ZWR - Das Deutsche Zahnärzteblatt, Table of Contents ZWR - Das Deutsche Zahnärzteblatt 2017; 126(01/02): 8-13DOI: 10.1055/s-0042-102777 Wissenschaft – Kieferorthopädie Georg Thieme Verlag KG Stuttgart · New YorkIst die Temperaturentwicklung beim Debonding bei allen rotierenden zahnärztlichen Instrumenten gleich?Is the Temperature Development During Debonding Identical for all Rotating Dental Instruments? R. Biedermann 1 Innsbruck , K. Winter 1 Innsbruck , A. G. Crismani 1 Innsbruck › Author AffiliationsRecommend Article Abstract Buy Article Als kritischer Punkt des Debondings kann die Temperaturentwicklung der Pulpa gesehen werden. Die intrapulpäre Temperatur darf einen gewissen Schwellenwert nicht überschreiten, um keine bleibenden Schäden in Form einer iatrogenen Pulpitis herbeizuführen. In dieser In-vitro-Studie wurden im Hinblick auf Temperaturveränderungen im Pulpenkavum verschiedene Finiermethoden im Rahmen von Adhäsiventfernung untersucht. Schlüsselwörter SchlüsselwörterDebonding - Finierer - iatrogene Pulpitis - Adhäsiventfernung Key words Key wordsdental debonding - dental finishing - iatrogenic pulpitis - adhesive removal Full Text References Literatur 1 Zach L, Cohen G. Pulp response to externally applied heat. Oral Surg Oral Med Oral Pathol 1965; 19: 515-530 2 Hannig M, Bott B. In-vitro pulp chamber temperature rise during composite resin polymerization with various light-curing sources. Dent Mater 1999; 15: 275-281 3 Chiodera G, Gastaldi G, Millar BJ. Temperature change in pulp cavity in vitro during the polymerization of provisional resins. Dent Mater 2009; 25: 321-325 4 Daronch M, Rueggeberg FA, Hall G. et al. Effect of composite temperature on in vitro intrapulpal temperature rise. Dent Mater 2007; 23: 1283-1288 5 Kodonas K, Gogos C, Tziafa C. Effect of simulated pulpal microcirculation on intrachamber temperature changes following application of various curing units on tooth surface. J Dent 2009; 37: 485-490 6 Martins GR, Cavalcanti BN, Rode SM. Increases in intrapulpal temperature during polymerization of composite resin. J Prosthet Dent 2006; 96: 328-331 7 Sulieman M, Addy M, Rees JS. Surface and intra-pulpal temperature rises during tooth bleaching: an in vitro study. Br Dent J 2005; 199: 37-40 8 Chan KH. Rapid and selective removal of composite from tooth surfaces with a 9.3μm Co2 laser using spectral feedback. Lasers Surg Med 2011; 43: 824-832 9 Ma T, Marangoni RD, Flint W. In vitro comparison of debonding force and intrapulpal temperature changes during ceramic orthodontic bracket removal using a carbon dioxide laser. Am J Orthod Dentofacial Orthop 1997; 111: 203-210 10 Obata A, Tsumura T, Niwa K. et al. Super pulse CO2 laser for bracket bonding and debonding. Eur J Orthod 1999; 21: 193-198 11 Rickabaugh JL, Marangoni RD, McCaffrey KK. Ceramic bracket debonding with the carbon dioxide laser. Am J Orthod Dentofacial Orthop 1996; 110: 388-393 12 Strobl K, Bahns TL, Willham L. et al. Laser-aided debonding of orthodontic ceramic brackets. Am J Orthod Dentofacial Orthop 1992; 101: 152-158 13 Bhaskar SN, Lilly GE. Intrapulpal Temperature during cavity preparation. J Dent Res 1965; 44: 644-647 14 Ercoli C, Rotella M, Funkenbusch PD. et al. In vitro comparison of the cutting efficiency and temperature production of ten different rotary cutting instruments. Part I: Turbine. J Prosthet Dent 2009; 101: 248-261 15 Ercoli C, Rotella M, Funkenbusch PD. et al. In vitro comparison of the cutting efficiency and temperature production of ten different rotary cutting instruments. Part II: electric