Handchir Mikrochir Plast Chir 2001; 33(3): 211-214
DOI: 10.1055/s-2001-15128
Originalarbeit

Georg Thieme Verlag Stuttgart · New York

Auswirkung der Schaftlänge von Fingergelenkprothesen auf die Spannungsverteilung im Knochen

The Influence of Finger Joint Prosthesis Stem Length on the Distribution of Stress within BoneT. Günter 1,2 , K. Schmidt 3 , J. Schmitt 2 , R. Leppek 4 , M. Lengsfeld 2
  • 1 Abteilung für Endoprothetik des Lubinus-Clinicum Kiel (Leiter: Dr. P. Lubinus)
  • 2 Klinik für Orthopädie der Philipps-Universität Marburg (Direktor: Prof. Dr. P. Griss)
  • 3 Abteilung für Rheumaorthopädie am St.-Josef-Hospital der Ruhr-Universität Bochum (Leiter: Dr. K. Schmidt)
  • 4 Abteilung für Strahlendiagnostik der Philipps-Universität Marburg (Direktor: Prof. Dr. K. J. Klose)
Further Information

Publication History

Publication Date:
31 December 2001 (online)

Zusammenfassung

Um den Einfluss der Schaftlänge von Fingerprothesen auf die Spannungsverteilung im implantattragenden Knochen experimentell zu ermitteln, wurden Finite-Elemente-Berechnungen (FEM) von Fingerknochen vor und nach der Implantation von Fingergrundgelenkprothesen mit drei unterschiedlichen Längen der intramedullären Verankerungsstiele durchgeführt. Als Implantat wurde ein Prototyp einer zementfreien, teilgekoppelten Stielprothese mit vier Freiheitsgraden verwendet, der speziell für die Versorgung von rheumatisch destruierten Fingergrundgelenken konzipiert wurde.

Die Analyse der Spannung im Knochen im Bereich der Prothesenschäfte in den auf Spiral-CT-Datensätze basierenden FEM-Modellen zeigt bei Vergleich der so genannten von-Mises-Vergleichsspannung vor und nach Implantation die geringste Änderung bei Verwendung einer Schaftlänge, die bis zur Mitte der Diaphyse reicht. Im implantattragenden Knochen der Mittelhandmetaphyse errechneten wir für mittellange Schäfte eine mittlere Knochenspannungsänderung von nur 1,3 MPa (Megapascal = 106 Pa). Demgegenüber haben wir dort bei einer kurzen Prothese eine durchschnittliche Erhöhung um 18,9 MPa und bei der langen Prothese eine durchschnittliche Erniedrigung von 21,4 MPa beobachtet.

Summary

In order to investigate the influence of stem length in finger joint prostheses on stress in the surrounding bone area, finite element (FEM) calculations of finger bones before and after prosthetic replacement of metacarpophalangeal joints with cementless implants of different stem length were performed. CT scans of the metacarpal bone and proximal phalanx before and after implantation of a prototype of a noncemented semiconstrained implant for the MP joint, which has been developed to replace metacarpophalangeal joints destroyed by rheumatoid arthritis, were analysed.

The FEM calculations showed comparatively decreased differences of the von-Mises stress after implantation of intramedullary stems reaching the middle of the diaphysis. At the metaphysis of the metacarpal head we found an increase of the von-Mises stress of 1.3 MPa (Mega Pascal = 106 Pa), an increase of 18.9 MPa around the shortest prosthesis and a decrease of 21.4 MPa around the prosthesis with the longest stem.

Literatur

  • 1 An K N, Chao E Y, Cooney W P, Linscheid R L. Forces in the normal and abnormal hand.  J Orthop Res. 1985;  3 202-211
  • 2 Beckenbaugh R D. The development of an implant for the metacarpophalangeal joint of the fingers.  Acta Orthop Scand. 1999;  70 107-108
  • 3 Bontemps E, Tillmann K. Langzeitergebnisse totaler Fingergelenkendoprothesen Modell „St Georg“.  Handchir Mikrochir Plast Chir. 1988;  20 321-323
  • 4 Ciarelli M J, Goldstein S A, Kuhn J L, Cody D D, Brown M B. Evaluation of orthogonal mechanical properties and density of human trabecular bone from the major metaphyseal regions with materials testing and computed tomography.  J Orthop Res. 1991;  9 674-682
  • 5 Hagert C-G, Brånemark P-I, Albrektsson T, Strid K-G, Irstam L. Metacarpophalangeal joint replacement with osseointegrated endoprostheses.  Scand J Reconstr Surg. 1986;  20 207-218
  • 6 Józsa L, Renner A, Frenyó S. Silicone-induced synovial and osseal granuloma following metacarpophalangeal and carpal arthroplasty.  Zentralbl Pathol. 1993;  139 313-319
  • 7 Keyak J H, Meagher J M, Skinner H B, Mote jr C D. Automated three-dimensional finite element modelling of bone: A new method.  J Biomed Eng. 1990;  12 389-397
  • 8 Lundborg G, Brånemark P-I, Carlsson I. Metacarpophalangeal joint arthroplasty based on the osseointegration concept.  J Hand Surg [Br]. 1993;  18 693-703
  • 9 Peimer C A, Taleisnik J, Sherwin F S. Pathologic fractures: A complication of microparticulate synovitis.  J Hand Surg [Am]. 1991;  16 835-843
  • 10 Schmidt K, Miehlke R K, Witt K. Stand der Endoprothetik des Fingergrundgelenkes beim Rheumatiker. Langzeitergebnisse des Fingergrundgelenkersatzes mit dem Silastik®-Interponat nach Swanson.  Handchir Mikrochir Plast Chir. 1996;  28 254-264
  • 11 Schmitt J. Automatische Generierung von Finite-Elemente-Modellen des menschlichen Femurs aus Schnittbilddaten mit Implementierung von Prothesenschäften zur In-vitro und In-vivo-Spannungsanalyse. Universität Marburg: Medizinische Dissertation. 1997
  • 12 Wanivenhaus A, Lintner F, Wurnig C, Missaghi-Schinzl M. Long-term reaction of the osseous bed around silicone implants.  Arch Orthop Trauma Surg. 1991;  110 146-150
  • 13 Zannoni C, Viceconti M, Pierotti L, Cappello A. Analysis of titanium induced CT artifacts in the development of biomechanical finite element models.  Med Eng Phys. 1998;  20 653-659

Tim Günter

Lubinus-Clinicum Abteilung für Endoprothetik

Steenbeker Weg 25

24106 Kiel

Email: guenter@orthopedics.de

    >