Keywords Pancreatobiliary (ERCP/PTCD) - Pancreatobiliary (ERCP/PTCD) - ERC topics - Quality
and logistical aspects - Training
Introduction
Endoscopic retrograde cholangiopancreatography (ERCP) is a technically challenging
procedure with significantly higher complication rates compared to standard endoscopic
procedures [1 ]
[2 ]. The outcome of ERCP is highly operator-dependent. Complications are more likely
to occur when an ERCP is performed by an inexperienced endoscopist [3 ]. Extensive training and procedural exposure is required to gain both technical and
cognitive competency in ERCP.
To date, novice ERCP-ists are trained in a clinical setting through supervised, hands-on
training in real patients. Advantages of the current training system include, among
others, the opportunity to gain immediate feedback by an experienced endoscopist.
However, this approach does have distinct disadvantages. This type of training is
an example of learning by “trial and error” and potentially increases the risk of
complications and patient discomfort. Additionally, it adds time and costs to each
procedure affecting total capacity and financial resources [4 ]. Trainees operate in a stressful environment, which may be less suited to process
feedback appropriately with the risk of being exposed to an overload of new information.
The optimal methodology to acquire competence in ERCP is an ongoing topic of debate.
Historically, it was assumed that competence is gained when a minimum number of ERCP
procedures is performed, with guidelines recommending threshold numbers, varying from
100 to 200 ERCP procedures, at which time a trainee should reach an 80% common bile
duct (CBD) cannulation success rate [5 ]. In a study by Verma et al.
[6 ], however, it was shown that a CBD cannulation rate of more than 80% was achieved
only after 400 supervised procedures. As a result of this study there has been a shift
to a more individualized approach, considering that individual trainees develop endoscopic
skills at a different pace [7 ]. The specific role of simulators in training ERCP have not been defined yet. The
outcome of simulator-based training on competence in gastroduodenoscopy and colonoscopy
have been extensively studied, demonstrating that novices gain significant experience
by training on simulators before they are exposed to real patients [8 ]
[9 ]. The improvement in performance seems most prominent in the early phase of the training.
For example, a study by Koch et al. evaluating simulator training in colonoscopy demonstrated that there was no further
improvement after 60 procedures [10 ]. Data on simulator training for training ERCP are scarce. Previously, our study
group validated a novel mechanical ERCP trainer, the Boškoski-Costamagna ERCP trainer
[11 ]
[12 ].
For this study, our primary aim was to assess whether a 2-day intensive hands-on training
including the use of the Boškoski-Costamagna ERCP Trainer in novice ERCP trainees
at the start of patient-based training resulted in an acceleration and improvement
of their learning curve. Our secondary aim was to establish to what extent this advantage
would last.
Materials and methods
Study design
This was a prospective cohort study conducted in seven tertiary referral centers in
five countries (Supplementary Table 1 ). A total of 13 endoscopy trainees participated in this study. Allocation of participants
was not strictly random, but was based on registration for a 2-day ERCP simulator
training course in Rome, Italy. Participation in the course was allowed for endoscopists
at the beginning of their ERCP careers. The simulator course participants (SG, simulator
group) were paired with a starting advanced endoscopy trainee at their respective
institution to form a control group (CG, control group). At study onset, all subjects
completed a questionnaire to determine their demographics, baseline endoscopic experience,
ERCP-specific experience, and simulator familiarity.
Simulator
The second-generation Boškoski-Costamagna ERCP Trainer (Cook Medical, Limerick, Ireland)
was used in this study. This is a mechanical simulator and consists of a metal framework
with the esophagus, stomach, and duodenum constructed from plastic. The simulator
has been designed to train novice endoscopists on correct positioning of the endoscope,
assuming that a successful ERCP is largely dependent upon the ability to achieve an
optimal position of the endoscope in front of the papilla. The simulator enables use
of a real duodenoscope and commercially available accessories. Training options include
positioning of the endoscope in front of the papilla, cannulation of the CBD, cannulation
of the pancreatic duct, removal of a CBD stone using a coffee bean, and stent placement.
In this model, it was not yet possible to practice sphincterotomy. A small video camera
provides simulated fluoroscopy. The simulator has been previously described in detail
in a validation study [11 ]. The simulator is depicted in [Fig. 1 ]
.
Fig. 1 The Boškoski-Costamagna ERCP Trainer.
