Synlett 2014; 25(07): 977-982
DOI: 10.1055/s-0033-1340846
letter
© Georg Thieme Verlag Stuttgart · New York

Ion-Tagged Phosphines as Ligands for Suzuki Coupling of Aryl Halides in a Phosphonium Ionic Liquid

Adam J. Keith
a   Department of Chemistry and School of Green Chemistry and Engineering, The University of Toledo, Toledo, OH 43606, USA   Fax: +1(419)5304033   Email: mmason5@utoledo.edu
,
Stephen D. Kosik
b   Department of Medicinal and Biological Chemistry and School of Green Chemistry and Engineering, The University of Toledo, Toledo, OH 43606, USA
,
L. M. Viranga Tillekeratne
b   Department of Medicinal and Biological Chemistry and School of Green Chemistry and Engineering, The University of Toledo, Toledo, OH 43606, USA
,
Mark R. Mason*
a   Department of Chemistry and School of Green Chemistry and Engineering, The University of Toledo, Toledo, OH 43606, USA   Fax: +1(419)5304033   Email: mmason5@utoledo.edu
› Author Affiliations
Further Information

Publication History

Received: 31 December 2013

Accepted after revision: 28 January 2014

Publication Date:
14 March 2014 (online)


Abstract

Gramine-based N-substituted phosphines were synthesized and utilized as ligands in Suzuki–Miyaura coupling of aryl bromides and chlorides in the room temperature ionic liquid trihexyltetradecylphosphonium bis(trifluoromethanesulfonyl)imide. Increased yields were achieved with ion-tagged ligands compared to ligands bearing pendant amines, likely due to higher solubility of the former. Cyclohexyl groups on the phosphine moiety generally resulted in higher yields than tert-butyl groups. In addition, a biphasic ionic liquid/water system outperformed catalysis in neat ionic liquid and provided higher yields at lower temperatures.

