Download PDF
Vet Comp Orthop Traumatol 2022; 35(06): 381-389
DOI: 10.1055/s-0042-1750433
Original Research

Accuracy of Lumbosacral Pedicle Screw Placement in Dogs: A Novel 3D Printed Patient-Specific Drill Guide versus Freehand Technique in Novice and Expert Surgeons

Jos J. Bongers 
1   School of Veterinary Medicine, University of Glasgow, Glasgow, United Kingdom
,
Nathan Wilkinson
2   Axia 3D Design (currently Nexus Engineering & Design Ltd), Napier, New Zealand
,
Manabu Kurihara
3   Cummings School of Veterinary Medicine at Tufts University, Crafton, United States
,
Janis P. Bridges
4   Massey University School of Veterinary Science, Palmerston North, New Zealand
,
Wendy Baltzer
5   University of Sydney, School of Veterinary Science, Sydney, New South Wales, Australia
,
Andrew J. Worth 
4   Massey University School of Veterinary Science, Palmerston North, New Zealand
› Author Affiliations Funding Funding for this project was provided by the Massey University Working Dog Centre, Palmerston North, New Zealand.
› Further Information
    Permissions and Reprints

Abstract

Objective The aim of this study was to compare the accuracy of pedicle screw placement at the canine lumbosacral junction using a novel unilateral three-dimensional printed patient-specific guide (3D-PSG) versus a freehand drilling technique. Additionally, accuracy of screw placement between a novice and an experienced surgeon was determined.

Study Design Preoperative computed tomography images from 20 lumbosacral cadaveric specimens were used to design a novel unilateral 3D-PSG for the L7 and sacral vertebrae which was printed in acryl-nitrile butadiene styrene plastic. A novice and an expert surgeon each placed 3.5mm cortical screws in 10 cadavers; on the left using the unilateral 3D-PSG and by the freehand (anatomic landmark) technique on the right.

Results Sixty screws were placed using the unilateral 3D-PSG and 60 using the freehand technique. There was no statistical difference in accuracy for the comparison between methods performed by the expert (p = 0.679) and novice (p = 0.761) surgeon, nor between an expert and novice surgeon overall (p = 0.923). Unexpectedly, the use of a unilateral 3D-PSG increased variability for the expert surgeon in our study (p = 0.0314).

Conclusion Using a novel unilateral 3D-PSG did not improve the accuracy of screw placement for lumbosacral stabilization by a novice surgeon compared with an expert surgeon in lumbar spine surgery. This may reflect a suboptimal PSG design.

Keywords

accuracy - 3D printed - lumbosacral - screw - patient-specific


Publication History

Received: 25 January 2021

Accepted: 04 May 2022

Article published online:
10 July 2022

© 2022. Thieme. All rights reserved.

Georg Thieme Verlag KG
Rüdigerstraße 14, 70469 Stuttgart, Germany

 

