Synlett 2013; 24(3): 305-312
DOI: 10.1055/s-0032-1317540
cluster
© Georg Thieme Verlag Stuttgart · New York

Evolution of the Process for the Preparation of a Selective ErbB VEGF Receptor Inhibitor

Boguslaw Mudryk*
,
Amit Joshi*
,
Adrian Ortiz
,
Ian S. Young
,
James R. Sawyer
,
Bin Zheng
,
Masano Sugiyama
,
Zhongping Shi
,
Jale Müslehiddinoğlu
,
R. Michael Corbett
,
David R. Kronenthal
,
David A. Conlon
Further Information

Publication History

Received: 01 October 2012

Accepted: 17 October 2012

Publication Date:
23 November 2012 (online)


Abstract

An efficient synthetic route to the potent and selective ErbB VEGF receptor inhibitor, BMS-690514 (1) is described. Strategic modifications in both approach and procedure addressed several issues, which led to a safe, efficient, and economical process for the preparation of multi-kilogram quantities of 1. The convergent route involves alkylation of a suitably protected (3R,4R)-4-aminopiperidin-3-ol with the triethyl(alkyl)ammonium salt of a functionalized pyrrolotriazine 3a followed by deprotection to provide 1 as the crystalline free base.

Supporting Information

 
  • References and Notes

  • 1 New address: Celgene Corp., Basking Ridge, NJ, USA.
  • 2 New address: Dupont, Newark, DE, USA.

    • For Bristol-Myers Squibb patents covering 1, see:
    • 3a Wei C, Norris DJ. Crystalline forms of (3R,4R)-4-amino-1-({4-[(3-methoxyphenyl)amino]pyrrolo[2,1-f][1,2,4]triazin-5-yl}methyl)piperidine-3-ol; . US Patent 0191375, 2007
    • 3b Fink BE, Gavai AV, Vite GD, Chen P, Mastalerz H, Norris DJ, Tokarshi JS, Zhao Y, Han W.-C. Preparation of pyrrolo[2,1-f][1,2,4]triazine derivatives as HER1, HER2, HER4 kinase inhibitors and antiproliferative agents; . WO Patent 066176, 2005
    • 3c Fink BE, Gavai AV, Vite GD, Chen P, Mastalerz H, Norris DJ, Tokarski JS, Zhao Y, Han W.-C Pyrrolotriazine Compounds as Kinase Inhibitors; US Patent 7,141,571 B2, 2006

