J Neurol Surg A Cent Eur Neurosurg 2019; 80(01): 034-038
DOI: 10.1055/s-0038-1655762
Surgical Technique
Georg Thieme Verlag KG Stuttgart · New York

Optimal Parameters for Intervertebral Disk Resection Using Aqua-Plasma Beams

Sung-Young Yoon
1   Plasma Technology Research Center, National Fusion Research Institute, Gunsan, The Republic of Korea
,
Gon-ho Kim
2   Department of Nuclear Engineering, Seoul National University, Seoul, The Republic of Korea
,
Yushin Kim
3   Department of Sports, Health and Rehabilitation, Cheongju University, Cheongju, Chungcheongbuk-do, The Republic of Korea
,
Nack Hwan Kim
4   Department of Physical Medicine and Rehabilitation, Korea University Medical Center, Seoul, The Republic of Korea
,
Sangheon Lee
4   Department of Physical Medicine and Rehabilitation, Korea University Medical Center, Seoul, The Republic of Korea
,
Christina Kawai
5   John A. Burns School of Medicine, University of Hawaii at Manoa, Hawaii, United States
,
Youngki Hong
6   Sports Medicine, Cheongju University, Cheongju, The Republic of Korea
› Author Affiliations
Further Information

Publication History

29 September 2017

29 March 2018

Publication Date:
14 June 2018 (online)

Preview

Abstract

Objective A minimally invasive procedure for intervertebral disk resection using plasma beams has been developed. Conventional parameters for the plasma procedure such as voltage and tip speed mainly rely on the surgeon's personal experience, without adequate evidence from experiments. Our objective was to determine the optimal parameters for plasma disk resection.

Methods Rate of ablation was measured at different procedural tip speeds and voltages using porcine nucleus pulposi. The amount of heat formation during experimental conditions was also measured to evaluate the thermal safety of the plasma procedure.

Results The ablation rate increased at slower procedural speeds and higher voltages. However, for thermal safety, the optimal parameters for plasma procedures with minimal tissue damage were an electrical output of 280 volts root-mean-square (Vrms) and a procedural tip speed of 2.5 mm/s.

Conclusion Our findings provide useful information for an effective and safe plasma procedure for disk resection in a clinical setting.

Financial Disclosure

Coauthor Sangheon Lee invented the procedure and has ∼ 4.0% royalty interest in the device. The other contributing authors have no conflicts of interest to disclose. This study was supported by the Brain Korea 21 Plus Project (No. 21A20130012821), Republic of Korea.