handpiece and comparison with turbine. J Prosthet Dent 2009; 101: 319-331 16 Oztürk B, Usümez A, Oztürk AN. et al. In vitro assessment of temperature change in the pulp chamber during cavity preparation. J Prosthet Dent 2004; 91: 436-440 17 Schuchard A. A histologic assessment of low-torque, ultrahigh-speed cutting technique. J Prosthet Dent 1975; 34: 644-651 18 Watson TF, Flanagan D, Stone DG. High and low torque handpieces: cutting dynamics, enamel cracking and tooth temperature. Br Dent J 2000; 188: 680-686 19 Zachrisson BU. JCO/interviews Dr. Bjorn U. Zachrisson on excellence in finishing. Part 1. J Clin Orthod 1986; 20: 460-482 20 Gängler P. Das Verhalten der Blutzirkulation der Pulpa auf thermische Reize. Zahn Mund Kieferheilkd. Zentralbl 1976; 64: 480-486 21 Lisanti VF, Zander HA. Thermal injury to normal dog teeth: in vivo measurements of pulp temperature increases and their effect on the pulp tissue. J Dent Res 1952; 31: 548-558 22 Pohto M, Scheinin A. Microscopic observations on living dental pulp ii. the effect of thermal irritants on the circulation of the pulp in the lower rat incisor. Acta Odontol Scand 1958; 16: 315-327 23 Raab WH. Temperature related changes in pulpal microcirculation. Proc Finn Dent Soc 1992; 88: 469-479 24 Nyborg H, Brannström M. Pulp Reaction to heat. J Prosthet Dent 1968; 19: 605-612 25 Vukovich ME, Wood DP, Daley TD. Heat generated by grinding during removal of ceramic brackets. Am J Orthod Dentofacial Orthop 1991; 99: 505-512 26 Jonke E, Weiland F, Freudenthaler JW. et al. Heat generated by residual adhesive removal after debonding of brackets. World. J Orthod 2006; 7: 357-360 27 Baysal A, Uysal T, Usumez S. Temperature rise in the pulp chamber during different stripping procedures. Angle Orthod 2007; 77: 478-482 28 Malkoç S, Uysal T, Usümez S. et al. In-vitro assessment of termperature rise in the pulp during orthodontic bonding. Am J Orthod Dentofacial Orthop 2010; 137: 379-383 29 Mizrahi E, Cleaton-Jones P, Landy C. Tooth surface and pulp chamber temperatures developed during electrothermal bonding. Am J Orthod Dentofacial Orthop 1996; 109: 506-514 30 Crooks M, Hood J, Harkness M. Thermal debonding of ceramic brackets: an in vitro study. Am J Orthod Dentofacial Orthop 1997; 111: 163-172 31 Jost-Brinkmann PG, Radlanski RJ, Artun J. et al. Risk of pulp damage due to temperature increase during thermodebonding of ceramic brackets. Eur J Orthod 1997; 19: 623-628 32 Jost-Brinkmann PG, Stein H, Miethke RR. et al. Histologic investigation of the human pulp after thermodebonding of metal and ceramic brackets. Am J Orthod Dentofacial Orthop 1992; 102: 410-417 33 Lee-Knight CT, Wylie SG, Major PW. et al. Mechanical and electrothermal debonding: effect on ceramic veneers an dental pulp. Am J Orthod Dentofacial Orthop 1997; 112: 263-270 34 Sheridan JJ, Brawley G, Hastings J. Electrothermal debracketing. Part I. An in vitro study. Am J Orthod 1986; 89: 21-27 35 Takla PM, Shivapuja PK. Pulpal response in electrothermal debonding. Am J Orthod Dentofacial Orthop 1995; 108: 623-629 36 Bicakci AA, Kocoglu-Altan B, Celik-Ozenci C. et al. Histopathologic evaluation of pulpal tissue response to various adhesive cleanup techniques. Am J Orthod Dentofacial Orthop 2010; 138: 12.e1-12.e7 37 Mank S, Steineck M, Brauchli L. Influence of various polishing methods on pulp temperature: An in vitro study. J Orofac Orthop 2011; 72: 348-357 38 Uysal T, Eldeniz AU, Usumez S. et al. Thermal changes in the pulp chamber during different adhesive clean-up procedures. Angle Orthod 2005; 75: 220-225
