Cobalt-Catalyzed Direct Alkenylation of 2-Methylquinolines with Aldehydes via C(sp3)–H Functionalization in Water

Zaini Jamal; Yong-Chua Teo

doi:10.1055/s-0034-1378355

Synlett, Inhaltsverzeichnis

Synlett 2014; 25(14): 2049-2053
DOI: 10.1055/s-0034-1378355

letter

Cobalt-Catalyzed Direct Alkenylation of 2-Methylquinolines with Aldehydes via C(sp³)–H Functionalization in Water

Autor*innen

Zaini Jamal

Natural Sciences and Science Education, National Institute of Education, Nanyang Technological University, Singapore 637616, Singapore Fax: +6568969414 eMail: yongchua.teo@nie.edu.sg
Yong-Chua Teo*

Natural Sciences and Science Education, National Institute of Education, Nanyang Technological University, Singapore 637616, Singapore Fax: +6568969414 eMail: yongchua.teo@nie.edu.sg

Abstract

Alle Artikel dieser Rubrik

Abstract

The direct C(sp³)–H alkenylation of 2-methylquinolines with aldehydes as a simple methodology to afford 2-alkenylated quinolines is reported. In the presence of catalytic CoCl₂ in water, the economically and ecologically sound transformation is proposed to proceed via the direct benzylic addition to the aldehyde followed by an elimination step to provide 2-alkenylated quinolines in good to excellent yield of up to 95%.

Key words

aldehydes - alkenylation - aza-arenes - C–H functionalization - cobalt

Volltext

Referenzen

References and Notes

1a Gulevich AV, Dudnik AS, Chernyak N, Gevorgyan V. Chem. Rev. 2013; 113: 3084
1b Sridharan V, Suryavanshi PA, Menéndez JC. Chem. Rev. 2011; 111: 7157
1c Cho SH, Kim JY, Kwak J, Chang S. Chem. Soc. Rev. 2011; 40: 5068
1d Barluenga J, Rodríguez F, Fañanás FJ. Chem. Asian J. 2009; 4: 1036
1e Kouznetsov VV, Méndez LY. V, Gómez CM. M. Curr. Org. Chem. 2005; 9: 141

2a Jazzar R, Hitce J, Renaudat A, Sofack-Kreutzer J, Baudoin O. Chem. Eur. J. 2010; 16: 2654
2b Thansandote P, Lautens M. Chem. Eur. J. 2009; 15: 5874
2c Tobisu M, Chatani N. Angew. Chem. Int. Ed. 2006; 45: 1683
2d Godula K, Sames D. Science 2006; 312: 67
2e Kakiuchi F, Chatani N. Adv. Synth. Catal. 2003; 345: 1077

3a Guan B.-T, Hou Z. J. Am. Chem. Soc. 2011; 133: 18086
3b Mousseau JJ, Bull JA, Charette AB. Angew. Chem. Int. Ed. 2010; 49: 1115
3c Wu J, Cui X, Chen L, Jiang G, Wu Y. J. Am. Chem. Soc. 2009; 131: 13888
3d Tobisu M, Hyodo I, Chatani N. J. Am. Chem. Soc. 2009; 131: 12070
3e Nakao Y, Kanyiva KS, Hiyama T. J. Am. Chem. Soc. 2008; 130: 2448
3f Larivée A, Mousseau JJ, Charette AB. J. Am. Chem. Soc. 2007; 130: 52
3g Kanyiva KS, Nakao Y, Hiyama T. Angew. Chem. Int. Ed. 2007; 46: 8872
3h Leclerc J.-P, Fagnou K. Angew. Chem. Int. Ed. 2006; 45: 7781
3i Campeau L.-C, Rousseaux S, Fagnou K. J. Am. Chem. Soc. 2005; 127: 18020

4a Li Y, Guo F, Zha Z, Wang Z. Chem. Asian J. 2013; 8: 534
4b Graves VB, Shaikh A. Tetrahedron Lett. 2013; 54: 695
4c Jin J.-J, Niu H.-Y, Qu G.-R, Guo H.-M, Fossey JS. RSC Adv. 2012; 2: 5968
4d Rueping M, Tolstoluzhsky N. Org. Lett. 2011; 13: 1095
4e Qian B, Xie P, Xie Y, Huang H. Org. Lett. 2011; 13: 2580
4f Komai H, Yoshino T, Matsunaga S, Kanai M. Org. Lett. 2011; 13: 1706
4g Qian B, Guo S, Xia C, Huang H. Adv. Synth. Catal. 2010; 352: 3195
4h Qian B, Guo S, Shao J, Zhu Q, Yang L, Xia C, Huang H. J. Am. Chem. Soc. 2010; 132: 3650

5a Yan G, Wu X, Yang M. Org. Biomol. Chem. 2013; 11: 5558
5b Ogata Y, Kawasaki A, Hirata H. J. Chem. Soc., Perkin Trans. 2 1972; 1120
5c Kaslow CE, Stayner RD. J. Am. Chem. Soc. 1945; 67: 1716

6a Miao C.-X, Wang J.-Q, Wu Y, Du Y, He L.-N. ChemSusChem 2008; 1: 236
6b Lin Y.-M, Boucau J, Li Z, Casarotto V, Lin J, Nguyen AN, Ehrmantraut J. Org. Lett. 2007; 9: 567
6c Huber A, Müller L, Elias H, Klement R, Valko M. Eur. J. Inorg. Chem. 2005; 1459
6d Harrowven DC, Nunn MI. T, Blumire NJ, Fenwick DR. Tetrahedron 2001; 57: 4447
6e Kobayashi S, Busujima T, Nagayama S. Chem. Eur. J. 2000; 6: 3491

