Open Access
CC BY-NC-ND 4.0 · Endosc Int Open 2022; 10(05): E664-E669
DOI: 10.1055/a-1793-9232
Original article

Snare devices with thinner loop wire may provide higher performance for cold snare polypectomy in an experimental model

Authors

  • Satoshi Ono

    1   Department of Gastroenterology, Chiba-nishi General Hospital, Chiba, Japan
    2   Department of Gastroenterology, The University of Tokyo Hospital, Tokyo, Japan
  • Kyohei Maejima

    1   Department of Gastroenterology, Chiba-nishi General Hospital, Chiba, Japan
  • Shun Ito

    1   Department of Gastroenterology, Chiba-nishi General Hospital, Chiba, Japan
  • Shosuke Hosaka

    1   Department of Gastroenterology, Chiba-nishi General Hospital, Chiba, Japan
  • Kiyotaka Umeki

    1   Department of Gastroenterology, Chiba-nishi General Hospital, Chiba, Japan
  • Shin-ichiro Sato

    1   Department of Gastroenterology, Chiba-nishi General Hospital, Chiba, Japan
  • Kota Akamine

  • Daichi Asai

    3   Department of Surgery, Chiba-nishi General Hospital, Chiba, Japan
  • Mitsuhiro Fujishiro

    2   Department of Gastroenterology, The University of Tokyo Hospital, Tokyo, Japan

Abstract

Background and study aims Snare devices play an important role in treatment of intestinal polyps. However, there are no objective measurements for the characteristics of the various types of snare devices.

Materials and methods Seven types of snare devices from four manufacturers were evaluated based on original measurements. The evaluated factors were stiffness, cutting quality, and change in force required for cutting depending on sheath shape. The latter two factors were evaluated by measuring the force required to cut 20 % gelatin cylinders, which simulated intestinal polyps. The cutting sharpness was evaluated by observing the sectional surface of cut gelatin cylinders using a stereomicroscope. The correlations between these measurements and characteristics of the snare devices were investigated.

Results A strong positive correlation, with an R2 value of 0.863, was shown between the force required to cut gelatin cylinders and loop wire diameter. Loop wire diameter also had a strong correlation, with an R2 value of 0.7997, with the change in force required for cutting gelatin cylinders depending on sheath shape. No correlations were detected between loop stiffness and characteristics of snare devices. The edge-enhanced image revealed that the rougher surfaces of the gelatin cylinders were cut by snares with a thicker diameter.

Conclusions Thinner loop wire may provide higher performance in cold snare polypectomy in an experimental model.



Publication History

Received: 06 October 2021

Accepted after revision: 11 January 2022

Article published online:
13 May 2022

© 2022. The Author(s). This is an open access article published by Thieme under the terms of the Creative Commons Attribution-NonDerivative-NonCommercial License, permitting copying and reproduction so long as the original work is given appropriate credit. Contents may not be used for commercial purposes, or adapted, remixed, transformed or built upon. (https://creativecommons.org/licenses/by-nc-nd/4.0/)

Georg Thieme Verlag KG
Rüdigerstraße 14, 70469 Stuttgart, Germany