Thionation of Aminophthalimide Hindered Carbonyl Groups and Application to the Synthesis of 3,6′-Dithionated Pomalidomides

Abstract

Herein, we present a new one-pot procedure for the 3,6′-dithionation of pomalidomide derivatives in which the key 3-position sulfur atom is preferentially installed at the desired (but sterically congested) carbonyl of the aminophthalimide system and with regiochemistry distinct from Lawesson’s Reagent thionation methods. When heated in 1,4-dioxane with P₄S₁₀–pyridine complex, pomalidomides are smoothly and reproducibly converted into their 3,6′-dithionated analogues in roughly 30% isolated yield and at various scales. While detrimental to the desired 3,6′-type outcome when employing Lawesson’s Reagent, we hypothesize that the pomalidomide aniline group instead facilitates P₄S₁₀-type thionation at the otherwise hindered 3-position carbonyl, contributing to the selectivity observed. When paired with classical methods of thionation, this approach offers an interesting and appealing addition to the synthetic toolbox, permitting facile late-stage access to complementary thionated pomalidomides in direct single-flask procedures.

Key words

thionation - pomalidomides - dithionation - aminophthalimides - regioselectivity

Publikationsverlauf

Eingereicht: 22. Dezember 2020

Angenommen nach Revision: 13. März 2021

Artikel online veröffentlicht:
28. April 2021

• References and Notes

• 1a Hoy SM. Drugs 2017; 77: 1897
• 1b Chanan-Khan AA, Swaika A, Paulus A, Kumar SK, Mikhael JR, Rajkumar SV, Dispenzieri A, Lacy MQ. Blood Cancer J. 2013; 3: e143
• 2a Park E, Levis WR, Greig NH, Euisun J, Schuller-Levis G. J. Drugs Dermatol. 2010; 9: 330
• 2b Tweedie D, Frankola KA, Luo W, Li Y, Greig NH. Open Biochem. J. 2011; 5: 37
• 3a Greig NH, Luo W, Tweedie D, Holloway HW, Yu Q.-S, Goetzl EJ. US 10220028B2, 2019
• 3b Lin C.-T, Lecca D, Yang L.-Y, Luo WL, Scerba MT, Tweedie D, Huang P.-S, Jung Y.-J, Kim DS, Yang C.-H, Hoffer BJ, Wang J.-Y, Greig NH. eLife 2020; 9: e54726
• 4 See the Supporting Information for LC/MS profiles of a typical reaction with Lawesson’s Reagent compared with our new method.
• 5 Zhu X, Giordano T, Yu Q.-S, Holloway HW, Perry TA, Lahiri DK, Brossi A, Greig NH. J. Med. Chem. 2003; 46: 5222
• 6a Huang J, Chen B, Zhou B, Han Y. New J. Chem. 2018; 42: 1181
• 6b Geneste H, Ochse M, Drescher K, Dinges J, Jakob C. WO 2014041175, 2014
• 6c Milewska MJ, Bytner T, Polonski T. Synthesis 1996; 1485
• 6d Fang FG, Danishefsky SJ. Tetrahedron Lett. 1989; 30: 2747
• 6e Greig NH, Luo W, Tweedie D, Holloway HW, Yu Q.-S, Goetzl EJ. US 8927725B2, 2015
• 7a Seo M-S, Jang S, Jung H, Kim H. J. Org. Chem. 2018; 83: 14300
• 7b Furet P, Bold G, Hofmann F, Manley P, Meyer T, Altmann K.-H. Bioorg. Med. Chem. Lett. 2003; 13: 2967
• 7c Kuhn B, Mohr P, Stahl M. J. Med. Chem. 2010; 53: 2601
• 7d Takeda T, Suzuki Y, Kawamata J, Noro S.-i, Nakamurac T, Akutagawa T. Phys. Chem. Chem. Phys. 2017; 19: 23905
• 8a Vijayakanth T, Ram F, Praveenkumar B, Shanmuganathan K, Boomishankar R. Chem. Mater. 2019; 31: 5964
• 8b Kolodiazhna AO, Kolodiazhnyi OI. Symmetry 2020; 12: 108
• 8c Longobardi LE, Wolter W, Stephan DW. Angew. Chem. Int. Ed. 2015; 54: 809
• 9 Bergman J, Pettersson B, Hasimbegovic V, Svensson PH. J. Org. Chem. 2011; 76: 1546
