Synlett 2016; 27(17): 2463-2466
DOI: 10.1055/s-0035-1561495
letter
© Georg Thieme Verlag Stuttgart · New York

Preparation of Diglycolamides via Schotten–Baumann Approach and Direct Amidation of Esters

Andrea Leoncini
Molecular Nanofabrication, University of Twente, P.O. Box 217, 7500 AE Enschede, The Netherlands   Email: w.verboom@utwente.nl
,
Jurriaan Huskens
Molecular Nanofabrication, University of Twente, P.O. Box 217, 7500 AE Enschede, The Netherlands   Email: w.verboom@utwente.nl
,
Willem Verboom*
Molecular Nanofabrication, University of Twente, P.O. Box 217, 7500 AE Enschede, The Netherlands   Email: w.verboom@utwente.nl
› Author Affiliations
Further Information

Publication History

Received: 03 May 2016

Accepted after revision: 11 June 2016

Publication Date:
13 July 2016 (online)


Abstract

Diglycolyl chlorides, commercially available or obtained from the corresponding dicarboxylic acids, have been converted into the corresponding diamides by reaction with a wide range of amines in an organic-aqueous biphasic system (Schotten–Baumann approach) in high yields. Treatment with poly(4-styrenesulfonic acid) afforded the pure compounds. Substituted diglycolyl diesters, obtained by coupling of commercial monoesters, were transformed directly in the corresponding diamides in the presence of aluminum trichloride as catalyst in good yields.

