Digitalisierung erweitert das Spektrum – Vollkeramik und CAD/CAM-Einsatz klinisch bewährt

In der Fachwelt ist unbestritten, dass die Digitalisierung von Praxisvorgängen und die Computerunterstützung von Behandlungsabläufen in der Zahnarztpraxis angekommen sind. Diese Entwicklung hat in der Zahnmedizin besonders die Datenerfassung von Gebisssituationen und die digital gesteuerte Fertigung von vollkeramischen Restaurationen vorangetrieben.

• Literatur

• 1 Beuer F, Schweiger J, Eichberger M et al. High-strength CAD/CAM-fabricated veneering material sintered to zirconia copings – a new fabrication mode for all-ceramic restorations. Dent Mater 2009; 25: 121-128
• 2 Caputi S, Varvara G. Dimensional accuracy of resultant casts made by a monophase, one-step and two-step, and a novel two-step putty/light-body impression technique: an in vitro study. J Prosthet Dent 2008; 99: 274-281
• 3 Ender A, Mehl A. Full arch scans. Conventional vs. digital impressions – an in-vitro study. Int J Comp Dent 2011; 14: 11-21
• 4 Fasbinder DJ, Dennison JB, Heys D et al. A clinical evaluation of chairside lithium disilicate CAD/CAM crowns: a two-year report. J Am Dent Assoc (Suppl. 02) 2010; 141: 10-14
• 5 Guess PC, Bonfante EA, Coelho PG et al. Monolithic CAD/CAM lithium disilicate versus veneered Y-TZP crowns: Comparison of failure modes and reliability after fatigue. Int J Prosthodont 2010; 23: 434-442
• 6 Holmes JR, Sulik WD, Holland GA et al. Marginal fit of castable ceramic crowns. J Prosthet Dent 1992; 67: 594-599
• 7 McLean JW, Fraunhofer JA. The estimation of cement film thickness by an in vivo technique. Br Dent J 1971; 131: 107-111
• 8 Mehl A, Ender A, Mörmann W et al. Accuracy testing of a new intraoral 3D camera. Int J Comp Dent 2009; 12: 11-28
• 9 Otto T, de Nisco S. Computer-aided direct ceramic restorations: a 10-year prospective clinical study of Cerec CAD/CAM inlays and onlays. Int J Prosthodont 2002; 15: 122-128
• 10 Otto T, Schneider D. Long-term clinical results of chairside Cerec CAD/CAM inlays and onlays – A case series. Int J Prosthodont 2008; 21: 53-59
• 11 Persson AS, Odén A, Andersson M et al. Digitization of simulated clinical dental impressions: virtual three-dimensional analysis of exactness. Dent Mater 2009; 25: 929-936
• 12 Reich S, Fischer S, Sobotta B et al. A preliminary study on the short-term efficacy of chairside computer-aided design/computer assisted manufacturing-generated posterior lithium disilicate crowns. Int J Prosthodont 2010; 23: 214-216
• 13 Sailer I, Fehér A, Filser F et al. Five-year clinical results of zirconia frameworks for posterior fixed partial dentures. Int J Prosthodont 2007; 20: 383-388
• 14 Syrek A, Reich G, Ranftl D et al. Clinical evaluation of all-ceramic crowns fabricated from digital impressions based on the principle of active wavefront sampling. J Dent 2010; 38: 553-559
• 15 Wittneben JG, Wright R, Weber HP et al. A systematic review of the clinical performance of CAD/CAM single tooth restorations. Int J Prosthodont 2009; 22: 466-471
• 16 Wiedhahn K, Kerschbaum T, Fasbinder DF. Clinical long-term results with 617 CEREC veneers: a nine year report. Int J Comput Dent 2005; 8: 233-246
• 17 Wöstmann B, Rehmann P, Balkenhol M. Accuracy of impressions obtained with dual-arch Tray. Int J Prosthodont 2009; 22: 158-160