Supporting Information

 
  • References and Notes

  • 1 Yasuda N. J. Organomet. Chem. 2002; 653: 279
  • 2 Indolese AF, Schnyder A. Curr. Sci. 2000; 78: 1336
    • 3a Miyaura N, Suzuki A. Chem. Rev. 1995; 95: 2457
    • 3b Suzuki A. Chem. Commun. 2005; 4759
    • 4a Corbet J.-P, Mignani G. Chem. Rev. 2006; 106: 2651
    • 4b Dembitsky VM, Abu AH, Srebnik M. Stud. Inorg. Chem. 2005; 22: 119
  • 5 Wolfe JP, Singer RA, Yang BH, Buchwald SL. J. Am. Chem. Soc. 1999; 121: 9550
    • 6a Rataboul F, Zapf A, Jackstell R, Harkal S, Riermeier T, Monsees A, Dingerdissen U, Beller M. Chem. Eur. J. 2004; 10: 2983
    • 6b Zapf A, Jackstell R, Rataboul F, Riermeier T, Monsees A, Fuhrmann C, Shaikh N, Dingerdissen U, Beller M. Chem. Commun. 2004; 38
    • 7a Barnard TS, Mason MR. Organometallics 2001; 20: 206
    • 7b Barnard TS, Mason MR. Inorg. Chem. 2001; 40: 5001
  • 8 Mason MR, Beckford FA, Kirschbaum K, Gorecki BJ. Inorg. Chem. Commun. 2005; 8: 331
  • 9 So CM, Lau CP, Kwong FY. Org. Lett. 2007; 9: 2795
    • 10a Ni B, Headley AD. Chem. Eur. J. 2010; 16: 4426
    • 10b Li L, Wang J, Wu T, Wang R. Chem. Eur. J. 2012; 18: 7842
    • 11a Reetz M, de Vries JG. Chem. Commun. 2004; 1559
    • 11b Alimardanov A, Schmieder-van de Vondervoort L, de Vries AH. M, de Vries JG. Adv. Synth. Catal. 2004; 346: 1812
    • 11c Farina V. Adv. Synth. Catal. 2004; 346: 1553
    • 11d Huang W, Guo J, Xiao Y, Zhu M, Zou G, Tang J. Tetrahedron 2005; 61: 9783
    • 11e Jiang N, Ragauskas AJ. Tetrahedron Lett. 2006; 47: 197
    • 12a Yan N, Yang X, Fei Z, Li Y, Kou Y, Dyson PJ. Organometallics 2009; 28: 937
    • 12b Yang X, Fei Z, Zhao D, Ang WH, Li Y, Dyson PJ. Inorg. Chem. 2008; 47: 3292
    • 12c Fei Z, Geldbach TJ, Zhao D, Dyson PJ. Chem. Eur. J. 2006; 12: 2122
    • 12d Chiappe C, Pieraccini D, Zhao D, Fei Z, Dyson PJ. Adv. Synth. Catal. 2006; 348: 68
    • 12e Zhao D, Fei Z, Geldbach TJ, Scopelliti R, Dyson PJ. J. Am. Chem. Soc. 2004; 126: 15876
  • 13 Yu Y, Hu T, Chen X, Xu K, Zhang J, Huang J. Chem. Commun. 2011; 47: 3592
  • 14 McNulty J, Capretta A, Wilson J, Dyck J, Adjabeng G, Robertson A. Chem. Commun. 2002; 1986
  • 15 Welton T. Chem. Rev. 1999; 99: 2071
  • 16 Welton T. Green Chem. 2008; 10: 483
  • 17 Blanchard LA, Hancu D, Beckman EJ, Brennecke JF. Nature (London) 1999; 399: 28
  • 18 Blanchard LA, Brennecke JF. Ind. Eng. Chem. Res. 2001; 40: 287
  • 19 Blanchard LA, Gu Z, Brennecke JF. J. Phys. Chem. B 2001; 105: 2437
  • 20 Hintermair U, Gong Z, Serbanovic A, Muldoon MJ, Santini CC, Cole-Hamilton DJ. Dalton Trans. 2010; 39: 8501
  • 21 Sebesta R, Kmentova I, Toma S. Green Chem. 2008; 10: 484
  • 22 Lombardo M, Chiarucci M, Trombini C. Green Chem. 2009; 11: 574
  • 23 Papagni A, Trombini C, Lombardo M, Bergantin S, Chams A, Chiarucci M, Miozzo L, Parravicini M. Organometallics 2011; 30: 4325
  • 24 Tindale JJ, Ragogna PJ. Can. J. Chem. 2010; 88: 27