  • References

  • 1 Méheust P, Mallet C, Marouze C. A new surgical technique for lumbosacral stabilization: arthrodesis using the pedicle screw fixation. Anatomical aspects. Prat Médicale &amp . Chir l'Animal Cie 2000; 35 (03) 193-199
    PubMedGoogle Scholar
  • 2 Meij BP, Suwankong N, Van der Veen AJ, Hazewinkel HAW. Biomechanical flexion-extension forces in normal canine lumbosacral cadaver specimens before and after dorsal laminectomy-discectomy and pedicle screw-rod fixation. Vet Surg 2007; 36 (08) 742-751
    CrossrefPubMedGoogle Scholar
  • 3 Smolders LA, Voorhout G, van de Ven R. et al. Pedicle screw-rod fixation of the canine lumbosacral junction. Vet Surg 2012; 41 (06) 720-732
    CrossrefPubMedGoogle Scholar
  • 4 Chen H, Wu D, Yang H, Guo K. Clinical use of 3D printing guide plate in posterior lumbar pedicle screw fixation. Med Sci Monit 2015; 21: 3948-3954
    CrossrefPubMedGoogle Scholar
  • 5 Lu S, Xu YQ, Chen GP. et al. Efficacy and accuracy of a novel rapid prototyping drill template for cervical pedicle screw placement. Comput Aided Surg 2011; 16 (05) 240-248
    CrossrefPubMedGoogle Scholar
  • 6 Kraus M, Weiskopf J, Dreyhaupt J, Krischak G, Gebhard F. Computer-aided surgery does not increase the accuracy of dorsal pedicle screw placement in the thoracic and lumbar spine: a retrospective analysis of 2,003 pedicle screws in a level I trauma center. Global Spine J 2015; 5 (02) 93-101
    CrossrefPubMedGoogle Scholar
  • 7 Pijpker PAJ, Kraeima J, Witjes MJH. et al. Accuracy assessment of pedicle and lateral mass screw insertion assisted by customized 3D-printed drill guides: a human Cadaver study. Oper Neurosurg (Hagerstown) 2019; 16 (01) 94-102
    CrossrefPubMedGoogle Scholar
  • 8 Aoude AA, Fortin M, Figueiredo R, Jarzem P, Ouellet J, Weber MH. Methods to determine pedicle screw placement accuracy in spine surgery: a systematic review. Eur Spine J 2015; 24 (05) 990-1004
    CrossrefPubMedGoogle Scholar
  • 9 Yu C, Ou Y, Xie C, Zhang Y, Wei J, Mu X. Pedicle screw placement in spinal neurosurgery using a 3D-printed drill guide template: a systematic review and meta-analysis. J Orthop Surg Res 2020; 15 (01) 1
    CrossrefPubMedGoogle Scholar
  • 10 Beer P, Park BH, Steffen F, Smolders DLA, Pozzi A, Knell SC. Influence of a customized three-dimensionally printed drill guide on the accuracy of pedicle screw placement in lumbosacral vertebrae: an ex vivo study. Vet Surg 2020; 49 (05) 977-988
    CrossrefPubMedGoogle Scholar
  • 11 Hamilton-Bennett SE, Oxley B, Behr S. Accuracy of a patient-specific 3D printed drill guide for placement of cervical transpedicular screws. Vet Surg 2018; 47 (02) 236-242
    CrossrefPubMedGoogle Scholar
  • 12 Guevar J, Bleedorn J, Cullum T, Hetzel S, Zlotnick J, Mariani CL. Accuracy and safety of three-dimensionally printed animal-specific drill guides for thoracolumbar vertebral column instrumentation in dogs: bilateral and unilateral designs. Vet Surg 2021; 50 (02) 336-344
    CrossrefPubMedGoogle Scholar
  • 13 Pan Y, Lü GH, Kuang L, Wang B. Accuracy of thoracic pedicle screw placement in adolescent patients with severe spinal deformities: a retrospective study comparing drill guide template with free-hand technique. Eur Spine J 2018; 27 (02) 319-326
    CrossrefPubMedGoogle Scholar
  • 14 Garg B, Gupta M, Singh M, Kalyanasundaram D. Outcome and safety analysis of 3D-printed patient-specific pedicle screw jigs for complex spinal deformities: a comparative study. Spine J 2019; 19 (01) 56-64
    CrossrefPubMedGoogle Scholar
  • 15 Pu X, Yin M, Ma J. et al. Design and application of a novel patient-specific three-dimensional printed drill navigational guiding in atlantoaxial pedicle screw placement. World Neurosurg 2018; 114: e1-e10
    CrossrefPubMedGoogle Scholar
  • 16 Deyo RA, Phillips WR. Low back pain. A primary care challenge. Spine 1996; 21 (24) 2826-2832
    CrossrefPubMedGoogle Scholar
  • 17 Worth AJ. Custom titanium implants for stabilisation of the canine lumbosacral joint. Abstract. Veterinary Orthopedic Society, Big Sky, Montana, Feb 28- Mar 3, 2016. Vet Comp Orthop Traumatol 2016; 29 (03) A28
    PubMedGoogle Scholar
