Synlett 2017; 28(02): 245-248
DOI: 10.1055/s-0036-1588330
letter
© Georg Thieme Verlag Stuttgart · New York

Cyclic 1-(Arylamino)carboxylates via Mild Diastereospecific Jocic-Type Reaction with 2,2,2-Trichloromethyl Carbinols and Anilines

Ricardo Lira*
,
Kevin E. Henegar
,
Neil Baldwin
,
Kevin Ogilvie
Further Information

Publication History

Received: 29 July 2016

Accepted after revision: 19 September 2016

Publication Date:
06 October 2016 (online)


Abstract

A mild, practical Jocic-type rearrangement for the synthesis of cyclic 1-(arylamino) carboxylates from readily available 2,2,2-trichloromethyl carbinols and anilines is described. The method demonstrates good scope, with a large variety of anilines providing direct access to several novel cyclic 1-(arylamino) carboxylates. The reaction is robust and has been shown to provide comparable results on kilogram scale. The reaction is diastereospecific, leading to the formation of a single diastereomer when utilizing stereodefined 2,2,2-trichloromethyl carbinol cores.

Supporting Information

 
  • References and Notes

  • 1 New Address: N. Baldwin, Ingredion Incorporation, 6400 S Archer Rd, Bedford Park, Illinois 60501, USA.
    • 2a Lee C.-W, Lira R, Dutra J, Ogilvie K, O’Neill BT, Brodney M, Helal C, Young J, Lachapelle E, Sakya S, Murra JC. J. Org. Chem. 2013; 78: 2661
    • 2b Henegar KE, Lira R, Kim H, Gonzalez-Hernandez J. Org. Process Res. Dev. 2013; 17: 985
    • 2c Romero DL, Olmsted RA, Poel TJ, Morge RA, Biles C, Keiser BJ, Kopta LA, Friis JM, Hosley JD, Stefanski KJ, Wishka DG, Evans DB, Morris J, Stehle RG, Sharma SK, Yagi Y, Voorman RL, Adams WJ, Tarpley WG, Thomas RC. J. Med. Chem. 1996; 39: 3769
    • 2d Bladh H, Dahmen J, Hansson T, Henriksson K, Lepisto M, Nilsson S. WO 2007046747, 2007
    • 2e Shinozuka T, Shimada K, Matsui S, Yamane T, Ama M, Fukuda T, Taki M, Takeda Y, Otsuka E, Yamato M, Mochizuki S.-i, Ohhata K, Naito S. Bioorg. Med. Chem. 2006; 14: 6789
    • 3a Strecker A. Justus Liebigs Ann. Chem. 1850; 75: 27
    • 3b Strecker A. Justus Liebigs Ann. Chem. 1854; 91: 349
    • 3c Wang J, Liu X, Feng X. Chem. Rev. 2011; 111: 6947
    • 4a Ruiz-Castillo P, Blackmond DG, Buchwald SL. J. Am. Chem. Soc. 2015; 137: 3085
    • 4b Park NH, Vinogradova EV, Surry DS, Buchwald SL. Angew. Chem. Int. Ed. 2015; 54: 8259
  • 5 Fisher DJ, Burnett GL, Velasco R, Read de Alaniz J. J. Am. Chem. Soc. 2015; 137: 11614

    • For other selected methods to access cyclic 1-(arylamino) carboxylates, see:
    • 6a Mailig M, Rucker RP, Lalic G. Chem. Commun. 2015; 51: 11048
    • 6b Berman AM, Johnson JS. J. Am. Chem. Soc. 2004; 126: 5680
    • 6c del Amo V, Dubbaka SR, Krasovskiy A, Knochel P. Angew. Chem. Int. Ed. 2006; 45: 7838
    • 6d Barker TJ, Jarvo ER. J. Am. Chem. Soc. 2009; 131: 15598

      For recent methods to access 2,2,2-trichloromethyl carbinols, see:
    • 7a Henegar KE, Lira R. J. Org. Chem. 2012; 77: 2999
    • 7b Gupta JK, Li Z, Snowden TS. J. Org. Chem. 2012; 77: 4854
    • 7c Jensen AB, Lindhardt AT. J. Org. Chem. 2014; 79: 1174
    • 7d Perryman MS, Harris ME, Foster JL, Joshi A, Clarkson GJ, Fox DJ. Chem. Commun. 2013; 49: 10022

