Synlett 2014; 25(13): 1883-1887
DOI: 10.1055/s-0034-1378341
letter
© Georg Thieme Verlag Stuttgart · New York

Diamine Ligands for Asymmetric Catalysis: Facile Synthesis of C2-Symmetric Piperazines from Seebach’s Oxazolidinone

Zbigniew Kałuża*
Institute of Organic Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland   Fax: +48(22)6326681   Email: zbigniew.kaluza@icho.edu.pl
,
Rafał Ćwiek
Institute of Organic Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland   Fax: +48(22)6326681   Email: zbigniew.kaluza@icho.edu.pl
,
Mirosław Dygas
Institute of Organic Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland   Fax: +48(22)6326681   Email: zbigniew.kaluza@icho.edu.pl
,
Przemysław Kalicki
Institute of Organic Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland   Fax: +48(22)6326681   Email: zbigniew.kaluza@icho.edu.pl
› Author Affiliations
Further Information

Publication History

Received: 17 April 2014

Accepted after revision: 27 May 2014

Publication Date:
08 July 2014 (online)


Dedicated to Professor Mieczysław Mąkosza on the occasion of his 80th birthday

Abstract

C2-Symmetrical hemiaminal ethers and diamines with a piperazine core were synthesized starting from Seebach’s oxazolidinone. The new methodology is based on the dimerization of α-amino aldehydes to bicyclic bishemiaminal ethers, followed by reduction to the corresponding diamines. Several enantiopure piperazine derivatives bearing either methyl or bulky groups including isopropyl and aryl at the bridgehead carbon atoms were obtained applying this methodology. Initial screening of new ligands in the copper-catalyzed asymmetric acylation of meso-1,2-diols produced promising results (up to 92% ee).

