Thromb Haemost 1995; 73(01): 066-072
DOI: 10.1055/s-0038-1653727
Original Article
Coagulation
Schattauer GmbH Stuttgart

Occlusive Thrombus Formation on Indwelling Catheters: In Vitro Investigation and Computational Analysis

Peter Friedrich
The GSF-Research Center for Environment and Health, Department of Physiology, Oberschleißheim, Germany
,
Armin J Reininger
1   Technical University, Institute of Anatomy, München, Germany
› Author Affiliations
Further Information

Publication History

Received 12 April 1994

Accepted after resubmission 12 September 1994

Publication Date:
09 July 2018 (online)

Preview

Summary

To determine the hydrodynamic parameters involved in thrombus formation on indwelling catheters, fibrin coagulation was investigated in an in vitro model and compared with the prevailing flow field. Computational analysis was used to simulate clot growth and identify the variables which determine its localization. The fibrin clot grew from the distal end of the catheter along the interface between the bulk stream and the annular vortex located immediately downstream of the catheter tip, finally filling the entire vortex. The calculations of flow parameters for three different growth stages showed that regions of clot formation always correlated with regions exhibiting the longest residence time. Fibrin clotting could be simulated by a mathematical model using residence time as the only variable parameter. Our results demonstrate that the residence time is the single most important flow factor for fibrin coagulation and thus probably for thrombus formation. When the residence time equals the clotting time for the fluid, thrombus formation is initiated. Conversely, it ceases when the area of long fluid residence times is replaced by a fibrin clot. Hence the fibrin clot represents a hydrodynamic optimization of the previously disturbed flow.