Subscribe to RSS
DOI: 10.1055/a-1344-6040
Ni(COD)(DMFU): A Heteroleptic 16-Electron Precatalyst for 1,2-Diarylation of Alkenes
This work was financially supported by Bristol Myers Squibb and the National Science Foundation (CHE-1800280 and DGE-1842471, Graduate Research Fellowship to O.A).
Abstract
Electron-deficient olefin (EDO) ligands are known to promote a variety of nickel-catalyzed cross-coupling reactions, presumably by accelerating the reductive elimination step and preventing undesired β-hydride elimination. While there is a growing body of experimental and computational evidence elucidating the beneficial effects of EDO ligands, significant gaps remain in our understanding of the underlying coordination chemistry of the Ni–EDO species involved. In particular, most procedures rely on in situ assembly of the active catalyst, and there is a paucity of preligated Ni–EDO precatalysts. Herein, we investigate the 16-electron, heteroleptic nickel complex, Ni(COD)(DMFU), and examine the performance of this complex as a precatalyst in 1,2-diarylation of alkenes.
Supporting Information
- Supporting information for this article is available online at https://doi.org/10.1055/a-1344-6040.
- Supporting Information
Primary Data
- Primary Data
The primary data generated may be cited with the DOI 10.5281/zenodo.5533864.
Publication History
Received: 18 November 2020
Accepted after revision: 02 January 2021
Accepted Manuscript online:
02 January 2021
Article published online:
28 January 2021
© 2021. Thieme. All rights reserved
Georg Thieme Verlag KG
Rüdigerstraße 14, 70469 Stuttgart, Germany
-
References and Notes
- 1a Hu X. Chem. Sci. 2011; 2: 1867
- 1b Mesganaw T, Garg NK. Org. Process Res. Dev. 2013; 17: 29
- 1c Tasker SZ, Standley EA, Jamison TF. Nature 2014; 509: 299
- 1d Ananikov VP. ACS Catal. 2015; 5: 1964
- 1e Khake SM, Chatani N. Trends Chem. 2019; 1: 524
- 1f Derosa J, Apolinar O, Kang T, Tran VT, Engle KM. Chem. Sci. 2020; 11: 4287
- 2 For a review on olefin ligands in catalysis, see: Johnson JB, Rovis T. Angew. Chem. Int. Ed. 2008; 47: 840
- 3 For a historical review of nickel–olefin complexes, see: Wilke G. Angew. Chem., Int. Ed. Engl. 1988; 27: 185
- 4a Wilke G. Angew. Chem. 1960; 72: 581
- 4b Schrauzer GN, Thyret H. Z. Naturforsch. B 1962; 17: 73
- 4c Wilke G, Müller EW, Kröner M, Heimbach P, Breil H. DE Patent 1191375, 1965
- 4d Bogdanović B, Kröner M, Wilke G. Justus Liebigs Ann. Chem. 1966; 699: 1
- 4e Nattmann L, Saeb R, Nöthling N, Cornella J. Nat. Catal. 2020; 3: 6
- 4f Tran VT, Li Z.-Q, Apolinar O, Derosa J, Joannou MV, Wisniewski SR, Eastgate MD, Engle KM. Angew. Chem. Int. Ed. 2020; 59: 7409
- 4g Nattmann L, Cornella J. Organometallics 2020; 39: 3295
- 5a Giovannini R, Stüdemann T, Dussin G, Knochel P. Angew. Chem. Int. Ed. 1998; 37: 2387
- 5b Giovannini R, Knochel P. J. Am. Chem. Soc. 1998; 120: 11186
- 5c Giovannini R, Stüdemann T, Devasagayaraj A, Dussin G, Knochel P. J. Org. Chem. 1999; 64: 3544
- 5d Jensen AE, Knochel P. J. Org. Chem. 2002; 67: 79
- 5e Nielsen DK, Huang C.-Y, Doyle AG. J. Am. Chem. Soc. 2013; 135: 13605
- 5f Huang C.-Y, Doyle AG. J. Am. Chem. Soc. 2015; 137: 5638
- 5g Estrada JG, Williams WL, Ting SI, Doyle AG. J. Am. Chem. Soc. 2020; 142: 8928
- 6a Huang C.-Y, Doyle AG. J. Am. Chem. Soc. 2012; 134: 9541
- 6b Derosa J, Kleinmans R, Tran VT, Karunananda MK, Wisniewski SR, Eastgate MD, Engle KM. J. Am. Chem. Soc. 2018; 140: 17878
- 6c Apolinar O, Tran VT, Kim N, Schmidt MA, Derosa J, Engle KM. ACS Catal. 2020; 10: 14234
- 7a Clement ND, Cavell KJ, Ooi L.-l. Organometallics 2006; 25: 4155
- 7b Berini C, Winkelmann OH, Otten J, Vicic DA, Navarro O. Chem. Eur. J. 2010; 16: 6857
- 7c Nett AJ, Cañellas S, Higuchi Y, Robo MT, Kochkodan JM, Haynes MT II, Kampf JW, Montgomery J. ACS Catal. 2018; 8: 6606
- 8 The transition state for reductive elimination with dimethyl fumarate (DMFU) displays significantly lower activation energy than transition states with ethylene- or solvent-bound nickel (ΔG‡ = 2.6 kcal/mol compared to ΔG‡ = 14.6 kcal/mol or ΔG‡ = 37.4 kcal/mol, respectively; see ref. 6b for detail).