Supporting Information

 
  • References and Notes


    • For comprehensive reviews, see:
    • 1a France S, Guerin DJ, Miller SJ, Lectka T. Chem. Rev. 2003; 103: 2985
    • 1b Kizirian JC. Chem. Rev. 2008; 108: 140
  • 2 Nakamura D, Kakiuchi K, Koga K, Shirai R. Org. Lett. 2006; 26: 6139
    • 3a Niwa S, Soa K. J. Chem. Soc., Perkin Trans. 1 1991; 2717
    • 3b Shono T, Kise N, Shirakawa E, Matsumoto H, Okazaki E. J. Org. Chem. 1991; 56: 3063
    • 3c Falorni M, Giacomelli G, Marchetti M, Culeddu N, Lardicci L. Tetrahedron: Asymmetry 1991; 2: 287
    • 3d Fuji K, Tanaka K, Miyamoto H. Tetrahedron: Asymmetry 1993; 4: 247
    • 3e Asami M, Watanabe H, Honda K, Inoue S. Tetrahedron: Asymmetry 1998; 9: 4165
    • 3f Hata T, Koide H, Taniguchi N, Uemura M. Org. Lett. 2000; 13: 1907
    • 3g Koide H, Hata T, Uemura M. J. Org. Chem. 2002; 67: 1929
    • 3h Koide H, Hata T, Yoshihara K, Kamikawa K, Uemura M. Tetrahedron 2004; 60: 4527
    • 4a Zadel G, Breitmaier E. Chem. Ber. 1994; 127: 1323
    • 4b Tang H, Zhao G, Zhou Z, Zhou Q, Tang C. Tetrahedron Lett. 2006; 47: 5717
    • 4c Tang H, Zhao G, Zhou Z, Gao P, He L, Tang C. Eur. J. Org. Chem. 2008; 126
    • 4d Selvakumar S, Sivasankaran D, Singh VK. Org. Biomol. Chem. 2009; 7: 3156
  • 5 Li JP, Biel JH. J. Heterocycl. Chem. 1968; 5: 703
  • 6 Kałuża Z, Bielawski K, Ćwiek R, Niedziejko P, Kaliski P. Tetrahedron: Asymmetry 2013; 24: 1435
  • 7 Seebach D, Boes M, Naef R, Schweizer WB. J. Am. Chem. Soc. 1983; 105: 5390
  • 8 General Procedure for the Preparation of Bishemiaminal Inner Ethers 10: To a solution of 9 (4.0 mmol) in MTBE (40 mL) at –78 °C, DIBAL-H solution (8 mmol, 8 mL of 1 M/hexane) was added dropwise during 20 min. After complete addition stirring was continued at this temperature for 3 h, then the reaction was quenched by the addition of Rochelle salt (10%/H2O solution 100 mL), slurry was diluted with MTBE (60 mL) and stirred at r.t. overnight. Phases were separated, and the aqueous layer was extracted with MTBE (3 × 60 mL), the combined organic layers were washed with brine (ca. 100 mL), dried, and concentrated in vacuo. The crude product was dissolved in MeCN (60 mL), Na2CO3 (18 mmol, 1.91 g in 60 mL H2O) was added and the mixture was stirred at r.t. for 24 h. The solution was concentrated to half of its initial volume (approx.), and then extracted with EtOAc (3 × 50 mL). The combined organic layers were washed with brine, dried and concentrated in vacuo. The crude product was purified either by ‘bulb-to-bulb’ distillation in a Kugelrohr oven or/and by crystal-lization. Yield is calculated for two steps from 9. Representative Products: Compound 10b: yield: 61%; amorphous solid; [α]D –80.8 (c = 1.0, CH2Cl2). IR (CH2Cl2): 2962, 2867 cm–1. 1H NMR (500 MHz, CDCl3): δ = 4.35 (s, 2 H), 3.22 (m, 2 H), 2.73 (m, 2 H), 1.83 (m, 2 H), 1.71 (m, 2 H), 1.54 (m, 4 H), 1.25 (s, 6 H). 13C NMR (125 MHz, CDCl3): δ = 101.0, 72.4, 55.6, 37.9, 26.0, 22.9. HRMS (EI): m/z [M+] calcd for C12H20N2O: 208.1576; found: 208.1573. Anal. Calcd for C12H20N2O: C, 69.19; H, 9.98; N, 13.45. Found: C, 68.99; H, 9.96; N, 13.41. Compound 10f: yield: 80%; oil; [α]D –3.5 (c = 1.0, CH2Cl2). IR (CH2Cl2): 2964, 2873 cm–1. 1H NMR (500 MHz, CDCl3): δ = 4.43 (s, 2 H), 2.98 (m, 2 H), 2.86 (m, 2 H), 2.42 (sept, J = 7.0 Hz, 2 H), 1.71–1.85 (m, 4 H), 1.55 (m, 2 H), 1.28 (m, 2 H), 0.88 (d, J = 7.0 Hz, 6 H), 0.80 (d, J = 7.0 Hz, 6 H). 13C NMR (125 MHz, CDCl3): δ = 103.7, 79.8, 59.7, 30.7, 29.7, 27.0, 18.4, 18.2. HRMS (EI): m/z [M+] calcd for C16H28N2O: 264.2202; found: 264.2201. General Procedure for the Preparation of Diamine 1: Diamines 1b, and 1c were prepared using our earlier reported procedure (ref 6). Alternatively, a modified procedure was used to prepare compounds 1e, 1f, and 1h: into a cold (0 °C) mixture of CH2Cl2 (10 mL), AcOH (2 mL) and NaBH(OAc)3 (4 mmol, 1.084 g) a solution of hemiaminal ether 10 (1 mmol) in CH2Cl2 (ca. 5 mL) was added dropwise. The reaction mixture was allowed to warm to r.t., and stirring was continued until the disappearance of the substrate (ca. 30 min, TLC control). The solution was diluted with CH2Cl2 (10 mL), washed with 10% solution of NaOHaq (3 × 10 mL) and brine (20 mL), dried and evaporated under reduced pressure. The residue was purified by ‘bulb-to-bulb’ distillation in a Kugelrohr oven or by crystallization. Representative Products: Diamine 1b: yield: 90%; oil; [α]D 31.7 (c = 1.3, CHCl3); {ref. 2 [α]D 31.5 (c = 1.23, CHCl3)}. Spectral data were in agreement with the reported data (ref 2). Diamine 1f: yield: 84%; oil; [α]D 50.7 (c = 1.0, CH2Cl2). IR (CH2Cl2): 2961, 2870, 1468 cm–1. 1H NMR (500 MHz, CDCl3): δ = 2.94 (m, 2 H), 2.73 (d, J = 12.1 Hz, 2 H), 2.69 (m, 2 H), 2.58 (d, J = 12.1 Hz, 2 H), 2.22 (sept, J = 7.0 Hz, 2 H), 1.70 (m, 4 H), 1.55 (m, 2 H), 1.25 (m, 2 H), 0.86 (d, J = 7.0 Hz, 6 H), 0.84 (d, J = 7.0 Hz, 6 H). 13C NMR (125 MHz, CDCl3): δ = 66.0, 55.6, 52.4, 31.4, 31.1, 23.0, 18.0, 16.4. HRMS (EI): m/z [M+] calcd for C16H30N2: 250.2409; found: 250.2402.
  • 9 The crystallographic data for compound 10c has been deposited with the Cambridge Crystallographic Data Center as supplementary publication number CCDC 997996. Copies of the data can be obtained, free of charge on application to 12 Union Road, Cambridge, CB2 1EZ, UK [fax: +44(1223)336033 or email: deposit@ccdc.cam.ac.uk].
  • 10 Gardiner JM, Bruce SE. Tetrahedron Lett. 1998; 39: 1029
  • 11 Mąkosza M, Sulikowski D, Maltsev O. Synlett 2008; 1711
    • 12a Oriyarna T, Imai K, Sano T, Hosoya T. Tetrahedron Lett. 1998; 39: 3529
    • 12b Mizuta S, Sadamori M, Fujimoto T, Yamamoto I. Angew. Chem. Int. Ed. 2003; 42: 3383
    • 12c Kundig EP, Lomberget T, Bragg R, Poulard C, Bernardinelli G. Chem. Commun. 2004; 1548
    • 12d Kundig EP, Garcia AE, Lomberget T, Garcia PP, Romanens P. Chem. Commun. 2008; 3519
    • 12e Schedel H, Kan K, Ueda Y, Mishiro K, Yoshida K, Furuta T, Kawabata T. Beilstein J. Org. Chem. 2012; 8: 1778
  • 13 Soloshonok VA, Roussel C, Kitagawa O, Sorochinsky AE. Chem. Soc. Rev. 2012; 41: 4180
  • 14 Raw SA, Wilfred CD, Taylor RJ. K. Chem. Commun. 2003; 2286 ; and references cited therein