Vet Comp Orthop Traumatol 1991; 4(04): 116-119
DOI: 10.1055/s-0038-1633265
Original Research
Schattauer GmbH

Mechanical Analysis of the Veterinary Cuttable Plate

A. M. Fruchter
1   From the Department of Clinical Studies, Ontario Veterinary College, University of Guelph, Guelph, Ontario, Canada
,
D. L. Holmberg
1   From the Department of Clinical Studies, Ontario Veterinary College, University of Guelph, Guelph, Ontario, Canada
› Author Affiliations
Further Information

Publication History

Received for publication 04 January 1991

Publication Date:
06 February 2018 (online)

Summary

A laboratory model was chosen to compare the stiffness of various small bone plates during the application of a bending force. Forces were applied to and measured from the plate surface directly. Other compressible materials were not in contact with the supporting or measuring devices. Although we cannot recommend from this experimental model that the stiffest plate would be the best treatment option, we can conclude that: (1) the stiffness of two stacked veterinary cuttable plates was approximately equal to the sum of the stiffness for each plate, (2) screw size did not have an effect on the stiffness of the veterinary cuttable plate in three out of four comparisons, and (3) single and stacked veterinary cuttable plates were stiffer than mini bone plates accepting 1.5 mm and 2.0 mm cortical screws and less stiff than the 2.7 mm dynamic compression plate.

 
  • References

  • 1 Montavon PM, Pohler OEM, Olmstead ML, Wendelburg KL. The Mini Instrument and Implant Set and its Clinical Application. VCOT 1988; 1: 44-51..
  • 2 Bruse S, Dee J, Prieur WD. Internal Fixation with a Veterinary Cuttable Plate. VCOT 1989; 1: 40-6..
  • 3 Sumner-Smith G, Kuzma AB. A Technique for Arthrodesis of the Canine Tarsocrural Joint. J Small Anim Pract 1989; 30: 65-7..
  • 4 Kuzma AB, Hunter B. A New Technique for Avian Fracture Repair Using Intramedullary Polymethylmethacrylate and Bone Plate Fixation. J Am Anim Hosp Assoc 1991; 27: 239-48..
  • 5 Shingley JE. Bending Stresses. In: Applied Mechanics of Materials. Shingley JE, Clark BJ, Gardner M. (eds.). New York: McGraw-Hill Book Co.; 1976: 140-6.
  • 6 Pohler OEM, Straumann F. Mechanical Properties of Implants. In: Manual of Internal Fixation In Small Animals. Brinker WO, Hohn RB, Prieur WD. (eds.). Berlin: Springer; 1984: 91-3.