Subscribe to RSS
Download PDF
DOI: 10.1055/s-0040-1716995
Designer Cranioplasty at Budget Prices: A Novel Use of 3D Printing Technology
Abstract
Background Cranioplasty using synthetic materials for restoration of the exact shape of the skull has always remained a challenge until the development of 3D printing technology. However, the high-cost of available 3D printed implants limits their extensive use.
Objectives To study the effectiveness of a low-cost, 3D-printed template for molding the polymethyl methacrylate (PMMA) (bone cement) in order to achieve exact contours of the skull specific to each patient.
Materials and Methods 10 cranioplasties have been performed between July 2018 to December 2019 in a variety of craniotomy defects using bone cement flaps shaped using custom-made molds. The mold was 3D-printed and based on each patient’s CT images in digital imaging and communications in medicine (DICOM). Miniplates and screws were used to fix the flap. Postoperatively, clinical and radiological evaluation were done to assess patient satisfaction and accuracy of contour achieved.
Results Patient satisfaction as well as accuracy of contouring, as seen on postoperative CT scans, were excellent. There were no notable complications on follow-up.
Conclusion PMMA cranioplasty flap, contoured using a 3D-printed mold, is a very cost-effective alternative for restoration of skull contour for various craniotomy defects.
Polymethyl methacrylate (PMMA) molded to form the exact shape of lost calvarium using 3D printed plastic templates is a smart and economical solution.
Publication History
Article published online:
09 March 2021
© 2021. Neurological Surgeons’ Society of India. This is an open access article published by Thieme under the terms of the Creative Commons Attribution-NonDerivative-NonCommercial-License, permitting copying and reproduction so long as the original work is given appropriate credit. Contents may not be used for commercial purposes, or adapted, remixed, transformed or built upon. (https://creativecommons.org/licenses/by-nc-nd/4.0/).
Thieme Medical and Scientific Publishers Private Ltd.
A-12, Second Floor, Sector -2, NOIDA -201301, India
-
References
- 1 Marbacher S, Andereggen L, Erhardt S. et al Intraoperative template-molded bone flap reconstruction for patient-specific cranioplasty. Neurosurg Rev 2012; 35 (04) 527-535 discussion 535
- 2 Fiaschi P, Pavanello M, Imperato A. et al Surgical results of cranioplasty with a polymethylmethacrylate customized cranial implant in pediatric patients: a single-center experience. J Neurosurg Pediatr 2016; 17 (06) 705-710
- 3 Luo J, Liu B, Xie Z. et al Comparison of manually shaped and computer-shaped titanium mesh for repairing large frontotemporoparietal skull defects after traumatic brain injury. Neurosurg Focus 2012; 33 (01) E13
- 4 Courville CB. Cranioplasty in prehistoric times. Bull Los Angel Neuro Soc 1959; 24 (01) 1-8
- 5 Stula D. Cranioplasty. Berlin: Springer 1985
- 6 Sanan A, Haines SJ. Repairing holes in the head: a history of cranioplasty. Neurosurgery 1997; 40 (03) 588-603
- 7 Gladstone HB, McDermott MW, Cooke DD. Implants for cranioplasty. Otolaryngol Clin North Am 1995; 28 (02) 381-400
- 8 Ellis W. Polynesian Researches Vol. III, London: Fisher, Son & Jackson 1836: 34
- 9 Vanaclocha V, Sáiz-Sapena N, García-Casasola C, De Alava E. Cranioplasty with autogenous autoclaved calvarial bone flap in the cases of tumoural invasion. Acta Neurochir (Wien) 1997; 139 (10) 970-976
- 10 Moreira-Gonzalez A, Jackson IT, Miyawaki T, Barakat K, DiNick V. Clinical outcome in cranioplasty: critical review in long-term follow-up. J Craniofac Surg 2003; 14 (02) 144-153
- 11 Marchac D, Greensmith A. Long-term experience with methylmethacrylate cranioplasty in craniofacial surgery. J Plast Reconstr Aesthet Surg 2008; 61 (07) 744-752 discussion 753
- 12 Kirby BS, Doyle A, Gilula LA. Acute bronchospasm due to exposure to polymethylmethacrylate vapors during percutaneous vertebroplasty. AJR Am J Roentgenol 2003; 180 (02) 543-544
- 13 Li C, Mason J, Yakimicki D. Thermal characterization of PMMA-based bone cement curing. J Mater Sci Mater Med 2004; 15 (01) 85-89
- 14 Wolford LM, Cottrell DA, Henry CH. Temporomandibular joint reconstruction of the complex patient with the Techmedica custom-made total joint prosthesis. J Oral Maxillofac Surg 1994; 52 (01) 2-10 discussion 11
- 15 Rotaru H, Baciut M, Stan H. et al Silicone rubber mould cast polyethylmethacrylate-hydroxyapatite plate used for repairing a large skull defect. J Craniomaxillofac Surg 2006; 34 (04) 242-246
- 16 Blake GB, MacFarlane MR, Hinton JW. Titanium in reconstructive surgery of the skull and face. Br J Plast Surg 1990; 43 (05) 528-535
- 17 Chim H, Schantz J-T. New frontiers in calvarial reconstruction: integrating computer-assisted design and tissue engineering in cranioplasty. Plast Reconstr Surg 2005; 116 (06) 1726-1741