Two-day ERCP training program
The 2-day ERCP simulator training course is hosted in the European Endoscopy Training
Centre (EETC) at the Gemelli University Hospital, Rome, Italy, and a comparable training
setting has been set up at the Eastern Hepatobiliary Hospital, Second Military Medical
University, Shanghai, China. The course includes lectures, live ERCP demonstrations,
and hands-on ERCP training to teach trainees the basic techniques related to cannulation,
stent placement, stone extraction, and stricture management. The program starts with
a lecture on the basics of cannulation and sphincterotomy techniques, followed by
a 2-hour session of live demonstrations focusing on the position of the endoscope
and cannulation techniques. In the afternoon, trainees receive hands-on training on
the simulator for at least 3.5 hours. The second day starts with a lecture on prevention
of biliopancreatic complications followed by live demonstration with additional lectures
on stent and stricture management.
Subsequently, the trainees are again exposed to hands-on training for at least 2.5
hours. During these hands-on training sessions, trainees are able to extensively practice
the various techniques under the supervision of experienced endoscopists. The course
content was delivered by the EETC faculty and the visiting faculty. The group comprised
a maximum of 10 trainees and at least one or two ERCP practitioners of the visiting
faculty were present. Five Boškoski-Costamagna ERCP Trainers were available for hands-on
training. Two trainees were allocated per simulator. Both trainees alternated in their
role as assistant and endoscopist. ERCP training was performed using a standard therapeutic
duodenoscope (PENTAX Medical, Hoya Corp., Tokyo, Japan) and commercially available
accessories from Cook Medical, Limerick, Ireland.
Rotterdam Assessment Form for ERCP
Both the SG and CG started their formal ERCP training in a real-life setting in patients
at their own departments. The Rotterdam Assessment Form for ERCP (RAF-E) was used
to register and score each performed ERCP. In 2014, Ekkelenkamp et al. [13 ] demonstrated that this self-assessment tool allows both trainees and trainers to
gain insight in procedural quality of ERCP procedures by means of proposed ERCP quality
indicators [14 ]. The tool was used in a second study to evaluate the learning curves of novice trainees
[15 ]. The RAF-E form is largely based on previously validated assessment tools. All ERCPs
performed in this study were part of routine clinical care performed at the participating
centers, regardless of the indication for ERCP and a previously performed sphincterotomy.
Participants completed a RAF-E form after each procedure.
Historical cohort
Results in terms of successful biliary cannulation rates for both SG and CG were plotted
against a historical cohort (HC) of 15 ERCP trainees. In 2014, Ekkelenkamp et al., from the same research group, published the results of a prospective study evaluating
the ERCP learning curves of 15 novice trainees in the Netherlands [15 ]. A total of 1541 ERCPs were included in the study. The trainees followed their regular
training program, without previous ERCP simulator training, and documented each performed
ERCP using the RAF-E.
Outcome measures
The main outcome measure was successful CBD cannulation rate. In a previous study
by our group [15 ], we have demonstrated that CBD cannulation can be regarded as a surrogate marker
for procedural competence. The curve for CBD cannulation is comparable to those for
therapeutic interventions such as stent placement and sphincterotomy. This means that
the learning curve for overall CBD cannulation success can be used for quick information
about whether an individual trainee is progressing according to the expected group
learning curve or not. It reflects the corresponding learning curves for therapeutic
interventions. For this reason, our focus in the current study was solely on cannulation
success rates. Therapeutic interventions and procedural success were not necessarily
reported for all procedures.
Statistical analysis
Statistical analyses were performed using SPSS 25.0 software (IBM Corp: Armonk, New
York, United States). Baseline characteristics, group averages and standard deviations
were presented in mean, median with standard deviation or interquartile range, respectively.
A two-sided P <0.05 was considered significant. Graphs were created with standard software.
A simple moving average technique was used to analyze the ERCP learning curves of
the trainees based on successful cannulation rates. The moving average technique depicts
data points by creating a series of averages of different subsets of the complete
data set. A moving average creates a trend line that partially compensated for outlying
results and displays a learning curve over time that is easier to interpret compared
to a loose set of data points. It is a method that is used in a number of studies
regarding learning curves [15 ]
[16 ]
[17 ]. The mean number of successful cannulations of the CBD was calculated for each trainee
over blocks of 10 ERCP procedures. A rising moving average indicates a positive learning
curve plotted in successful CBD cannulation rates.
Results
A total of 13 trainees (9 male) from six countries were included in this study. The
SG consisted of six trainees. The remaining seven trainees were assigned to the CG.
