using 9:1 CH2Cl2-MeOH.

18

Spectroscopic and physical data for compound 9:
2-Amino-3-ethoxycarbonyl-5-benzyl-4-pyrrolinone(9): 65% yield, mp 202-204 °C (lit. [10] 203-206 °C). 1H NMR (300 MHz, CDCl3/CD3OD): δ = 1.26 (t, 3 H, J = 7.0 Hz), 2.50 and 2.54 (dd, 1 H, J = 14 Hz, J = 9.9 Hz), 3.16 and 3.21 (dd, 1 H, J = 14.0 Hz, J = 3.0 Hz), 3.83 (d, 1 H, J = 7.8 Hz), 4.16 (q, 2 H, J = 7.0 Hz), 7.14-7.24 (m, 5 H). 13C NMR (75 MHz, CDCl3/CD3OD): δ = 14.20, 38.12, 59.28, 63.68, 87.48, 126.67, 128.52, 129.01, 137.49, 165.86, 169.52, 192.44. FT-IR (CH2Cl2): 3008 and 2928 w, br (NH and NH2), 1651 m (C=O ketone and C=O ester) cm-1.

19

The enantiomeric ratios were determined by HPLC analysis using a CHIRALPAK AS column (4.6 × 250 mm), [210 nm, 0.5 mL/min, hexane-EtOH (80:20)].