Rofo 2004; 176(5): 709-718
DOI: 10.1055/s-2004-813078
Muskuloskeletales System

© Georg Thieme Verlag Stuttgart · New York

Mehrschicht-CT zur Strukturanalyse des trabekulären Knochens - Vergleich mit Mikro-CT und biomechanischer Festigkeit

Multislice-CT for Structure - Analysis of Trabecular Bone - a Comparison with Micro-CT and Biomechanical StrengthJ. S. Bauer1 , A. S. Issever2 , M. Fischbeck3 , A. Burghardt2 , F. Eckstein3 , E. J. Rummeny1 , S. Majumdar2 , T. M. Link1, 2
  • 1Institut für Röntgendiagnostik der Technischen Universität München
  • 2Department of Radiology, UCSF, San Francisco, CA, USA
  • 3Forschungsgruppe Musculoskelettales System, Anatomische Anstalt der Ludwig-Maximilians-Universität, München
Weitere Informationen

Publikationsverlauf

Publikationsdatum:
06. Mai 2004 (online)

Preview

Zusammenfassung

Ziel: Im Vergleich zur Einschicht-Spiral-CT (ES-CT) hat die Mehrschicht-CT (MS-CT) eine deutlich höhere Ortsauflösung. Ziel dieser Studie war es daher zu prüfen, ob der Zugewinn an Auflösung Vorteile für die Knochenstrukturanalyse in der Osteoporosediagnostik bietet. Material und Methoden: 20 zylinderförmige, trabekuläre Knochenproben (Durchmesser 12 mm, Länge 15 - 20 mm) wurden humanen thorakalen Wirbelsäulenpräparaten (BWK 8) entnommen. Mittels ES- und MS-CT wurden hochauflösende Schnittbilder angefertigt und histomorphometrische Strukturparameter errechnet. Zusätzlich wurde die Knochenmineraldichte (BMD) mittels quantitativer CT bestimmt. Als Goldstandard dienten analoge Strukturparameter aus der Mikro-CT und die biomechanisch bestimmte Versagensspannung (VS) der Proben. Ergebnisse: Die Parameter Knochenvolumenfraktion und trabekuläre Separation aus dem ES- und MS-CT korrelierten hoch mit den entsprechenden Strukturparametern aus der Mikro-CT (bis r2 = 0,84; p < 0,01) und mit der VS (bis r2 = 0,81; p < 0,01). Die höchste Korrelation mit der VS ergab sich für den Parameter trabekuläre Anzahl aus dem MS-CT (r2 = 0,85, p < 0,01). Diese war signifikant (p < 0,05) höher als die Korrelation zwischen VS und BMD (r2 = 0,49). Schlussfolgerung: Mit der MS-CT gemessene Strukturparameter des trabekulären Knochens zeigen hohe Korrelationen mit der Mikro-CT, so dass eine klinische Charakterisierung der trabekulären Struktur möglich erscheint. Mittels MS-CT akquirierte Strukturparameter waren in dieser experimentellen Studie für die Vorhersage der biomechanischen Festigkeit am besten geeignet.

Abstract

Objectives: MS-CT (Multislice-Spiral-CT) has a higher spatial resolution compared to the SS-CT (Singleslice-CT). The purpose of this study was to investigate, if the higher spatial resolution of the MS-CT has advantages for structural analyses in the assessment of osteoporosis. Material and Methods: 20 cylindrical trabecular bone specimens (diameter 12 mm, length 15 - 20 mm) were harvested from formalin-fixed human thoracic spines. All specimens were examined by Micro-CT and quantitative, histomorphologic parameters were determined. Analogous structural parameters were calculated from the high-resolution images acquired by both MS- and SS-CT. Additionally, the BMD (bone mineral density) was measured by QCT (quantitative CT). The maximum compressive strength (MCS) was determined in a biomechanical test. The structural parameters were correlated with the histomorphologic parameters and with the MCS. Results: The parameters bone fraction and trabecular separation correlated significantly in both MS- and SS-CT with the analogous parameters from Micro-CT (r2 = 0.84, p < 0.01) and the MCS (r2 = 0.81, p < 0.01). The highest correlation with the MCS was calculated using the trabecular number measured by MS-CT in the superior region near the endplate of the vertebra with the high-resolution kernel U90 u (r2 = 0.85, p < 0.01). This correlation was significantly higher than the correlation between MCS and BMD (r2 = 0.49, p < 0.01). Conclusion: Micro-CT- and MS-CT-determined structural parameters of the trabecular bone showed significant, high correlations. Thus, a characterisation of the trabecular structure seems to be possible. The biomechanical stability of the bone can also be predicted well. The structural parameters acquired by MS-CT show higher correlations with the MCS than the BMD or structural parameters determined by SS-CT do. In this study MS-CT was best suited to predict biomechanical strength of trabecular bone.

Literatur

Prof. Dr. med. Thomas M. Link

Department of Radiology at UCSF

400 Parnassus Ave

Box 0628

San Francisco, CA 94143, USA

eMail: tmlink@radiology.ucsf.com