7a Butler RN, Coyne AG. Chem. Rev. 2010; 110: 6302
7b Herrerías CI, Yao X, Li Z, Li C.-J. Chem. Rev. 2007; 107: 2546

8 Bull JA, Mousseau JJ, Pelletier G, Charette AB. Chem. Rev. 2012; 112: 2642

9a Halama A, Jirman J, Boušková O, Gibala P, Jarrah K. Org. Process Res. Dev. 2010; 14: 425
9b Liang J, Lalonde J, Borup B, Mitchell V, Mundorff E, Trinh N, Kochrekar DA, Nair Cherat R, Pai GG. Org. Process Res. Dev. 2009; 14: 193
9c Merschaert A, Boquel P, Van Hoeck J.-P, Gorissen H, Borghese A, Bonnier B, Mockel A, Napora F. Org. Process Res. Dev. 2006; 10: 776
9d Larsen RD, Corley EG, King AO, Carroll JD, Davis P, Verhoeven TR, Reider PJ, Labelle M, Gauthier JY, Xiang YB, Zamboni RJ. J. Org. Chem. 1996; 61: 3398
9e Labelle M, Belley M, Gareau Y, Gauthier JY, Guay D, Gordon R, Grossman SG, Jones TR, Leblanc Y, McAuliffe M, McFarlane C, Masson P, Metters KM, Ouimet N, Patrick DH, Piechuta H, Rochette C, Sawyer N, Xiang YB, Pickett CB, Ford-Hutchinson AW, Zamboni RJ, Young RN. Bioorg. Med. Chem. Lett. 1995; 5: 283
9f King AO, Corley EG, Anderson RK, Larsen RD, Verhoeven TR, Reider PJ, Xiang YB, Belley M, Leblanc Y. J. Org. Chem. 1993; 58: 3731
9g McNamara JM, Leazer JL, Bhupathy M, Amato JS, Reamer RA, Reider PJ, Grabowski EJ. J. J. Org. Chem. 1989; 54: 3718

10 General Procedure To an 8 mL screw-capped reaction vial equipped with a magnetic stirrer bar, CoCl₂ (1.3 mg, 2.0 mol%), 2-methyl-quinoline (0.5 mmol), aldehyde (1.0 mmol), and H₂O (0.3 mL) were added. The resulting mixture was placed into a preheated oil bath at 120 °C with vigorous stirring. After 24 h, the reaction mixture was removed from the oil bath, allowed to cool to r.t. and poured into H₂O (10 mL). The mixture was then extracted with EtOAc (3 × 20 mL), washed with brine (40 mL), dried over Na₂SO₄, filtered, and the solvent removed under reduced pressure. The crude product was then loaded onto a column of silica gel suspended in hexane. Purification by flash chromatography (hexane–EtOAc = 95:5, v/v) then gave the pure alkenylation product. (E)-2-(4-Bromostyryl)quinoline (3ad) Pale yellow solid in 91% yield (141.8 mg). ¹H NMR (400 MHz, CDCl₃): δ = 8.08 (d, J = 8.4 Hz, 2 H), 7.76 (d, J = 8.0 Hz, 1 H), 7.70 (t, J = 7.62 Hz, 1 H), 7.62–7.58 (m, 2 H), 7.51–7.45 (m, 5 H), 7.35 (d, J = 16.4 Hz, 1 H). ¹³C NMR (100 MHz, CDCl₃): δ = 155.6, 148.3, 136.5, 135.5, 133.1, 132.0, 129.9, 129.7, 129.3, 128.7, 127.5, 127.4, 126.3, 122.6, 119.4. ESI-HRMS: m/z calcd for C₁₇H₁₃BrN [M + H]: 310.0231; found: 310.0234. (E)-2-[2-(Pyridin-3-yl)vinyl]quinoline (5ad) Pale yellow solid in 86% yield (100.2 mg). ¹H NMR (400 MHz, CDCl₃): δ = 8.83 (s, 1 H), 8.54 (s, 1 H), 8.10 (dd, J ₁ = 8.4 Hz, J ₂ = 12.2 Hz, 2 H), 7.92 (d, J = 8.0 Hz, 1 H), 7.78–7.61 (m, 4 H), 7.50 (t, J = 7.4 Hz, 1 H), 7.42 (d, J = 16.4 Hz, 1 H), 7.30 (dd, J ₁ = 5.2 Hz, J ₂ = 8.0 Hz 1 H). ¹³C NMR (100 MHz, CDCl₃): δ = 155.2, 149.4, 149.2, 148.2, 136.6, 133.3, 132.3, 130.9, 130.6, 129.9, 129.3, 127.55, 127.52, 126.5, 123.7, 119.4. ESI-HRMS: m/z calcd for C₁₆H₁₃N₂ [M + H]: 233.1078; found: 233.1075. (E)-8-Chloro-2-styrylquinoline (3da) This compound was prepared in a similar procedure to the general procedure with 5.0 mol% CoCl₂ at 140 °C for 48 h to afford a pale yellow solid in 84% yield (111.3 mg). ¹H NMR (400 MHz, CDCl₃): δ = 8.09 (d, J = 8.8 Hz, 1 H), 7.81 (dd, J ₁ = 1.0 Hz, J ₂ = 7.4 Hz, 1 H), 7.75 (d, J = 16.4 Hz, 1 H), 7.70–7.64 (m, 4 H), 7.48–7.32 (m, 5 H). ¹³C NMR (100 MHz, CDCl₃): δ = 156.6, 144.4, 136.6, 136.3, 135.3, 133.3, 129.8, 128.8, 128.75, 128.73, 128.5, 127.4, 126.6, 125.9, 120.0. ESI-HRMS: m/z calcd for C₁₇H₁₃ClN [M + H]: 266.0736; found: 266.0739.

Zusatzmaterial

Supporting Information (PDF) (opens in new window)