McIndoe's vaginoplasty is a time-tested surgical method of neovagina creation.[1] This technique involves the creation of a vaginal cavity and using split-thickness
skin grafts (STSG) to line this cavity. Postoperatively, molds are used to maintain
the space of the cavity and to splint the grafts used for lining them.[2] Various materials have been described for making a vaginal stent, including tissue
expander, syringe,[3] cotton-stuffed condom mold, acrylic mold,[4] open-cell polyurethane foam,[5] Surgi-stuff, and even hollow vulcanite wood, used by McIndoe himself.[1] This article introduces an ingenious method of splinting using silicone mold and
a condom.
A thoroughly mixed 80 mL of liquid silicone (Mold Compound A) with 20 mL of liquid
silicone activator (Mold Compound B) was filled into a condom to assume the shape
of a vaginal mold and this mold was kept under the warm sunshine. Four hours later,
multiple needle pricks were made over the condom to permit air circulation through
the mold to hasten its setting into the desired shape ([Fig. 1]). After 48 hours, the condom was removed, and the mold was ready to use.
Fig. 1 The silicone material set in condom.
The initial reservation for using a vaginal splint is the resistance offered by the
large surface area of the blunt tip of the mold at the entrance of the neointroitus.
The mold prepared by us is user-friendly as it has a slender, soft, and pointed tip
([Fig. 2]). It facilitates quicker discharge as the patient starts independently using the
mold earlier. Nine patients who used this mold reported ease of insertion into the
neovagina and were independently using this mold within 7 days of surgery.
Fig. 2 The gently pointed silicone mold after retrieval from the condom.
The price of these commercially available products ranges from Rs. 2,000 to 6,000.
Due to decreased availability of these products in centers located away from major
cities, many surgeons prefer not doing this procedure and refer patients to city centers
that further increases the overall cost for the patient. To combat such problems,
we at our institute have devised an ingenious method of fabricating vaginal mold using
silicone and condom. The mold prepared by us is very cost-effective as its manufacturing
cost was Rs. 250, which is much more economical than other molds available for this
purpose.