 
  • References and Notes

  • 1 Ansari SA, Pathak P, Mohapatra PK, Manchanda VK. Chem. Rev. 2012; 112: 1751
  • 2 Iqbal M, Huskens J, Verboom W, Sypula M, Modolo G. Supramol. Chem. 2010; 22: 827
  • 3 Galán H, Zarzana CA, Wilden A, Núñez A, Schmidt H, Egberink RJ. M, Leoncini A, Cobos J, Verboom W, Modolo G, Groenewold GS, Mincher BJ. Dalton Trans. 2015; 44: 18049
    • 4a Leoncini A, Mohapatra PK, Bhattacharyya A, Raut DR, Sengupta A, Verma PK, Tiwari N, Bhattacharyya D, Jha S, Wouda AM, Huskens J, Verboom W. Dalton Trans. 2016; 45: 2476
    • 4b Jańczewski D, Reinhoudt DN, Verboom W, Hill C, Allignol C, Duchesne M.-T. New J. Chem. 2008; 32: 490
    • 5a Iqbal M, Mohapatra PK, Ansari SA, Huskens J, Verboom W. Tetrahedron 2012; 68: 7840
    • 5b Mohapatra PK, Sengupta A, Iqbal M, Huskens J, Verboom W. Inorg. Chem. 2013; 52: 2533
  • 6 Sasaki Y, Sugo Y, Suzuki S, Tachimori S. Solvent Extr. Ion Exch. 2001; 19: 91
  • 7 Chapron S, Marie C, Arrachart G, Miguirditchian M, Pellet-Rostaing S. Solvent Extr. Ion Exch. 2015; 33: 236
    • 8a Schotten C. Ber. Dtsch. Chem. Ges. 1884; 17: 2544
    • 8b Baumann E. Ber. Dtsch. Chem. Ges. 1886; 19: 3218
    • 9a Wilk A, Chmielewski MK, Grajkowski A, Phillips LR, Beaucage SL. J. Org. Chem. 2002; 67: 6430
    • 9b Bigg DC. H, Lesimple P. Synthesis 1992; 277
  • 10 General Procedure 1: Synthesis of Diglycolamides by Schotten–Baumann Reaction Diglycolyl chloride (0.85 g, 5 mmol) in Et2O (30 mL) was added dropwise to a solution of amine (30 mmol) and NaOH (1.2 g, 30 mmol) in water (36 mL) at 0 °C over 30 min. The mixture was stirred at 0 °C for 2 h, and then the phases were separated. The aqueous layer was saturated with NaCl and extracted with Et2O (3 × 30 mL). An aqueous solution of 10% HCl (20 mL) was added to the combined organic layers. The mixture was shaken vigorously to facilitate formation of clumps of ammonium salts, floating between the two phases. The organic layer was washed two more times with HCl solution (20 mL) and then filtered through a glass frit (G3). A poly(4-styrenesulfonic acid) solution (4 wt%, 25 mL) in water was added to the organic layer. The mixture was shaken vigorously to facilitate formation of polymeric salts as an amorphous material floating between the layers. The organic layer was washed with water and then separated from the polymeric salt. It was dried with MgSO4, whereupon the solvent was removed by vacuum evaporation to afford the DGAs, which had a purity of ≥97% according to the 1H NMR spectra.
  • 11 Liu J.-F, Yang H.-J, Wang W, Li Z. J. Chem. Eng. Data 2008; 53: 2189
  • 12 Horwitz EP, McAlister DR, Bond AH, Barrans RE. Jr. Solvent Extr. Ion Exch. 2005; 23: 319
  • 13 In the case of bis(2-ethylhexyl)amine, after the separation of the phases, the organic layer was evaporated. Poly(4-styrenesulfonic acid) solution (18 wt%, 3 mL) was added directly to the crude material. The mixture was shaken to facilitate formation of polymeric salts and then extracted with Et2O (3 × 50 mL). The combined organic layers were washed with water (30 mL), dried with MgSO4, whereupon the solvent was removed by vacuum evaporation to afford the DGA.
  • 14 General Procedure 2: In situ Preparation of Diacyl Chlorides DMF (5 drops) was added to a solution of a substituted dicarboxylic acid (1 mmol) in pure oxalyl chloride (2 mL). The reaction mixture was stirred under argon for 2 h and then oxalyl chloride was removed by vacuum evaporation. The diacyl chloride obtained was immediately dissolved in Et2O (6 mL) and used for the synthesis of DGAs according to General Procedure 1. The DGA had a purity of ≥97% according to the 1H NMR spectra.
  • 15 1H NMR (400 MHz, CDCl3): δ = 4.52 (q, J = 6.6 Hz, 1 H, CH3CHO), 4.28 and 3.95 [AB-q, J = 13.5 Hz, 1 H, OCH2 C(O)], 3.50–3.25 (m, 8 H, NCH2 CH3), 1.41 (d, J = 6.6 Hz, 3 H, CH3 CHO), 1.18, 1.16, 1.13, and 1.12 (t, J = 7.1 Hz, 3 H, NCH2CH 3). 13C NMR (101 MHz, CDCl3): δ = 171.9, 169.3, 73.5, 67.5, 66.0, 41.9, 41.8, 40.8, 18.5, 15.4, 14.5, 14.3, 13.0, 12.9. ESI-MS: m/z = 259.3 [M + H]+. HRMS: m/z calcd for C13H27N2O3: 259.1943 [M + H]+; found: 259.1992.
  • 16 1H NMR (400 MHz, CDCl3): δ = 4.29 (q, J = 6.7 Hz, 2 H, CH3CHO), 3.54–3.44 (m, 2 H, NCH2 CH3), 3.41–3.20 (m, 6 H, NCH2 CH3), 1.41 (d, J = 6.7 Hz, 6 H, CH3 CHO), 1.14 and 1.12 (t, J = 7.1 Hz, 6 H, NCH2CH 3). 13C NMR (101 MHz, CDCl3): δ = 171.6, 71.8, 41.2, 40.5, 19.2, 14.7, 13.0. ESI-MS: m/z = 273.2 [M + H]+. HRMS: m/z calcd for C14H29N2O3: 272.2153 [M + H]+; found: 272.2173.
  • 17 General Procedure 3: Synthesis of Diglycolamides by Direct Amidation of Diesters Et3N (2.13 g, 21.05 mmol) in CH2Cl2 (5 mL) was added dropwise to a suspension of AlCl3 (2.1 g, 15.79 mmol) in CH2Cl2 (8 mL) at 0 °C. The reaction mixture was stirred for 15 min and then warmed to room temperature. A solution of diester (5.26 mmol) and amine (13.68 mmol) in CH2Cl2 (3 mL) was added dropwise to the reaction mixture over a period of 30 min. After stirring for 2 h, the reaction mixture was quenched with a solution of Na2CO3 (14 g) in water (50 mL), and then EtOAc (60 mL) was added. The aqueous phase was extracted with EtOAc (3 × 100 mL) and the combined organic layers were dried with MgSO4. After evaporation of the solvent, the compound was purified by flash column chromatography [SiO2, hexanes–EtOAc (3:1 to 1:1) for long-chain amines; SiO2, CH2Cl2–EtOH (95:5 to 80:20) for intermediate and small amines]. The DGA had a purity of ≥99% according to the 1H NMR spectra.
    • 18a Jung MF, Lyster MA. J. Am. Chem. Soc. 1977; 99: 968
    • 18b Hay RW, Porter LJ, Morris PJ. Aust. J. Chem. 1966; 19: 1197
  • 19 Otera J. Chem. Rev. 1993; 93: 1449