The mean age of the trainees was 32 years. Five trainees (38.5%) had been trained
previously on a simulator (gastroduodenoscopy or colonoscopy simulator training),
two were assigned to the SG and three trainees to the CG. Ten trainees had no previous
ERCP experience, two trainees had a maximum of 10 previously performed ERCPs (in each
group one trainee), and one trainee had performed a maximum of 20 procedures and was
included in CG. The SG performed around 30 procedures per person during the 2-day
training course. Overall, the group of trainees performed a total of 717 ERCPs at
their own institutions. The median number of ERCP procedures per trainee performed
during the study period was 24 procedures with a broad range of nine to 153 procedures.
The median number of ERCPs in the simulator training group was significantly higher
than in the conventional training group (56 versus 22 procedures, P = 0.002). The overall percentage of ERCPs performed in patients with a native major
papilla was 52.4% and did not differ significantly between groups. A statistically
significant difference between groups was seen in ERCP difficulty degree (P = 0.001), with more difficult ERCPs in the SG. Baseline characteristics are outlined
in [Table 1 ]
.
Table 1 Baseline characteristics.
Simulator group
Conventional group
Total
P
CBD, common bile duct; ERCP, endoscopic retrograde cholangiopancreatography; ASA,
American Society of Anesthesiologists.
Trainees
6
7
13
Male, n (%)
5 (83.3)
4 (57.1)
9 (69.2)
0.190
Age in years, mean (SD)
33.0 (1.0)
31.2 (2.5)
32.0 (2.1)
Simulator familiarity (%)
2 (33.3)
3 (42.9)
5 (38.5)
0.436
Patient-based ERCP procedures performed, n (%)
383 (53.3)
334 (46.5)
717
0.002
Median number of ERCP procedures, n (range)
56 (13–140)
22 (9–153)
24 (9–153)
Indication
0.089
16 (4.2)
20 (6.0)
36 (5.0)
120 (31.3)
99 (29.6)
219 (30.5)
121 (31.6)
91 (27.2)
212 (29.6)
73 (19.1)
64 (19.2)
137 (19.1)
13 (3.4)
6 (1.8)
19 (2.6)
7 (1.8)
17 (5.1)
24 (3.3)
33 8.6)
37 (11.1)
70 (9.8)
Difficulty degree, n (%)
0.001
187 (48.8)
211 (63.2)
398 (55.5)
161 (42.0)
102 (30.5)
263 (36.7)
35 (9.1)
21 (6.3)
56 (7.8)
Native papillary anatomy, n (%)
0.067
211 (55.1)
165 (49.4)
376 (52.4)
172 (44.9)
169 (50.6)
341 (47.6)
Previous ERCP failure, n (%)
0.336
41 (10.7)
42 (12.6)
83 (11.6)
262 (68.4)
211 (63.2)
473 (66.0)
80 (20.9)
81 (24.3)
161 (22.5)
ASA Score, n (%)
0.000
58 (15.8)
60 (21.6)
118 (18.3)
198 (54.1)
176 (63.3)
374 (58.1)
99 (27.0)
38 (13.7)
137 (21.3)
8 (2.2)
4 (1.4)
12 (1.9)
3 (0.8)
0 (0)
3 (0.5)
Moving average curve
The simple moving average of SG versus CG and HC is plotted in [Fig. 2 ]. The X axis signifies the cumulative ERCP procedure number and the Y axis represents
the percentage of successful CBD cannulation in patient-based ERCP. Mean successful
ERCP cannulation rate was higher for the simulator group at baseline (moving average
after the first 10 ERCPs) compared to both CG and HC, 64% versus 43% and 42%, respectively.
After 40 ERCPs, the differences in successful CBD cannulation become less explicit
between the SG and both the CG and HC, but persisted until a median of 75 ERCPs. At
this point. a successful CBD cannulation rate of 82% is seen in both the SG and CG.
From this point on the available data were too limited to detect a statistical difference
between the learning curves. The HC did not cross the line of the SG and shows a successful
cannulation rate of 68% after 75 procedures.
Fig. 2 Moving average curve for successful CBD cannulation in patient-based ERCP.
Discussion
In this prospective study, we demonstrated that novice ERCP trainees gain significant
experience by training on the mechanical ERCP simulator before they are exposed to
real patients. The 2-day hands-on training course had a positive effect on the performance
of trainees compared to the CG. The effect of simulation-based ERCP training on patient-based
performance lasted up to around 75 ERCPs.
Despite growing awareness that procedure numbers are an inadequate means to define
competence in ERCP, it is still the predominant methodology used to define the competence
of trainees in most training curricula. Several studies have demonstrated that trainees
reach competency at various points in training and that training guidelines underestimate
the number of ERCPs necessary to achieve competence [15 ]
[18 ]. A recent published review by Voiosu et al. [19 ] provides an overview of the current studies concerning trainee competence in ERCP.