  • 25 Littke AF, Dai C, Fu GC. J. Am. Chem. Soc. 2000; 122: 4020
  • 26 Guram AS, King AO, Allen JG, Wang X, Schenkel LB, Chan J, Bunel EE, Faul MM, Larsen RD, Martinelli MJ, Reider PJ. Org. Lett. 2006; 8: 1787
  • 27 Guram AS, Wang X, Bunel EE, Faul MM, Larsen RD, Martinelli MJ. J. Org. Chem. 2007; 72: 5104
  • 28 Bedford RB, Butts CP, Hurst TE, Lidstrom P. Adv. Synth. Catal. 2004; 346: 1627
  • 29 McLachlan F, Mathews CJ, Smith PJ, Welton T. Organometallics 2003; 22: 5350
  • 30 Synthesis of 1-(Di-tert-butylphosphino)-3-di-methylaminomethylindole (1): A solution of n-butyl-lithium (1.6 M, 7.2 mL, 11.5 mmol) in hexanes was added via syringe to a cooled (–78 °C) solution of gramine (2.01 g, 11.5 mmol) in THF (50 mL). The resulting yellow solution was stirred for 1 h at r.t. before again cooling to –78 °C. A solution of t-Bu2PCl (2.083 g, 11.53 mmol) in THF (5 mL) was added via cannula. The reaction solution was stirred for 20 h at ambient temperature, after which the volatiles were removed in vacuo. The waxy yellow solid was dissolved in CH2Cl2 and the precipitated solids were removed by filtration over a pad of Celite on a sintered glass funnel. CH2Cl2 was removed in vacuo. Colorless crystals of 1-(di-tert-butylphosphino)-3-dimethylaminomethylindole (2.93 g, 83%) were grown from the slow evaporation of MeCN at r.t.; mp 80 °C. 1H NMR (600 MHz, CDCl3): δ = 7.84 (d, 3 J HH = 7.8 Hz, 1 H, H7), 7.65 (d, 3 J HH = 7.8 Hz, 1 H, H4), 7.35 (s, 1 H, H2), 7.21 (t, 3 J HH = 7.8 Hz, 1 H, H6), 7.14 (t, 3 J HH = 7.8 Hz, 1 H, H5), 3.64 (s, 2 H, CH2), 2.28 (s, 6 H, NMe2), 1.22 (d, 3 J HP = 13.2 Hz, 18 H, CMe3). 13C NMR (150.8 MHz, CDCl3): δ = 144.5 (s, C4a), 129.9 (d, 2 J CP = 8.9 Hz, C2), 129.0 (d, C7a), 122.1 (d, C6), 120.1 (s, C5), 119.0 (s, C4), 116.1 (s, C3), 113.2 (d, 3 J CP = 20.2 Hz, C7), 55.0 (s, CH2), 45.6 (s, NMe2), 35.3 (d, 1 J CP = 25.0 Hz, PC), 29.4 (d, 2 J CP = 16.4 Hz, PCMe 3). 31P NMR (161.9 MHz, CDCl3): δ = 71.3 (s). MS (ESI): m/z (%) = 341.1 (5) [MNa]+, 318.6 (18) [MH]+, 274.2 (100) [M – NMe2]+. Anal. Calcd for C19H31N2P: C, 71.66; H, 9.81; N, 8.80. Found: C, 71.70; H, 10.39; N, 8.83. Synthesis of 1-(Di-tert-butylphosphino)-3-trimethyl-ammoniummethylindole Iodide (1a): Iodomethane (0.391 g, 2.75 mmol) was added to a solution of compound 1 (0.844 g, 2.75 mmol) in toluene (60 mL) via syringe. The reaction mixture was stirred for 16 h at ambient temperature after which the white powder was isolated via filtration. 1-(Di-tert-butylphosphino)-3-trimethylammoniummethylindole iodide (1.15 g, 91%) was obtained by washing the solids with hexanes (10 mL) and drying in vacuo; mp 224 °C (dec.). 1H NMR (600 MHz, DMSO-d 6): δ = 8.03 (s, 1 H, H2), 7.83 (m, 2 H, H4, H7), 7.27 (t, 3 J HH = 7.8 Hz, 1 H, H5), 7.22 (t, 3 J HH = 7.8 Hz, 1 H, H6), 4.78 (s, 2 H, CH2), 3.08 (s, 9 H, NMe3), 1.18 (d, 3 J HP = 12.8 Hz, 18 H, CMe3). 