Subscribe to RSS
Please copy the URL and add it into your RSS Feed Reader.
https://www.thieme-connect.de/rss/thieme/en/10.1055-s-00000067.xml
Download PDF
Semin Hear 2014; 35(04): 329-345
DOI: 10.1055/s-0034-1390162
DOI: 10.1055/s-0034-1390162
Bone-Conduction Calibration
Further Information
Publication History
Publication Date:
28 October 2014 (online)
Abstract
The audiogram is one of the most powerful tests in health care. It is one of the few that can lead to a diagnosis on its own. Bone-conduction testing gives the audiogram its diagnostic power. Bone-conduction audiometry requires calibration methods that are expensive, cumbersome, and often misunderstood. Because the stimulus is a mechanical vibration, the quantities that are measured (force and acceleration) differ from the sound pressure measurements used to calibrate air-conducted tonal and speech stimuli. This article reviews the history of bone-conduction testing from its Renaissance beginnings, standard and alternative bone-conduction calibration methods, problems in current calibration standards, and the measurement of the performance of wearable and surgical bone-conduction hearing devices.
-
References
- 1 Feldmann H. A History of Audiology: A Comprehensive Report and Bibliography from the Earliest Beginnings to the Present. Chicago, IL: Beltone Institute for Hearing Research; 1970
- 2 Fowler EP. Fundamentals of bone conduction. Arch Otolaryngol 1925; 2: 529-542
- 3 Ogilvie MB, Harvey JD. The Biographical Dictionary of Women in Science: Pioneering Lives from Ancient Times to the mid-20th Century. New York, NY: Routledge; 2000
- 4 Dean SW, Bunch CC. The use of the pitch range audiometer in otology. Laryngoscope 1919; 29: 453-462
- 5 Bunch CC. Clinical Audiometry. St. Louis, MO: The CV Mosby Company; 1943
- 6 Jones IH, Knudsen VO. Functional tests of hearing. Laryngoscope 1924; 39: 1-16
- 7 Knudsen VO, Jones IH. Bone conduction. Arch Otolaryngol 1931; 13 (4) 489-505
- 8 Jones IH, Knudsen VO. Audiometry and the prescribing of hearing aids. Laryngoscope 1936; 46 (7) 523-536
- 9 Naunton RF. The measurement of hearing by bone conduction. In: Jerger J, , ed. Modern Development in Audiology. New York, NY: Academic Press; 1963: 1-29
- 10 Cook RK. Physical standards for bone conduction measurements. Paper presented at: the annual convention of the American Speech and Hearing Association; November 11–14 1959; Cleveland, OH
- 11 Hedgecock LD. Clinical calibration of bone-conduction measurements. Arch Otolaryngol 1961; 73 (2) 186-195
- 12 Popelka GR, Derebery J, Blevins NH , et al. Preliminary evaluation of a novel bone-conduction device for single-sided deafness. Otol Neurotol 2010; 31 (3) 492-497
- 13 Hawley MS. Bell Lab Rec 1939; 18 (3) 73-75
- 14 Carlisle RW, Pearson HA, Werner PH. Improved bone conduction receiver for audiometry. J Acoust Soc Am 1947; 19: 632-638
- 15 Sanders JW, Olsen WO. An evaluation of a new artificial mastoid as an instrument for the calibration of audiometer bone-conduction systems. J Speech Hear Disord 1964; 29: 247-263
- 16 Whittle LS. Problems of calibration in bone conduction. Br J Audiol 1970; 4 (2) 35-41
- 17 ANSI S3.13-1987. Mechanical Coupler for Measurement of Bone Vibrators. New York, NY: American National Standards Institute; 1987
- 18 IEC 60318-6. Electroacoustics—Simulators of Human Head and Ear—Part 6: Mechanical Coupler for Measurement of Bone Vibrators. Geneva, Switzerland: International Electrotechnical Commission; 2007
- 19 Toll LE, Emanuel DC, Letowski T. Effect of static force on bone conduction hearing thresholds and comfort. Int J Audiol 2011; 50 (9) 632-635
- 20 Margolis RH, Glasberg BR, Creeke S, Moore BCJ. AMTAS: automated method for testing auditory sensitivity: validation studies. Int J Audiol 2010; 49 (3) 185-194
- 21 Margolis RH, Moore BCJ. AMTAS(®): automated method for testing auditory sensitivity: III. sensorineural hearing loss and air-bone gaps. Int J Audiol 2011; 50 (7) 440-447
- 22 Margolis RH, Frisina R, Walton JP. AMTAS(®): automated method for testing auditory sensitivity: II. air conduction audiograms in children and adults. Int J Audiol 2011; 50 (7) 434-439
- 23 Margolis RH, Eikelboom RH, Johnson C, Ginter SM, Swanepoel W, Moore BCJ. False air-bone gaps at 4. kHz in listeners with normal hearing and sensorineural hearing loss. Int J Audiol 2013; 52 (8) 526-532