      For previous selected examples of nucleophilic addition of amines to 2,2,2-trichloromethyl carbinols, see:
    • 8a Reeve W, Fine LW. J. Org. Chem. 1964; 29: 1148
    • 8b Dominguez C, Ezquerra J, Baker SR, Borrelly S, Prieto L, Espada M, Pedregal C. Tetrahedron Lett. 1998; 39: 9305
    • 8c Tanaka N, Tamai T, Mukaiyama H, Hirabayashi A, Muranaka H, Akahane S, Miyata H, Akahane M. J. Med. Chem. 2001; 44: 1436
    • 8d Butcher KJ, Hurst J. Tetrahedron Lett. 2009; 50: 2497
    • 8e Rohman MR, Myrboh B. Tetrahedron Lett. 2010; 51: 4772
  • 9 Intermediate 1 was successfully telescoped to the next steps in the sequence without the need of purification, see ref. 2b.
    • 10a Jocic Z. Zh. Russ. Fiz. Khim. Ova. 1897; 29: 97
    • 10b For recent synthetic applications involving gem-dichloroepoxides see: Snowden TS. ARKIVOC 2012; (ii): 24

      DBU and NaOH are the most widely used bases for similar transformations. For selected examples, see:
    • 11a Corey EJ, Link JO. J. Am. Chem. Soc. 1992; 114: 1906
    • 11b Scaffidi A, Skelton BW, Stick RV, White AH. Aust. J. Chem. 2006; 59: 426
    • 11c Dominguez C, Ezquerra J, Baker SR, Borrelly S, Prieto L, Espada M, Pedregal C. Tetrahedron Lett. 1998; 39: 9305
    • 11d Liu G, Romo D. Org. Lett. 2009; 11: 1143
    • 11e Tennyson RL, Cortez GS, Galicia HJ, Kreiman CR, Thompson CM, Romo D. Org. Lett. 2002; 4: 533
    • 11f Morimoto H, Wiedemann SH, Yamaguchi A, Harada S, Chen Z, Matsunaga S, Shibasaki M. Angew. Chem. Int. Ed. 2006; 45: 3146
  • 12 For all products, a single diastereomer was detected by HPLC. Stereochemistry was assigned by analogy to product 2.[2a,b]
  • 13 The lower yield is attributed to the competing formation of side product methoxy methyl ester of the type of 5 (Table 1). Side product was detected by mass (UPLC/MS) and was not isolated/characterized.
  • 14 General Experimental Procedure Preparation of (2S,4R)-1-Benzyl 4-Methyl 4-(3-Cyanophenylamino)-2-methylpiperidine-1,4-dicarboxylate (1d, Table 2, Entry 5) from (2S,4S)-4-Hydroxy-2-methyl-4-(trichloromethyl)piperidine-1-carboxylate (4) To a 20 mL vial equipped with a stir bar was charged with (2S,4S)-benzyl 4-hydroxy-2-methyl-4-(trichloromethyl)piperidine-1-carboxylate (4, 367 mg, 1 mmol), MeOH (2 mL), and 3-aminobenzonitrile (354 mg, 3 mmol). The resulting homogeneous reaction mixture was placed in a precooled plate at 0 °C and was stirred for 10 min. To the cooled reaction mixture was added Cs2CO3 (1.2 g, 3.5 mmol) in two portions over a period of about 10 min. The mixture was then warmed to 5 °C and stirred for 42 h. The reaction mixture was removed from the cold bath and was concentrated under reduced pressure in the rotavap to a gum. To the crude reaction mixture was then added MTBE (10 mL) and was transferred to an extraction funnel with MTBE (10 mL). The cloudy solution was washed with 0.5 N HCl (2 × 5 mL) and brine (5 mL). The organic layer was then dried over anhydrous Na2SO4, filtered, and concentrated under reduced pressure in the rotovap. The resulting crude material was purified twice by silica gel flash chromatography (isco CombiFlash purification system, 24 g HP silica column, 0–60% EtOAc–heptane) and provided compound 1d as a gum in 64% yield (268 mg). 1H NMR (400 MHz, CDCl3): δ = 7.31–7.37 (m, 5 H), 7.17–7.21 (m, 1 H), 7.01–7.03 (m, 1 H), 6.76–6.77 (m, 1 H), 6.73 (ddd, J = 8.0, 2.4, 0.8 Hz, 1 H), 5.14 (s, 2 H), 4.34–4.39 (m, 1 H), 4.21 (s, 1 H), 4.07 (ddd, J = 14.0, 5.6, 2.4 Hz, 1 H), 3.70 (s, 3 H), 3.27 (ddd, J = 14.4, 12.4, 4.0 Hz, 1 H), 2.60–2.64 (m, 1 H), 2.19 (ddd, J = 14.0, 5.6, 1.2 Hz, 1 H), 2.07 (dd, J = 13.6, 6.0 Hz, 1 H), 1.70 (ddd, J = 13.6, 12.4, 5.6 Hz, 1 H), 1.15 (d, J = 6.8 Hz, 3 H). 13C (100 MHz, CDCl3): δ = 174.5, 155.1, 145.4, 136.6, 129.9, 128.4, 128.0, 127.8, 122.3, 119.2, 119.0, 117.6, 112.9, 67.1, 57.5, 52.6, 45.6, 38.6, 36.1, 33.1, 17.7. ESI-HRMS: m/z calcd for C23H25N3O4 [M + H]+: 408.1918; found: 408.1918