Color Appearance of Various Provisional Restorative Materials for Rehabilitation Upon Aging

Abstract

Objectives Color stability of provisional restoration is crucial for full mouth reconstruction, which is probably influenced by aging. Therefore, this study evaluated the effect of aging on the color appearance of different provisional materials.

Materials and Methods Rectangular specimens (10 × 10 × 2 mm) were fabricated from computer-aided design-computer-aided manufacturing (CAD-CAM) (Vita CAD-Temp [VC], TelioCAD [TC], artBloc [RC]), autopolymerized (ProtempIV [PA], Luxatemp [LA], UnifastTrad [UA]), and heat-polymerized polymer (Major C&B [MH]). Each was divided into aging (AG, 5,000 thermocycles of 5°/55°C) and non-aging group (n = 21/group). Color parameters were determined using a spectrophotometer through the CIELAB system. The L*, a*, and b* data were calculated for color appearance (∆E), translucency parameter (TP), contrast ratio (CR), and opalescence parameter (OP) for each.

Statistical Analysis An analysis of variance and multiple comparisons were determined for a significant difference in color appearance alteration of materials upon aging (α = 0.05).

Results Statistically significant differences of L*, a*, b*, ∆E, TP, CR, and OP due to the effect of types of material (p < 0.05), aging effect (p < 0.05), and their interactions (p < 0.05) were indicated. Aging affects the color appearance, lightness, chromaticity, translucency, contrast, and opalescence of various types of provisional materials. Color appearance alteration of provisional materials was significantly indicated upon aging (p < 0.05) but within the perceivable limit of clinical acceptance (∆E _diff < 3.0), except for PA and MH. Color stability of CAD-CAM-based poly-methyl methacrylate (PMMA) and autopolymerized PMMA upon aging were better than bis-acryl resin and heat-polymerized PMMA. The TP, CR, and OP alterations of tested materials upon aging were within the perceivable limit.

Conclusion Color appearance of provisional restorative materials was influenced by aging. The CAD-CAM-based PMMA and autopolymerized PMMA materials showed better color stability than bis-acryl provisional resin and heat-polymerized PMMA upon aging. Therefore, they were suggested as provisional materials for oral rehabilitation.

Keywords

CAD/CAM - color stability - provisional materials - polymer - resin - temporary restoration