- 24 ANSI S3.6-2010. Specification for Audiometers. New York, NY: American National Standards Institute; 2010
- 25 IEC 60318-1-2009. Electroacoustics—Simulators of Human Head and Ear—Part 1: Ear Simulator for the Measurement of Supra-aural and Circumaural Earphones. Geneva, Switzerland: International Electrotechnical Commission; 2009
- 26 ANSI S3.25-1979. For an Occluded Ear Simulator. New York, NY: American National Standards Institute; 1979
- 27 Margolis RH, Stiepan SM. Acoustic method for calibration of audiometric bone vibrators. J Acoust Soc Am 2012; 131 (2) 1221-1225
- 28 Council on Physical Therapy. JAMA 1937; 109 (22) 1812-1813
- 29 Council on Physical Therapy. JAMA 1939; 112 (8) 732-732
- 30 Council on Physical Medicine and Rehabilitation. JAMA 1951; 146: 255-257
- 31 ASA Z24.5. American National Standard Specification for Audiometers for General Diagnostic Purposes. New York, NY: American Standards Association; 1951
- 32 ANSI S3.13-1972. American National Standard for an Artificial Headbone for the Calibration of Audiometer Bone Vibrators. New York, NY: American National Standards Institute; 1972
- 33 ANSI S3.26-1981. Reference Equivalent Threshold Force Levels for Audiometric Bone Vibrators. New York, NY: American National Standards Institute: 1981
- 34 ANSI S3.6-1996. Specifications for Audiometers. New York, NY: American National Standards Institute;
- 35 ISO 389-3:1994. Acoustics—Reference Zero for the Calibration of Audiometric Equipment. Part 3: Reference Equivalent Threshold Force Levels for Pure Tones and Bone Vibrators. Geneva, Switzerland: International Organization for Standardization; 1994
- 36 Carhart R. Clinical application of bone conduction audiometry. Arch Otolaryngol 1950; 51 (6) 798-808
- 37 Roach RE, Carhart R. A clinical method for calibrating the bone-conduction audiometer. AMA Arch Otolaryngol 1956; 63 (3) 270-278
- 38 Whittle LS. A determination of the normal threshold of hearing by bone conduction. J Sound Vib 1965; 2 (3) 227-248
- 39 Lybarger SF. Interim bone-conduction thresholds for audiometry. J Acoust Soc Am 1966; 40 (5) 1189-1190
- 40 Wilber LA, Goodhill V. Real ear versus artificial mastoid methods of calibration of bone-conduction vibrators. J Speech Hear Res 1967; 10 (3) 405-416
- 41 Dirks DD, Malmquist CW, Bower DR. Toward the specification of normal bone-conduction threshold. J Acoust Soc Am 1968; 43 (6) 1237-1242
- 42 Dirks DD, Kamm C. Bone-vibrator measurements: physical characteristics and behavioral thresholds. J Speech Hear Res 1975; 18 (2) 242-260
- 43 Dirks DD, Lybarger SF, Olsen WO, Billings BL. Bone conduction calibration: current status. J Speech Hear Disord 1979; 44 (2) 143-155
- 44 Richter U, Brinkmann K. Threshold of hearing by bone conduction. A contribution to international standardization. Scand Audiol 1981; 10 (4) 235-237
- 45 Robinson DW, Shipton MS. A standard determination of paired air- and bone-conduction thresholds under different masking noise conditions. Audiology 1982; 21 (1) 61-82
- 46 Lightfoot GR. Air-borne radiation from bone conduction transducers. Br J Audiol 1979; 13 (2) 53-56
- 47 Bell I, Goodsell S, Thornton ARD. A brief communication on bone conduction artefacts. Br J Audiol 1980; 14 (3) 73-75
- 48 Frank T, Holmes A. Acoustic radiation from bone vibrators. Ear Hear 1981; 2 (2) 59-63
- 49 Shipton MS, John AJ, Robinson DW. Air-radiated sound from bone vibration transducers and its implications for bone conduction audiometry. Br J Audiol 1980; 14 (3) 86-99
- 50 Frank T, Crandell CC. Acoustic radiation produced by B-71, B-72, and KH 70 bone vibrators. Ear Hear 1986; 7 (5) 344-347
- 51 Lightfoot GR, Hughes JB. Bone conduction errors at high frequencies: implications for clinical and medico-legal practice. J Laryngol Otol 1993; 107 (4) 305-308
- 53 Ginter SM, Margolis RH. Acoustic method for calibration of audiometric bone vibrators. II. Harmonic distortion. J Acoust Soc Am 2013; 134 (1) EL33-EL37
- 54 ANSI S3.7-1995. Method for Coupler Calibration of Earphones. New York, NY: American National Standards Institute; 1995
- 55 IEC 60318-5 2006. Electroacoustics—Simulators of Human Head and Ear—Part 5: Coupler for the Measurement of Hearing Aids and Earphones Coupled to the Ear by Means of Ear Inserts. Geneva, Switzerland: International Electrotechnical Commission; 2006
- 56 Nolan M, Lyon DJ. Transcranial attenuation in bone conduction audiometry. J Laryngol Otol 1981; 95 (6) 597-608