  • 18 Watine S, Cabassu JP, Catheland S, Brochier L, Ivanoff S. Computed tomography study of implantation corridors in canine vertebrae. J Small Anim Pract 2006; 47 (11) 651-657
    CrossrefPubMedGoogle Scholar
  • 19 Wheeler S, Sharp N. . Small Animal Spinal Disorders, Diagnosis and Surgery.; 1994. Accessed May 22, 2022 at: https://www.cabdirect.org/cabdirect/abstract/19942214873
    PubMed
  • 20 Rho YH, Cho CW, Ryu CH, Lee JH, Jeong SM, Lee HB. Comparison between novice and experienced surgeons performing corrective osteotomy with patient-specific guides in dogs based on resulting position accuracy. Vet Sci 2021; 8 (03) 1-9
    CrossrefPubMedGoogle Scholar
  • 21 Mariani CL, Zlotnick JA, Harrysson O. et al. Accuracy of three-dimensionally printed animal-specific drill guides for implant placement in canine thoracic vertebrae: a cadaveric study. Vet Surg 2021; 50 (02) 294-302
    CrossrefPubMedGoogle Scholar
  • 22 Worth AJ. Custom titanium implants for stabilisation of the canine lumbosacral joint. Abstract. Veterinary Orthopedic Society, Big Sky, Montana, Feb 28- Mar 3, 2016. Vet Comp Orthop Traumatol 2016; 29 (03) A28
    PubMedGoogle Scholar
  • 23 Kaneyama S, Sugawara T, Sumi M. Safe and accurate midcervical pedicle screw insertion procedure with the patient-specific screw guide template system. Spine 2015; 40 (06) E341-E348
    CrossrefPubMedGoogle Scholar
  • 24 Yu CC, Yuh RT, Bajwa NS, Toy JO, Ahn UM, Ahn NU. Pedicle morphometry of lumbar vertebrae: male, taller, and heavier specimens have bigger pedicles. Spine 2015; 40 (21) 1639-1646
    CrossrefPubMedGoogle Scholar
  • 25 Mohanty SP, Pai Kanhangad M, Bhat SP. et al Morphometry of the lower thoracic and lumbar pedicles and its relevance in pedicle fixation. Musculoskelet Surg 2018; 102: 299-305
    CrossrefPubMedGoogle Scholar
  • 26 Cartiaux O, Jenny JY, Joskowicz L. Accuracy of computer-aided techniques in orthopaedic surgery: how can it be defined, measured experimentally, and analyzed from a clinical perspective?. J Bone Joint Surg Am 2017; 99 (08) e39
    CrossrefPubMedGoogle Scholar
  • 27 Toni C, Oxley B, Clarke S, Behr S. Accuracy of placement of pedicle screws in the lumbosacral region of dogs using 3D-printed patient-specific drill guides. Vet Comp Orthop Traumatol 2021; 34 (01) 53-58
    Article in Thieme ConnectPubMedGoogle Scholar
  • 28 Lien SB, Liou NH, Wu S-S. Analysis of anatomic morphometry of the pedicles and the safe zone for through-pedicle procedures in the thoracic and lumbar spine. Eur Spine J 2007; 16: 1215-1222
    CrossrefPubMedGoogle Scholar
  • 29 Toni C, Oxley B, Behr S. Atlanto-axial ventral stabilisation using 3D-printed patient-specific drill guides for placement of bicortical screws in dogs. J Small Anim Pract 2020; 61 (10) 609-616
    CrossrefPubMedGoogle Scholar
  • 30 Elford JH, Oxley B, Behr S. Accuracy of placement of pedicle screws in the thoracolumbar spine of dogs with spinal deformities with three-dimensionally printed patient-specific drill guides. Vet Surg 2020; 49 (02) 347-353
    CrossrefPubMedGoogle Scholar
  • 31 Fujioka T, Nakata K, Nakano Y. et al. Accuracy and efficacy of a patient-specific drill guide template system for lumbosacral junction fixation in medium and small dogs: cadaveric study and clinical cases. Front Vet Sci 2020; 6: 494
    CrossrefPubMedGoogle Scholar
  • 32 Dorweiler B, Baqué PE, Chaban R, Ghazy A, Salem O. Quality control in 3D printing: accuracy analysis of 3D-printed models of patient-specific anatomy. Materials (Basel) 2021; 14 (04) 1-13
    CrossrefPubMedGoogle Scholar
  • 33 Wen Z, Lu T, He X. et al. Accuracy of cervical pedicle screw placement with four different designs of rapid prototyping navigation templates: a human cadaveric study. Comput Assist Surg (Abingdon) 2021; 26 (01) 49-57
    CrossrefPubMedGoogle Scholar
  • 34 Spirig JM, Golshani S, Farshad-Amacker NA, Farshad M. Patient-specific template-guided versus standard freehand lumbar pedicle screw implantation: a randomized controlled trial. J Neurosurg Spine 2021; ; (May): 1-7
    CrossrefPubMedGoogle Scholar
  • 35 Wang VY, Chin CT, Lu DC. et al. Free-hand thoracic pedicle screws placed by neurosurgery residents: a CT analysis. Eur Spine J 2010; 19: 821-827
    CrossrefPubMedGoogle Scholar