CC BY-NC-ND 4.0 · Indian J Med Paediatr Oncol 2017; 38(03): 409
DOI: 10.4103/ijmpo.ijmpo_118_17
Letters to Editor

Estimation of Cancer Risk Due to Exposure to Airborne Particle Emission of a Commercial Three‑dimensional Printer

Beuy Joob
Sanitation 1 Medical Academic Center, Bangkok, Thailand
,
Viroj Wiwanitkit
Department of Medicine, Faculty of Medicine, University of Nis, Serbia
› Author Affiliations
Financial support and sponsorship Nil.


Publication History

Article published online:
04 July 2021

© 2017. Indian Society of Medical and Paediatric Oncology. This is an open access article published by Thieme under the terms of the Creative Commons Attribution-NonDerivative-NonCommercial-License, permitting copying and reproduction so long as the original work is given appropriate credit. Contents may not be used for commercial purposes, or adapted, remixed, transformed or built upon. (https://creativecommons.org/licenses/by-nc-nd/4.0/.)

Thieme Medical and Scientific Publishers Pvt. Ltd.
A-12, 2nd Floor, Sector 2, Noida-201301 UP, India

 
  • References

  • 1 Yi J, LeBouf RF, Duling MG, Nurkiewicz T, Chen BT, Schwegler-Berry D, et al. Emission of particulate matter from a desktop three-dimensional (3D) printer. J Toxicol Environ Health A 2016;79:453-65.
  • 2 Stabile L, Scungio M, Buonanno G, Arpino F, Ficco G. Airborne particle emission of a commercial 3D printer: The effect of filament material and printing temperature. Indoor Air 2017;27:398-408.
  • 3 Azimi P, Zhao D, Pouzet C, Crain NE, Stephens B. Emissions of ultrafine particles and volatile organic compounds from commercially available desktop three-dimensional printers with multiple filaments. Environ Sci Technol 2016;50:1260-8.
  • 4 Joob B, Wiwanitkit V. Estimation of cancer risk due to exposure to lead contamination in Thai Ayurveda products. Indian J Cancer 2015;52:550.
  • 5 Liao CM, Chio CP, Chen WY, Ju YR, Li WH, Cheng YH, et al. Lung cancer risk in relation to traffic-related nano/ultrafine particle-bound PAHs exposure: A preliminary probabilistic assessment. J Hazard Mater 2011;190:150-8.
  • 6 Stephens B, Azimi P, Orch ZE, Ramos T. Ultrafine particle emissions from desktop 3D printers. Atmos Environ 2013;79:334-9.