• 10 Thionation of Pomalidomide: General ProcedureRepresentative conditions: A vial was charged with 25 mg of pomalidomide (1 equiv) and the appropriate thionating reagent (1.5 equiv of P₄S₁₀-pyridine, or 0.75 equiv of P₄S₁₀). The vial was sealed and placed under N₂. The indicated solvent (2.5 mL) was injected and the mixture was stirred vigorously while the contents were briefly degassed. Then, the reaction was heated to 100 °C and monitored by LC/MS. See the Supporting Information for complete details.
• 11a Ozturk T, Ertas E, Mert O. Chem. Rev. 2010; 110: 3419
• 11b Lecher HZ, Greenwood RA, Whitehouse KC, Chao TH. J. Am. Chem. Soc. 1956; 78: 5018
• 12 We did not isolate these materials or characterize their structures. However, given the nature of the reaction, the observed masses seemed plausible for the incorporation of the indicated amount of sulfur. See the Supporting Information for examples.
• 13 Fortunately, even after 8 hours of reaction time, the P₄S₁₀-pyridine complex/1,4-dioxane system demonstrated 3,6′-DT-pom 3 as the overwhelmingly favored dithionated product and with only traces of other thionated isomers. As was expected, reactions conducted solely with P₄S₁₀ were driven significantly towards presumed trithionated materials in the same period of time. See the Supporting Information for examples.
• 14 Klingsberg E, Papa D. J. Am. Chem. Soc. 1951; 73: 4988
• 15a Kaneko K, Katayama H, Wakabayashi T, Kumonoka T. Synthesis 1988; 152
• 15b Łapucha AR. Synthesis 1987; 256
• 16 4-Amino-2-(2-oxo-6-thioxopiperidin-3-yl)-3-thioxoisoindolin-1-one (3): Typical ProcedureA vial was charged with pomalidomide (1; 25 mg, 0.091 mmol, 1.0 equiv), P₄S₁₀–pyr (52 mg, 0.14 mmol, 1.5 equiv), then sealed and placed under N₂. 1,4-Dioxane (2.5 mL) was added by injection and the mixture was briefly degassed, then stirred and heated at 100 °C. After 8 hours, the reaction changed from cloudy yellow through clear orange to deep red. The mixture was cooled to r.t., and the red reaction liquor was decanted, evaporated to dryness, and dissolved in EtOAc. Then, the dark oily residue remaining in the original reaction vial was stirred gently with EtOAc and sat. aq NaHCO₃. The resulting two-phase mixture was transferred to a separatory funnel and combined with the previous EtOAc solution. The aqueous phase was carefully drained off, and the organic phase was washed successively with water, 0.5 M HCl, and brine, then dried (Na₂SO₄) and concentrated. The crude material was purified by HPLC to give a bright-orange powder; yield: 8.0 mg (29%). ¹H NMR (400 MHz, DMSO-d ₆): δ = 12.63 (s, 1 H), 7.65 (br s, 2 H), 7.50–7.40 (m, 1 H), 7.18 (d, J = 8.5 Hz, 1 H), 7.03 (br s, 1 H), 5.64–5.40 (br m, 1 H*), 3.26–2.78 (br m, 2.5 H*), 2.02 (m, 1 H) (* difficult to resolve). HRMS (MALDI): m/z [M + Na]⁺ calcd for C₁₃H₁₁N₃NaO₂S₂: 328.01849; found: 328.01880. Structural assignments are further supported and confirmed by single-crystal X-ray analysis (see ref. 19 and Supporting Information).
• 17 Hansch C, Leo A, Taft RW. Chem. Rev. 1991; 91: 165
• 18 Spencer JN, Campanella CL, Harris EM, Wolbach WS. J. Phys. Chem. 1985; 89: 1888
• 19 CCDC 2074092 (3), 2074088 (4), 2074087 (14), 2074089 (16), 2074090 (18), and 2074091 (20) contain the supplementary crystallographic data for the compounds listed. The data can be obtained free of charge from The Cambridge Crystallographic Data Centre via www.ccdc.cam.ac.uk/structures.