Patientenindividuelle Rekonstruktion der Biomechanik in der Hüftendoprothetik

Zusammenfassung

Eine exakte Rekonstruktion der Biomechanik ist ein wesentlicher Bestandteil in der Hüftendoprothetik für eine gute postoperative Beweglichkeit und Stabilität des Kunstgelenks. Die präoperative Planung des Beinlängen- und Offsetausgleichs wird üblicherweise auf größenskalierten konventionellen Röntgenbildern durchgeführt, die jedoch durch die zweidimensionale Projektion der Gefahr von Fehlberechnungen unterliegen. Insbesondere das femorale Offset wird dabei häufig unterschätzt. Bei der Rekonstruktionsgenauigkeit von Beinlänge und Offset sollten Unterschiede von über 1 cm postoperativ vermieden werden. Analysen der Gangkinematik zeigen jedoch bereits Veränderungen im Gangmuster bei Beinlängen- und Offsetunterschieden von über 5 mm. Neben einer Vielzahl anderer Methoden eignen sich zur intraoperativen Umsetzung der Beinlängen- und Offsetrekonstruktion sowohl die bildfreie Navigation als auch die Fluoroskopie. Eine Abschätzung der Schafttorsion der einliegenden Endoprothese ist neben des Goldstandards CT auch auf konventionellen Röntgenaufnahmen mithilfe der Bestimmung des projizierten CCD-Winkels möglich. Als prädiktiver Parameter eignet sich die Isthmus-Ratio (iRatio), um bereits präoperativ nativradiologisch einen Hinweis der intraoperativ zu erwartenden Schafttorsion zu erhalten. Die Größe des Trochanter minor hilft, eine Abschätzung der nativen Torsion des Femurs treffen zu können.