13C NMR (150.8 MHz, DMSO-d 6): δ = 143.5 (d, 2 J CP = 20.51 Hz, C7a), 136.3 (s, C2), 128.2 (d, C4a), 122.7 (s, C5), 121.1 (s, C6), 118.9 (s, C7), 113.1 (s, C4), 106.3 (s, C3), 60.1 (s, CH2), 51.7 (s, NMe3), 34.7 (d, 1 J CP = 25.49 Hz, PC), 28.7 (d, 2 J CP = 15.99 Hz, PCMe 3). 31P NMR (161.9 MHz, DMSO-d 6): δ = 75.0 (s). MS (ESI): m/z (%) = 274.1 (100) [M – NMe3]+. Anal. Calcd for C20H34N2PI: C, 52.18; H, 7.44; N, 6.08. Found: C, 52.26; H, 7.77; N, 6.06. Synthesis of 1-(Dicyclohexylphosphino)-3-dimethylaminomethylindole (2): A solution of n-butyllithium (1.6 M, 3.7 mL, 5.9 mmol) in hexanes was added via syringe to a cooled (–78 °C) solution of gramine (1.01 g, 5.8 mmol) in THF (25 mL). The resulting yellow solution was stirred for 1 h at r.t. before cooling again to –78 °C. A solution of Cy2PCl (1.35 g, 5.8 mmol) in THF (5 mL) was added via cannula. The reaction solution was stirred for 20 h at ambient temperature, after which the volatiles were removed in vacuo. The waxy yellow solid was dissolved in CH2Cl2, the insoluble solids were removed by filtration over a pad of Celite on a sintered glass funnel, and CH2Cl2 was removed in vacuo. Colorless crystals of 1-(dicyclohexyl-phosphino)-3-dimethylaminomethyl indole (1.05 g, 49%) were grown from the slow evaporation of MeCN at r.t.; mp 71 °C. 1H NMR (600 MHz, CDCl3): δ = 7.73 (d, 3 J HH = 7.8 Hz, 1 H, H7), 7.62 (d, 3 J HH = 7.8 Hz, 1 H, H4), 7.20 (t, 3 J HH = 6.6 Hz, 1 H, H6), 7.14 (s, 1 H, H2), 7.12 (t, 3 J HH = 8.4 Hz, 1 H, H5), 3.63 (s, 2 H, CH2), 2.28 (s, 6 H, NMe2), 2.09 (br s, 2 H, Cy), 1.85 (d, J = 10.8 Hz, 2 H, Cy), 1.76 (d, J = 13.2 Hz, 2 H, Cy), 1.65 (m, 4 H, Cy), 1.47 (br s, 2 H, Cy), 1.31 (m, 2 H, Cy), 1.14 (m, 8 H, Cy). 13C NMR (150.8 MHz, CDCl3): δ = 143.4 (br s, C4a), 129.7 (br s, C2), 127.9 (br s, C7a), 122.1 (s, C6), 120.1 (br s, C5), 119.2 (s, C4), 116.3 (s, C3) 112.7 (d, 3 J CP =16.0 Hz, C7), 54.9 (s, CH2), 45.6 (s, NMe2), 36.5 (d, 2 J CP = 14.5 Hz, PCHCH2), 29.5 (d, 1 J CP = 20.5 Hz, PCH), 28.2 (d, 3 J CP = 6.7 Hz, PCHCH2 CH2), 26.9 (d, 2 J CP = 13.8 Hz, PCHCH2), 26.8 (d, 3 J CP = 7.6 Hz, PCHCH2 CH2), 26.4 (s, PCHCH2CH2 CH2). 31P NMR (161.9 MHz, CDCl3): δ = 48.7 (s). MS (ESI): m/z (%) = 393.6 (34) [MNa]+, 371.5 (5) [MH]+, 326.6 (100) [M – NMe2]+. Anal. Calcd for C23H35N2P: C, 74.56; H, 9.52; N, 7.56. Found: C, 74.90; H, 9.82; N, 7.38. Synthesis of 1-(Dicyclohexylphosphino)-3-trimethyl-ammonium-methylindole Iodide (2a): Iodomethane (0.193 g, 1.36 mmol) was added to a solution of compound 2 (0.503 g, 1.36 mmol) in toluene (30 mL) via syringe. The reaction mixture was stirred for 16 h at ambient temperature, after which the white powder was isolated by filtration. 1-(Dicyclohexylphosphino)-3-trimethylammonium-methyl-indole iodide (0.67 g, 96%) was obtained by washing the solid with Et2O (10 mL) and drying in vacuo; mp 202 °C (dec.). 