Publikationsverlauf

Artikel online veröffentlicht:
11. Januar 2023

• References

• 1 Zafar MS. Prosthodontic applications of polymethyl methacrylate (PMMA): an update. Polymers (Basel) 2020; 12 (10) 2299
• 2 Rayyan MM, Aboushelib M, Sayed NM, Ibrahim A, Jimbo R. Comparison of interim restorations fabricated by CAD/CAM with those fabricated manually. J Prosthet Dent 2015; 114 (03) 414-419
• 3 Haselton DR, Diaz-Arnold AM, Dawson DV. Color stability of provisional crown and fixed partial denture resins. J Prosthet Dent 2005; 93 (01) 70-75
• 4 Wilkins RG. Long-term provisional bonded composite restorations make full-mouth rehabilitation possible. Compend Contin Educ Dent 2016; 37 (05) 326-331
• 5 Sadighpour L, Geramipanah F, Falahchai M, Tadbiri H. Marginal adaptation of three-unit interim restorations fabricated by the CAD-CA systems and the direct method before and after thermocycling. J Clin Exp Dent 2021; 13 (06) e572-e579
• 6 Ender A, Bienz S, Mörmann W, Mehl A, Attin T, Stawarczyk B. Marginal adaptation, fracture load and macroscopic failure mode of adhesively luted PMMA-based CAD/CAM inlays. Dent Mater 2016; 32 (02) e22-e29
• 7 Stawarczyk B, Liebermann A, Eichberger M, Güth JF. Evaluation of mechanical and optical behavior of current esthetic dental restorative CAD/CAM composites. J Mech Behav Biomed Mater 2015; 55: 1-11
• 8 Kang SY, Park JH, Kim JH, Kim WC. Accuracy of provisional crowns made using stereolithography apparatus and subtractive technique. J Adv Prosthodont 2018; 10 (05) 354-360
• 9 Lee YJ, Oh SC. Comparative evaluation of the subtractive and additive manufacturing on the color stability of fixed provisional prosthesis materials. J Dent Rehabil Appl Sci 2021; 37 (02) 73-80
• 10 Abdullah AO, Pollington S, Liu Y. Comparison between direct chairside and digitally fabricated temporary crowns. Dent Mater J 2018; 37 (06) 957-963
• 11 Elagra MI, Rayyan MR, Alhomaidhi MM, Alanaziy AA, Alnefaie MO. Color stability and marginal integrity of interim crowns: an in vitro study. Eur J Dent 2017; 11 (03) 330-334
• 12 Tetè G, Sacchi L, Camerano C. et al. Management of the delicate phase of the temporary crown: an in vitro study. J Biol Regul Homeost Agents 2020; 34 (6, Suppl. 3): 69-80
• 13 Aburaisi S, Basha A, Al Najjar K, Al Saqat H, Al Askar F, Al Nazer F. The colour stability of crystallized acetyl resin material in comparison to other restorative materials. An in-vitro study. BDJ Open 2021; 7 (01) 11
• 14 Mosharraf R, Givehchian P, Ansaripour F. Comparison of color stability and fracture resistance of two temporary fiber-reinforced fixed partial denture materials. Dent Res J (Isfahan) 2019; 16 (03) 185-192
• 15 Almohareb T, Alkatheeri MS, Vohra F, Alrahlah A. Influence of experimental staining on the color stability of indirect computer-aided design/computer-aided manufacturing dental provisional materials. Eur J Dent 2018; 12 (02) 269-274
• 16 Lee YK. Opalescence of human teeth and dental esthetic restorative materials. Dent Mater J 2016; 35 (06) 845-854
• 17 Lee YK. Translucency changes of direct esthetic restorative materials after curing, aging and treatment. Restor Dent Endod 2016; 41 (04) 239-245
• 18 Vichi A, Ferrari M, Davidson CL. Color and opacity variations in three different resin-based composite products after water aging. Dent Mater 2004; 20 (06) 530-534
• 19 Falkensammer F, Arnetzl GV, Wildburger A, Freudenthaler J. Color stability of different composite resin materials. J Prosthet Dent 2013; 109 (06) 378-383
• 20 Doray PG, Li D, Powers JM. Color stability of provisional restorative materials after accelerated aging. J Prosthodont 2001; 10 (04) 212-216
• 21 Givens Jr EJ, Neiva G, Yaman P, Dennison JB. Marginal adaptation and color stability of four provisional materials. J Prosthodont 2008; 17 (02) 97-101
• 22 Turgut S, Bagis B, Ayaz EA. et al. Discoloration of provisional restorations after oral rinses. Int J Med Sci 2013; 10 (11) 1503-1509
• 23 Hensel F, Koenig A, Doerfler HM, Fuchs F, Rosentritt M, Hahnel S. CAD/CAM resin-based composites for use in long-term temporary fixed dental prostheses. Polymers (Basel) 2021; 13 (20) 3469
• 24 Ceci M, Viola M, Rattalino D, Beltrami R, Colombo M, Poggio C. Discoloration of different esthetic restorative materials: a spectrophotometric evaluation. Eur J Dent 2017; 11 (02) 149-156
• 25 Mazaro JVQ, Minani LM, Zavanelli AC, Mello CC, Lemos CAA. Evaluation of color stability of different temporary restorative materials. Rev Odontol UNESP 2015; 44 (05) 262-267
• 26 Cunha LFd, Fernandes ABF, Mushashe AM, Correr GM, Gonzaga CC. Physical properties of two bis-acryl interim materials: color stability, flexural strength, and shear bond strength to flowable composite resin as add-on material. Braz J Oral Sci 2017; 16: 1-8
• 27 Nóbrega AS, Neto CLMM, Dos Santos DM, Bertoz APM, MeloMoreno AL, Goiato MC. Effect of accelerated aging on the sorption and solubility percentages of silicone facial prostheses. Eur J Dent 2022; 16 (01) 223-226
• 28 Morresi AL, D'Amario M, Capogreco M. et al. Thermal cycling for restorative materials: does a standardized protocol exist in laboratory testing? A literature review. J Mech Behav Biomed Mater 2014; 29: 295-308
• 29 Bayindir F, Kürklü D, Yanikoğlu ND. The effect of staining solutions on the color stability of provisional prosthodontic materials. J Dent 2012; 40 (Suppl. 02) e41-e46
• 30 Della Bona A, Nogueira AD, Pecho OE. Optical properties of CAD-CAM ceramic systems. J Dent 2014; 42 (09) 1202-1209