Schlüsselwörter

biomechanische Rekonstruktion - Beinlänge - Offset - Planung - Hüftendoprothetik

• References/Literatur

• 1 Learmonth ID, Young C, Rorabeck C. The operation of the century: total hip replacement. Lancet 2007; 370: 1508-1519
• 2 Abdel MP, Cross MB, Yasen AT. et al. The functional and financial impact of isolated and recurrent dislocation after total hip arthroplasty. Bone Joint J 2015; 97-B: 1046-1049
• 3 Abdel MP, von Roth P, Jennings MT. et al. What Safe Zone? The Vast Majority of Dislocated THAs Are Within the Lewinnek Safe Zone for Acetabular Component Position. Clin Orthop Relat Res 2015; DOI: 10.1007/s11999-015-4432-5.
• 4 Herberts P, Malchau H. Long-term registration has improved the quality of hip replacement: a review of the Swedish THR Register comparing 160,000 cases. Acta Orthop Scand 2000; 71: 111-121
• 5 Abe H, Sakai T, Takao M. et al. Difference in Stem Alignment Between the Direct Anterior Approach and the Posterolateral Approach in Total Hip Arthroplasty. J Arthroplasty 2015; 30: 1761-1766
• 6 Phillips CB, Barrett JA, Losina E. et al. Incidence rates of dislocation, pulmonary embolism, and deep infection during the first six months after elective total hip replacement. J Bone Joint Surg Am 2003; 85-A: 20-26
• 7 Kennedy JG, Rogers WB, Soffe KE. et al. Effect of acetabular component orientation on recurrent dislocation, pelvic osteolysis, polyethylene wear, and component migration. J Arthroplasty 1998; 13: 530-534
• 8 Malik A, Maheshwari A, Dorr LD. Impingement with total hip replacement. J Bone Joint Surg Am 2007; 89: 1832-1842
• 9 Clark CR, Huddleston HD, Schoch 3rd EP. et al. Leg-length discrepancy after total hip arthroplasty. J Am Acad Orthop Surg 2006; 14: 38-45
• 10 Dastane M, Dorr LD, Tarwala R. et al. Hip offset in total hip arthroplasty: quantitative measurement with navigation. Clin Orthop Relat Res 2011; 469: 429-436
• 11 Konyves A, Bannister GC. The importance of leg length discrepancy after total hip arthroplasty. J Bone Joint Surg Br 2005; 87: 155-157
• 12 Varghese B, Muthukumar N, Balasubramaniam M. et al. Reliability of measurements with digital radiographs – a myth. Acta Orthop Belg 2011; 77: 622-625
• 13 Levine B, Fabi D, Deirmengian C. Digital templating in primary total hip and knee arthroplasty. Orthopedics 2010; 33: 797
• 14 Crowe JF, Mani VJ, Ranawat CS. Total hip replacement in congenital dislocation and dysplasia of the hip. J Bone Joint Surg Am 1979; 61: 15-23
• 15 Kjellberg M, Al-Amiry B, Englund E. et al. Measurement of leg length discrepancy after total hip arthroplasty. The reliability of a plain radiographic method compared to CT-scanogram. Skeletal Radiol 2012; 41: 187-191
• 16 Weber M, Woerner ML, Springorum HR. et al. Plain radiographs fail to reflect femoral offset in total hip arthroplasty. J Arthroplasty 2014; 29: 1661-1665
• 17 Pasquier G, Ducharne G, Ali ES. et al. Total hip arthroplasty offset measurement: is CT scan the most accurate option?. Orthop Traumatol Surg Res 2010; 96: 367-375
• 18 Lecerf G, Fessy MH, Philippot R. et al. Femoral offset: anatomical concept, definition, assessment, implications for preoperative templating and hip arthroplasty. Orthop Traumatol Surg Res 2009; 95: 210-219
• 19 Woolson ST, Hartford JM, Sawyer A. Results of a method of leg-length equalization for patients undergoing primary total hip replacement. J Arthroplasty 1999; 14: 159-164
• 20 Ranawat CS, Rao RR, Rodriguez JA. et al. Correction of limb-length inequality during total hip arthroplasty. J Arthroplasty 2001; 16: 715-720
• 21 Friberg O. Clinical symptoms and biomechanics of lumbar spine and hip joint in leg length inequality. Spine (Phila Pa 1976) 1983; 8: 643-651
• 22 Nishio S, Fukunishi S, Fukui T. et al. Adjustment of leg length using imageless navigation THA software without a femoral tracker. J Orthop Sci 2011; 16: 171-176
• 23 Little NJ, Busch CA, Gallagher JA. et al. Acetabular polyethylene wear and acetabular inclination and femoral offset. Clin Orthop Relat Res 2009; 467: 2895-2900
• 24 Mahmood SS, Mukka SS, Crnalic S. et al. Association between changes in global femoral offset after total hip arthroplasty and function, quality of life, and abductor muscle strength. Acta Orthop 2016; 87: 36-41
• 25 Sariali E, Klouche S, Mouttet A. et al. The effect of femoral offset modification on gait after total hip arthroplasty. Acta Orthop 2014; 85: 123-127
• 26 Benedetti MG, Catani F, Benedetti E. et al. To what extent does leg length discrepancy impair motor activity in patients after total hip arthroplasty?. Int Orthop 2010; 34: 1115-1121
• 27 Winter DA, Patla AE, Frank JS. et al. Biomechanical walking pattern changes in the fit and healthy elderly. Phys Ther 1990; 70: 340-347
• 28 Renkawitz T, Weber T, Dullien S. et al. Leg length and offset differences above 5 mm after total hip arthroplasty are associated with altered gait kinematics. Gait Posture 2016; 49: 196-201
• 29 Parratte S, Argenson JN. Validation and usefulness of a computer-assisted cup-positioning system in total hip arthroplasty. A prospective, randomized, controlled study. J Bone Joint Surg Am 2007; 89: 494-499
• 30 Renkawitz T, Worner M, Sendtner E. et al. [Principles and new concepts in computer-navigated total hip arthroplasty]. Orthopade 2011; 40: 1095-1102
• 31 Ezzet KA, McCauley JC. Use of intraoperative X-rays to optimize component position and leg length during total hip arthroplasty. J Arthroplasty 2014; 29: 580-585
• 32 Sendtner E, Tibor S, Winkler R. et al. Stem torsion in total hip replacement. Acta Orthop 2010; 81: 579-582
• 33 Bargar WL, Jamali AA, Nejad AH. Femoral anteversion in THA and its lack of correlation with native acetabular anteversion. Clin Orthop Relat Res 2010; 468: 527-532
• 34 Widmer KH, Zurfluh B. Compliant positioning of total hip components for optimal range of motion. J Orthop Res 2004; 22: 815-821
• 35 Weber M, Lechler P, von Kunow F. et al. The validity of a novel radiological method for measuring femoral stem version on anteroposterior radiographs of the hip after total hip arthroplasty. Bone Joint J 2015; 97-B: 306-311
• 36 Budin E, Chandler E. Measurement of femoral neck anteversion by a direct method. Radiology 1957; 69: 209-213
• 37 Lewinnek GE, Lewis JL, Tarr R. et al. Dislocations after total hip-replacement arthroplasties. J Bone Joint Surg Am 1978; 60: 217-220
• 38 Dorr LD, Malik A, Dastane M. et al. Combined anteversion technique for total hip arthroplasty. Clin Orthop Relat Res 2009; 467: 119-127
• 39 Hisatome T, Doi H. Theoretically optimum position of the prosthesis in total hip arthroplasty to fulfill the severe range of motion criteria due to neck impingement. J Orthop Sci 2011; 16: 229-237
• 40 Yoshimine F. The safe-zones for combined cup and neck anteversions that fulfill the essential range of motion and their optimum combination in total hip replacements. J Biomech 2006; 39: 1315-1323
• 41 Jolles BM, Zangger P, Leyvraz PF. Factors predisposing to dislocation after primary total hip arthroplasty: a multivariate analysis. J Arthroplasty 2002; 17: 282-288
• 42 Weber M, Woerner M, Craiovan B. et al. Current standard rules of combined anteversion prevent prosthetic impingement but ignore osseous contact in total hip arthroplasty. Int Orthop 2016; 40: 2495-2504