Ultraschall Med 2017; 38(01): 60-64
DOI: 10.1055/s-0035-1553252
Original Article
© Georg Thieme Verlag KG Stuttgart · New York

Optimized Sonographic Weight Estimation of Fetuses over 3500 g Using Biometry-Guided Formula Selection

Eine biometriebasierte Selektion der Formel zur fetalen Gewichtsschätzung erhöht die die Genauigkeit des Schätzgewichts bei Feten über 3500 g
Dalia Balsyte
1   Clinic of Obstetrics, University Hospital Zurich, Switzerland
,
Leonhard Schäffer
2   Clinic of Obstetrics, Baden Cantonal Hospital, Baden, Switzerland
,
Roland Zimmermann
1   Clinic of Obstetrics, University Hospital Zurich, Switzerland
,
Jouzas Kurmanavicius
1   Clinic of Obstetrics, University Hospital Zurich, Switzerland
,
Tilo Burkhardt
1   Clinic of Obstetrics, University Hospital Zurich, Switzerland
› Institutsangaben
Weitere Informationen

Publikationsverlauf

21. Februar 2014

23. April 2015

Publikationsdatum:
30. September 2015 (online)

Preview

Abstract

Purpose The Hadlock et al. formula tends to underestimate fetal weight, in particular > 3500 g. At the high end of the range, the Merz et al. formula is more accurate, but becomes less so in smaller fetuses. This study was designed to improve fetal weight estimation in fetuses > 3500 g by identifying the fetal biometric parameter providing the most reliable guidance to optimal formula selection.

Materials and Methods Regression analysis of 12 032 pregnancies showed that multiplication of abdominal circumference by femur length (AC × FL) gave the best choice of appropriate formula: Hadlock for AC × FL < 24 600, Merz for those ≥ 24 600. We then tested this rule, (‘Zurich method’), prospectively in 4073 pregnancies, comparing it with the Hadlock, Merz and the Kehl formulas. Birth weights were merged into 7 categories (< 1500 to ≥ 4000 g, interval of 500 g). The percentage error (PE) and absolute percentage error (APE) were calculated.

Results The PE using the Zurich method was lower in both > 3500 g groups than with the Hadlock formula alone (3500 – 3999 g: 0.9 % vs. – 5.3 %, > 4000 g: – 3.2 % vs. – 8.6 %), similar to that with the Merz formula alone, and lower than with the Kehl formulas (3500 – 3999 g: – 9.0 % vs. – 3.2 %, > 4000g: – 5.1 % vs. 0.9 %). The Zurich method and Hadlock formula also shared the lowest PE in the < 1500 g group: 0.2 % vs. 6.8 % (Kehl) vs. 9.6 % (Merz). In terms of APE the Zurich method performed almost as well as the Merz formula in the > 4000 g group, while sharing the lowest value with the Hadlock formula in the < 1500 g group (8.2 % vs. 10.5 % [Kehl], 23.6 % [Merz]).

Conclusion The Zurich method uses a pivotal value of the biometry parameter AC × FL to switch between formulas and corrects for the errors of the Hadlock formula in fetuses ≥ 3500 g and those of the Merz formula in fetuses < 3500 g.

Zusammenfassung

Ziel Die Hadlock-Formel unterschätzt Feten > 3500 g. Die Merz-Formel hat geringe Schätzfehler bei Feten > 3500 g aber einen größeren Fehler bei kleinen Feten. Gesucht wurde eine Methode zur Auswahl der geeignetsten Gewichtsschätzformel auf der Basis von Biometrieparametern.

Material und Methoden Eine Regressionsanalyse an 12 041 Schwangerschaften ergab das Produkt aus Abdomenumfang und Femurlänge (AC × FL) als besten Parameter für die Wahl der Hadlock- oder Merz-Formel (Hadlock AC × FL < 24 600, Merz AC × FL ≥ 24 600). An 4073 Schwangerschaften wurde diese Methode (Zürcher-Methode) prospektiv getestet und mit der alleinigen Verwendung der Hadlock-, Merz- und Kehl-Formeln verglichen. Berechnet wurden der prozentuale Fehler (PE) und der absolute prozentuale Fehler (APE) für 7 Gewichtsgruppen (< 1500 bis ≥ 4000 g, 500 g Intervalle).

Ergebnisse Der PE der Zürcher-Methode war am geringsten in den Gruppen > 3500 g verglichen mit der Hadlock-Formel alleine (3500 – 3999 g: 0,9 % vs. – 5,3 %, > 4000 g: – 3,2 % vs. – 8,6 %), > 4000 g vergleichbar mit der Merz-Formel und geringer als mit der Kehl-Formel (3500 – 3999 g: – 9,0 % vs. – 3,2 %, > 4000 g: – 5,1 % vs. 0,9 %). Die Hadlock-Formel resp. Zürcher-Methode hat den geringsten PE in der Gruppe < 1500 g: 0,2 % vs. 6,8 % (Kehl) vs. 9,6 % (Merz). Der APE der Zürcher-Methode wie auch der Merz-Formel war am niedrigsten in der Gruppe > 4000 g und zusammen mit der Hadlock-Formel am niedrigsten in der Gruppe < 1500 g (8,2 % vs. 10,5 % [Kehl], 23,6 % [Merz]).

Schlussfolgerung Durch einen Wechsel der Formel, basierend auf dem Parameter AC × FL, kombiniert die Zürcher Methode die Vorteile der Hadlock-Formel und die der Merz-Formel.