      For earlier discovery work in the HER and VEGFR program, see:
    • 4a Borzilleri RM, Cai Z, Ellis C, Fargnoli J, Fura A, Gerhardt B, Goyal B, Hunt JT, Mortillo S, Qian L, Tokarski J, Vyas V, Barri Wautlet B, Zhenga X, Bhidea RS. Bioorg. Med. Chem. Lett. 2005; 15: 1429
    • 4b Fink BE, Vite GD, Mastalerz H, Kadow JH, Kim S.-H, Leavitt KJ, Du K, Crews D, Mitt T, Wong TW, Hunt JT, Vyas DM, Tokarski JS. Bioorg. Med. Chem. Lett. 2005; 17: 4774
    • 4c Mastalerz H, Chang M, Chen P, Dextraze P, Fink BE, Gavai A, Goyal B, Han W.-C, Johnson W, Langley D, Lee FY, Marathe P, Mathur A, Oppenheimer S, Ruediger E, Tarrant J, Tokarski JS, Vite GD, Vyas DM, Wong H, Wong TW, Zhang H, Zhang G. Bioorg. Med. Chem. Lett. 2007; 17: 2036
    • 4d Mastalerz H, Chang M, Gavai A, Johnson W, Langley D, Lee FY, Marathe P, Mathur A, Oppenheimer S, Tarrant J, Tokarski JS, Vite GD, Vyas DM, Wong H, Wong TW, Zhang H, Zhang G. Bioorg. Med. Chem. Lett. 2007; 17: 2828
    • 4e Mastalerz H, Chang M, Chen P, Fink BE, Gavai A, Han W.-C, Johnson W, Langley D, Lee FY, Leavitt K, Marathe P, Norris D, Oppenheimer S, Sleczka B, Tarrant J, Tokarski JS, Vite GD, Vyas DM, Wong H, Wong TW, Zhang H, Zhang G. Bioorg. Med. Chem. Lett. 2007; 17: 4947
    • 4f Cai Z.-W, Wei D, Borzilleri RM, Qian L, Kamath A, Mortillo S, Wautlet B, Henley BJ, Jeyaseelan R, Tokarski J, Hunt JT, Bhide RS, Fargnoli J, Lombardo LJ. Bioorg. Med. Chem. Lett. 2008; 18: 1354
    • 4g Gavai AV, Fink BE, Fairfax DJ, Martin GS, Rossiter LM, Holst CL, Kim S.-H, Leavitt KJ, Mastalerz H, Han W.-C, Norris D, Goyal B, Swaminathan S, Patel B, Mathur A, Vyas DM, Tokarski JS, Yu C, Oppenheimer S, Zhang H, Marathe P, Fargnoli J, Lee FY, Wong TW, Vite GD. J. Med. Chem. 2009; 52: 6527
    • 4h Fink BE, Norris D, Mastalerz H, Chen P, Goyal B, Zhao Y, Kim S.-H, Vite GD, Lee FY, Zhang H, Oppenheimer S, Tokarski JS, Wong TW, Gavai AV. Bioorg. Med. Chem. Lett. 2011; 21: 781
  • 5 Zheng B, Conlon DA, Corbett RM, Chau M, Hsieh D.-M, Yeboah A, Hsieh D, Müslehiddinoğlu J, Gallagher WP, Simon J.-N, Burt J. Org. Process Res. Dev. 2012; 16: 1846
    • 6a Langlois N, Calvez O. Synth. Commun. 1998; 28: 4471
    • 6b For other examples of this type of ring expansion see: Cossy J, Dumas C, Michel P, Pardo GM. Tetrahedron Lett. 1995; 36: 549
    • 6c See also: Cossy J, Dumas C, Pardo GM. Synlett 1997; 905
  • 7 Thottathil JK, Moniot JL, Mueller RH, Wong MK. Y, Kissick TP. J. Org. Chem. 1986; 51: 3140
  • 8 Use of NMP produced approximately 1 LCAP of the Friedel–Crafts-derived impurity. As a comparison, CH2Cl2, which was the worst performer, produced ca. 12 LCAP of the impurity.
  • 9 The structure of 8 was proposed based on LCMS data. Specifically, the C–N connectivity cannot be confirmed.
  • 10 Loss of acetonitrile and triethylamine, which form a low-boiling azeotrope (b.p. 55 °C), was attributed to the nitrogen sweep used to ensure efficient inertion and prevent formation of colored impurities. This issue was resolved during development runs by using a nitrogen blanket, and was not observed in the pilot plant batches.
  • 11 Carbon treatment after formation of 5 resulted in ca. 5% Boc deprotection even at r.t. and, as a result, the carbon treatment should be implemented during processing of 6 if required.
  • 12 For a discussion on genotoxic impurities, see: Snodin G. J. Regul. Toxicol. Pharmacol. 2006; 45: 79
  • 13 The linkage of the tert-butyl group to oxygen was confirmed by HMBC NMR experiments.
  • 14 The aqueous carbonate was used in the first iteration of the process to neutralize hydrogen bromide, a byproduct derived from des-bromination of the brominated penultimate derivative at the pyrrole fragment; see ref. 4. Although the carbonate was not needed, it was retained in the revised process to accommodate regulatory requirements and keep the key process parameters unchanged.
  • 15 In general, impurities (organic, residual solvents, or inorganic) do not add any therapeutic value, may present toxicity concerns and are therefore controlled to very low levels in the active pharmaceutical ingredient.
  • 16 Nacario R, Kotakonda S, Fouchard DM. D, Tillekeratne LM. V, Hudson RA. Org. Lett. 2005; 7: 471
  • 17 From a procedural perspective, it was noted that this impurity continued to form after the reaction reached its endpoint. As a result, we utilized an internal Raman probe, rather than HPLC after a set amount of time. This allowed us to stop the reaction when it was complete, minimizing additional conversion of 1 into 12.
  • 18 It should be noted that we set a more stringent requirement of 250 ppm m-anisidine in isolated 6 (see above) to ensure that safe levels of this impurity would be present in the drug substance.
    • 19a Young IS, Ortiz A, Sawyer JR, Conlon DA, Buono FG, Leung SW, Burt JL, Sortore E. Org. Process Res. Dev. 2012; 16: 1558
    • 19b Ortiz A, Young IS, Sawyer JR, Hsiao Y, Singh A, Sugiyama M, Corbett RM, Chau M, Shi Z, Conlon DA. Org. Biomol. Chem. 2012; 10: 5253
    • 19c First generation: 7 steps, 3 isolations, 26 operations, 22% overall yield. Second generation: 5 steps, 2 isolations, 10 operations, 29% overall yield resulting in 60% reduction in cost. Number of steps refers to number of intermediates that could be isolated.
  • 20 Laduron F, Tamborowski V, Moens L, Horváth A, De Smaele D, Leurs S. Org. Process Res. Dev. 2005; 9: 102
  • 21 Gil-Av E. J. Am. Chem. Soc. 1959; 81: 1602
  • 22 First generation: three steps, 62% yield, three N-alkyl impurities. Second generation: two steps, 67% yield, no N-alkyl impurities. Number of steps refers to number of intermediates that could be isolated.