Importantly, most trainees do not reach predefined competence thresholds, supporting
the idea that a more individualized approach is necessary. The role of simulator-based
training in ERCP has not been defined yet, but the essence of simulation-based training
is to provide trainees with opportunities to understand the anatomy and to become
familiar with both the endoscope and accessories at their own pace without compromising
patient safety. Simulation-based training creates a unique and safe learning environment
in which to teach trainees the basic skills of ERCP and to provide the trainer with
insights into the learning curve of trainees with the opportunity for timely intervention.
According to our study results, compared to on-the-job learning, a 2-day hands-on
course in a stress-free simulated training environment has a positive impact on the
subsequent learning curve when performing real-life ERCP procedures with a beneficial
effect that lasts up to around 75 procedures. The effect was demonstrated using successful
CBD cannulation rate as the outcome measure. CBD cannulation can be regarded as a
surrogate marker for procedural competence, as seen in a previous study by Ekkelenkamp
et al [15 ].
The effect of simulator-based training is observed immediately from the beginning
of patient-based ERCP performance when measuring successful cannulation in the first
10 procedures with a successful cannulation rate of 64% in the SG compared to 43%
in the CG. Compared to the HC, the CG demonstrates a steeper learning curve potentially
indicating that training options have improved over the last years. Our data correspond
with previous simulator training studies in endoscopy, mostly in the field of training
colonoscopy, demonstrating a significant benefit of simulator training in the early
learning curve [9 ].
Limited data available for simulator training in ERCP concern mainly the ERCP mechanical
simulator (EMS Trainer) demonstrating that trainees who underwent simulator-based
training achieved higher success rates with selective and deep cannulation of the
CBD compared to the CG in the first months of training [20 ]
[21 ]
[22 ]. A potentially valuable addition to the Boškoski-Costamagna ERCP Trainer is the
synthetic papilla, which can be used to train sphincterotomy using commercially available
sphincterotomes and needle knives. The papilla has been validated in a previous study
by our study group [12 ], but was not yet available for training during the study period.
Some limitations of our study need to be considered when interpreting our results.
The number of participating trainees was limited. Results are representative for the
trainees with no or very little real-life ERCP exposure. It cannot be inferred how
these results translate to trainees with limited but more extensive experience (e.g.
50–100 procedures). Dropout of participants who did not continue ERCP training, either
due to insufficient training resources at their respective facilities or the fact
that there was a shift in priorities during their specialty training, prohibit drawing
conclusions beyond 75 procedures. This was not a formal randomized controlled trial
but a paired controlled cohort study with inclusion of the participants of the intervention
group based on their specific interest in attending an ERCP training course, which
may have introduced selection bias. Although the 2-day ERCP simulator training course
was structured and equal for all participants, the real-life training at their respective
institutions was not and was left to the discretion of the local team. To attempt
to partially overcome potential bias in this regard, a trainee from the same training
center was included.
We have included all the performed ERCPs by the trainees regardless of indication
or papilla status. By excluding all cases with previous sphincterotomy, potential
bias might be introduced because these cases do add to the learning curve and might
not be equally distributed chronologically during the training period. By including
all cases regardless of indication or papilla status, we tried to minimize bias in
that regard.
Another fact that needs to be taken into account is that the SG performed more ERCPs
and also more complex ERCPs in comparison to the CG. Although allocation to the SG
or CG group was done after participants had expressed their desire to receive ERCP
training, we cannot rule out potential bias that the most motivated participants entered
the simulator course. Another explanation might also be that after a successful simulator
course, participants experienced a shorter learning curve and were more prepared to
overcome some of the difficulties that ERCP brings.
This study, however, provides ample rationale that simulator training for early-learning-phase
trainees has a beneficial effect and should be considered to have a formal role in
ERCP training curricula. Simulator training provides trainees with the opportunity
to perform the procedure multiple times without risks at their own pace before performing
the procedure on a real patient. It may be inferred that apart from potentially decreasing
complication risks and patient discomfort, less time may be spent per patient in the
early phase of training, thereby increasing procedural capacity. It is our belief
that based on our results, further research is warranted to determine the optimal
duration and extent of simulator training, the optimal simulator to be used, and finally,
how such training should be implemented in the training curricula.
Conclusions
In conclusion, we demonstrate a positive effect of simulator-based training during
a 2-day hands-on training course in the early learning curve of ERCP trainees prior
to patient-based training. Simulator training should be considered an integral part
of the training curricula for ERCP.