1H NMR (600 MHz, DMSO-d 6): δ = 7.88 (s, 1 H, H2), 7.82 (d, 3 J HH = 7.8 Hz, 1 H, H7), 7.72 (d, 3 J HH = 7.8 Hz, 1 H, H4), 7.24 (t, 3 J HH = 7.2 Hz, 1 H, H5), 7.20 (t, 3 J HH = 7.2 Hz, 1 H, H6), 5.14 (s, 2 H, CH2), 3.42 (s, 9 H, NMe3), 2.29 (s, 2 H, Cy), 1.85 (br d, J = 8.3 Hz, 2 H, Cy), 1.72 (d, J = 11.4 Hz, 2 H, Cy), 1.61 (d, J = 8.3 Hz, 4 H, Cy), 1.36 (m, 4 H, Cy), 1.20 (m, 2 H, Cy), 1.05 (m, 6 H, Cy). 13C NMR (150.8 MHz, DMSO-d 6): δ = 142.3 (s, C7a), 134.8 (s, C2), 128.9 (s, C4a), 122.7 (s, C5), 121.1 (s, C6), 118.9 (s, C7), 112.6 (s, C4), 106.2 (s, C3), 60.1 (s, CH2), 51.6 (s, NMe3), 35.1 (d, 2 J CP = 15.0 Hz, PCHCH2), 28.7 (d, 1 J CP = 18.7 Hz, PCH), 27.6 (d, 3 J CP = 6.1 Hz, PCHCH2 CH2), 26.0 (d, 2 J CP = 13.7 Hz, PCHCH2), 25.8 (d, 3 J CP = 7.5 Hz, PCHCH2 CH2), 25.7 (s, PCHCH2CH2 CH2). 31P NMR (161.9 MHz, CDCl3): δ = 55.2 (s). MS (ESI): m/z (%) = 326.2 (100) [M – NMe3]+. Anal. Calcd for C24H38N2PI: C, 56.25; H, 7.47; N, 5.47. Found: C, 56.28; H, 7.57; N, 5.40. General Procedure for Suzuki–Miyaura Coupling Reactions (Thermal): Phenylboronic acid (50.6 mg, 0.415 mmol), Pd2(dba)3 (5.2 mg, 0.00566 mmol), ligand (0.0136 mmol), cesium carbonate (184.3 mg, 0.566 mmol), and aryl halide (0.377 mmol) were sequentially added to a 10-mL conical microwave vial in an inert atmosphere dry box. The mixture was suspended in [P66614][NTf2] (1.0 mL) and degassed H2O (0.6 mL) as appropriate (Tables 2 and 3) and stirred for 48 h at 180 °C in the sealed vial immersed in an oil bath. The reaction mixture was diluted with Et2O (1.0 mL) containing 1% decane and filtered through a pad of Celite. A 0.1-mL aliquot was diluted with Et2O (0.9 mL) and analyzed by GC–FID. Yields reported are the average of triplicate trials. General Procedure for Suzuki–Miyaura Coupling Reactions (Microwave): Phenylboronic acid (50.6 mg, 0.415 mmol), Pd2(dba)3 (5.2 mg, 0.00566 mmol), ligand (0.0136 mmol), cesium carbonate (184.3 mg, 0.566 mmol), and aryl halide (0.377 mmol) were sequentially added to a 10-mL conical microwave vial in an inert atmosphere dry box. The mixture was suspended in [P66614][NTf2] (1.0 mL) and degassed H2O (0.6 mL) as appropriate (Tables 2 and 3) and stirred for 3 h at 180 °C in the sealed vial in a Biotage Initiator microwave synthesizer. The reaction mixture was diluted with Et2O (1.0 mL) containing 1% decane and filtered through a pad of Celite. A 0.1-mL aliquot was diluted with Et2O (0.9 mL) and analyzed by GC–FID. Yields reported are the average of triplicate trials. Crystallographic data (excluding structure factors) for 1a have been deposited with the Cambridge Crystallographic Data Centre as supplementary publication CCDC 943804. Copies of the data can be obtained, free of charge, on application to CCDC, 12 Union Road, Cambridge CB2 1EZ, UK, [fax: +44(1223)336033 or e-mail: deposit@ccdc.cam.ac.Uk].