- 9 Büch HM, Binger P, Krüger C. Organometallics 1984; 3: 1504
- 10a Brauer DJ, Krüger C. J. Organomet. Chem. 1972; 44: 397
- 10b Fischer K, Jonas K, Misbach P, Stabba R, Wilke G. Angew. Chem., Int. Ed. Engl. 1973; 12: 943
- 10c Fischer K, Jonas K, Wilke G. Angew. Chem., Int. Ed. Engl. 1973; 12: 565
- 10d Brauer DJ, Krüger C. J. Organomet. Chem. 1976; 122: 265
- 11 Kooijman H, Sprengers JW, Agerbeek MJ, Elsevier CJ, Spek AL. Acta Crystallogr., Sect. E: Struct. Rep. Online 2004; 60: o917
- 12 For comparison, values for related complexes are as follows: +0.21065 for Ni(COD)(DQ) and +0.09120 for Ni(COD)2 (see ref. 4c).
- 13 The sum of second order perturbations from Ni(LP) to π*(C=C) of both DMFU and COD is much greater than the corresponding value for Ni(COD)(DQ), which was 82.62 kcal/mol.
- 14 In the standard procedure in ref. 6c, 20 mol% Ni(COD)2 and 15 mol% DMFU are used. In order to make a more direct comparison to Ni(COD)(DMFU), in conditions A we used 20 mol% loading of DMFU under otherwise identical conditions to ref. 6c. Empirically, we have found that 15–20 mol% DMFU leads to similar yields (±5%) in the extraneous period in situ coordination protocol.
- 15 Representative Example of 1,2-Diarylation of Alkenes (Table [1], Entry 2) To a 1-dram (4 mL) vial equipped with a Teflon-coated magnetic stir bar were added the alkene substrate (0.1 mmol) and the appropriate aryl boronic acid neopentylglycol ester (0.3 mmol). The vial was then equipped with a septum cap and brought into the glovebox. In the glovebox, anhydrous NaOH (0.3 mmol), the appropriate aryl iodide electrophile (0.3 mmol), a stock solution of 4,4′-di-tert-butylbiphenyl (internal standard; 0.2 mL of 0.25 mM solution in sec-butanol), and anhydrous sec-butanol (0.3 mL) were added. For conditions A, DMFU (20 mol%) and Ni(COD)2 (20 mol%) were added, and for conditions B, Ni(COD)(DMFU) (20 mol%) was added, respectively. The vial was sealed with a screw-top cap, removed from the glovebox, and left to stir at room temperature for 16 h. After this time, the reaction mixture was quenched with sat. aq. NaHCO3 (1 mL), diluted with diethyl ether (2 mL), and stirred vigorously for 20 min. Next, the organic and aqueous phases were separated, and the aqueous phase was further extracted with diethyl ether (3 × 2 mL). The combined organic layers were dried over MgSO4, filtered, and concentrated under vacuum. The resulting crude mixture was analyzed by 1H NMR spectroscopy in CDCl3, displaying 49% formation of S21 (see the SI) from Conditions A, and 67% from Conditions B. 1H NMR yields for diarylation were determined by integrating the 1H resonances for the products relative to the resonances of internal standard (0.50 mmol; 18 H integrated to 0.90) at δ = 1.37 ppm in CDCl3. Purification by preparative thin-layer chromatography (PTLC; 20% acetone in hexanes) afforded S21 as a colorless oil, which solidifies upon standing or cooling (33 mg, 70%; conditions B). 1H NMR (600 MHz, CDCl3): δ = 7.85 (d, J = 7.9 Hz, 2 H), 7.73 (d, J = 8.4 Hz, 2 H), 7.12 (dpd, J = 14.1, 7.9, 3.3 Hz, 3 H), 7.07–7.01 (m, 2 H), 6.85–6.78 (m, 2 H), 6.75–6.68 (m, 2 H), 4.29 (d, J = 6.0 Hz, 1 H), 3.81 (s, 3 H), 2.97–2.83 (m, 2 H), 2.77–2.65 (m, 2 H), 2.10 (ddd, J = 15.2, 10.2, 5.3 Hz, 1 H), 1.72 (ddd, J = 13.0, 10.3, 5.5 Hz, 1 H), 1.18 (s, 3 H). 13C NMR (150 MHz, CDCl3): δ = 158.03, 143.73, 137.68, 137.32, 134.43 (q, J = 33.1 Hz), 130.66, 127.76, 127.70, 127.67, 123.12 (q, J = 273.50 Hz), 113.80, 55.40, 51.22, 42.06, 40.65, 39.93, 23.44. 19F NMR (376 MHz, CDCl3): δ = –65.74. HRMS (ESI-TOF): m/z calcd for C25H25F3NO2S [M – H]–: 476.1607; found: 476.1506.
- 16 20 mol% COD (1 equiv to [Ni]) was added into a trial run under conditions B in order to reproduce the overall [COD] under conditions A. This experiment resulted in 65% NMR yield, which is within 5% of the result without additional COD.
For representative reviews, see:
For representative nickel–olefin complexes that find use as precatalysts:
For representative applications of electron-deficient olefin ligands in nickel-catalyzed cross-coupling, see:
Examples of DMFU as an enabling ligand in nickel catalysis:
DMFU has also been used as a stabilizing ligand in NHC–Ni(0) precatalysts: