Metal-Free Selective Air-Oxidation of Sulfides to Sulfoxides Using 2,2′-Azobis-(2,4-dimethyl-4-methoxyvaleronitrile) (V-70) and Isobutyraldehyde

Abstract

Selective oxidation of sulfides to sulfoxides using ‘air’ was achieved using a combination of 2,2′-azobis-(2,4-dimethyl-4-methoxyvaleronitrile) (a radical initiator) and isobutyraldehyde (a co-oxidant). Various sulfides were successfully converted into their corresponding sulfoxides using this method. This approach promotes a sustainable oxidation process by excluding harmful oxidants, such as peroxides and metal reagents.

Key words

air - oxidation - V-70 - radicals - sulfoxide

Publikationsverlauf

Eingereicht: 10. Oktober 2024

Angenommen nach Revision: 29. Oktober 2024

Accepted Manuscript online:
29. Oktober 2024

Artikel online veröffentlicht:
15. November 2024

• References and Notes

• 1a Chen X, Li Z, Sun X, Ma H, Chen X, Ren J, Hu K. Synthesis 2011; 3991
• 1b Ilardi EA, Vitaku E, Njardarson JT. J. Med. Chem. 2014; 57: 2832
• 1c Surur AS, Schulig L, Link A. Arch. Pharm. (Weinheim) 2019; 352: e1800248
• 1d Matavos-Aramyan S, Soukhakian S, Jazebizadeh MH. Phosphorus, Sulfur Silicon Relat. Elem. 2020; 195: 181
• 2 Mukaiyama T, Yamada T. Bull. Chem. Soc. Jpn. 1995; 68: 17
• 3a Uchida T, Katsuki T. J. Synth. Org. Chem., Jpn. 2013; 71: 1126
• 3b Casado-Sanchez A, Gomez-Ballesteros R, Tato F, Soriano FJ, Pascual-Coca G, Cabrera S, Aleman J. Chem. Commun. 2016; 52: 9137

For selected examples, see:
• 4a Skolia E, Gkizis PL, Kokotos CG. ChemPlusChem 2022; 87: e202200008
• 4b Spyropoulou CK, Skolia E, Flesariu DF, Zissimou GA, Gkizis PL, Triandafillidi I, Athanasiou M, Itskos G, Koutentis PA, Kokotos CG. Adv. Synth. Catal. 2023; 365: 2643
• 5a Gu X, Li X, Chai Y, Yang Q, Li P, Yao Y. Green Chem. 2013; 15: 357
• 5b Zhang H, Wang G. Tetrahedron Lett. 2014; 55: 56
• 6a McNesby JR, Heller CA. Jr. Chem. Rev. 1954; 54: 325
• 6b Imamura J, Wakasa R, Kataoka K, Kubota K, Yamaguchi S, Saito T. Bull. Jpn. Pet. Inst. 1971; 13: 273
• 6c Chauhan J, Ravva MK, Sen S. Org. Lett. 2019; 21: 6562

For selected examples, see:
• 7a Nagata T, Imagawa K, Yamada T, Mukaiyama T. Bull. Chem. Soc. Jpn. 1995; 68: 3241
• 7b Dell’Anna MM, Mastrorilli P, Nobile CF. J. Mol. Catal. A: Chem. 1996; 108: 57
• 7c Zhou X.-T, Ji H.-B, Cheng Z, Xu J.-C, Pei L.-X, Wang L.-F. Bioorg. Med. Chem. Lett. 2007; 17: 4650
• 7d Zhang P, Wang Y, Li H, Antonietti M. Green Chem. 2012; 14: 1904
• 8 Wang L, Zhang Y, Yao J, Li H. Catal. Lett. 2022; 152: 1131
• 9a Kita Y, Sano A, Yamaguchi T, Oka M, Gotanda K, Matsugi M. Tetrahedron Lett. 1997; 38: 3549
• 9b Kita Y, Gotanda K, Murata K, Suemura M, Sano A, Yamaguchi T, Oka M, Matsugi M. Org. Process Res. Dev. 1998; 2: 250
• 10 Matsugi M, Gotanda K, Ohira C, Suemura M, Sano A, Kita Y. J. Org. Chem. 1999; 64: 6928
• 11 Kato Y, Kanoh M, Kobayashi H, Shioiri T, Matsugi M. Molecules 2024; 29: 966
• 12 A subsequent experiment revealed that the air balloon was not essential in this oxidation reaction. Selective oxidation of sulfide to sulfoxide could be achieved under open-air conditions by modifying the system to prevent solvent volatilization, specifically by capping the vessel with a perforated septum (which is not shown in Table 2). The reaction conditions: 24 hours; conversion 96%, with a product ratio of 2a/3a = 98:2.
• 13 Köckritz A, Blumenstein M, Martin A. Eur. J. Lipid Sci. Technol. 2008; 110: 581
• 14 General Procedure: Under air atmosphere, V-70 (12.3 mg, 0.04 mmol, 20 mol%) was added to a suspension of sulfide (0.2 mmol, 1.0 equiv) and isobutyraldehyde (18.3 µL, 0.2 mmol, 1.0 equiv) in EtOAc (2 mL) and the mixture was stirred at room temperature. Upon completion, the reaction mixture was diluted with EtOAc and washed with sat. NaHCO₃ aq. and brine. The organic layer was dried over Na₂SO₄, filtered, and concentrated under reduced pressure. The conversion was determined by ¹H NMR analysis of the crude product.
• 15 Analytical data for sulfoxides are provided in the Supporting Information.