RSS-Feed abonnieren
PDF herunterladen
DOI: 10.1055/s-0040-1713058
The Effect of Nano Zinc Oxide Particles on Color Stability of MDX4-4210 Silicone Prostheses
Funding This research was supported by the Maxillofacial Prosthodontics and Dental Materials Research Unit, Faculty of Dentistry, Prince of Songkla University, Thailand.
Abstract
Objective This article aimed to study the effect of different concentrations of nano zinc oxide particles on the color change of MDX4–4210 facial silicone elastomer after artificial aging.
Materials and Methods Silicone specimens (N = 150) were fabricated by incorporating intrinsic pigments and divided into three groups—white, yellow, and red, each group consisting of 50 specimens (n = 50). In each color, specimens were subdivided into five subgroups according to the quantity of zinc oxide nanoparticles (0, 0.5, 1.0, 1.5, and 2.0% weight), where the 0% weight served as the control in each group. All specimens were then subjected to artificial aging using an accelerated aging machine chamber for 12, 24, 48, and 72 hours. L*a*b* values of specimens were noted after a different aging period by a spectrophotometer and ∆E* was calculated.
Statistical Analysis Two-way repeated analysis of variance (ANOVA) was done to examine the effects under test conditions (concentration and aging time) of each color group. Then color, concentration, and the aging period were subjected to three-way repeated ANOVA to investigate the effects of different colors and concentrations on ∆E*. Bonferroni’s test was performed to identify differences between groups. The significant level was at p = 0.05.
Results The control group showed significantly higher ∆E* values than the test groups. The 1.5% test group showed significantly lower ∆E* compared with the others. The 0.5 to 2.0% of nano zinc oxide significantly decreased the color change of the silicone elastomer (p < 0.05), but there were no significant differences among groups.
Conclusions Incorporation of 1.5% of nano zinc oxide can improve the color stability of silicone prosthesis (MDX4–4210).
Publikationsverlauf
Artikel online veröffentlicht:
08. September 2020
© .
Thieme Medical and Scientific Publishers Private Ltd.
A-12, Second Floor, Sector -2, NOIDA -201301, India
-
References
- 1 Beumer J, Marunick MT, Esposito S. Maxillofacial Rehabilitation: Prosthodontic and Surgical Management of Cancer-related, Acquired, and Congenital Defects of the Head and Neck. 3rd ed. Illinois: Quintessence Publishing; 2011
- 2 Jani RM, Schaaf NG. An evaluation of facial prostheses. J Prosthet Dent 1978; 39 (05) 546-550
- 3 Amornvit P, Rokaya D, Sanohkan S. Applications of PEEK in implant retained finger prosthesis. J Int Dent Med Res. 2019; 12 (04) 1606-1609
- 4 Amornvit P, Rokaya D, Keawcharoen K, Raucharernporn S, Thongpulsawasdi N. One- vs two stage surgery technique for implant placement in finger prosthesis. J Clin Diagn Res 2013; 7 (09) 1956-1968
- 5
Nobrega AS,
Malavazi EM,
Melo Neto CLM.
et al. Influence of different pigment incorporation methods on color, dimensional
stability, and detail reproduction of silicones. Eur J Dent 2019; 13 (03) 399-404
MissingFormLabel
- 6 Anitha KV, Behanam M, Ahila SC, Jei JB. A custom made intrinsic silicone shade guide for Indian population. J Clin Diagn Res 2016; 10 (04) ZC27-ZC30
- 7 Mehta S, Nandeeshwar DB. A spectrophotometric analysis of extraoral aging conditions on the color stability of maxillofacial silicone. J Indian Prosthodont Soc 2017; 17 (04) 355-360
- 8 Cantor R, Webber RL, Stroud L, Ryge G. Methods for evaluating prosthetic facial materials. J Prosthet Dent 1969; 21 (03) 324-332
- 9 Watson RM, Coward TJ, Forman GH. Results of treatment of 20 patients with implant-retained auricular prostheses. Int J Oral Maxillofac Implants 1995; 10 (04) 445-449
- 10 Beatty MW, Mahanna GK, Dick K, Jia W. Color changes in dry-pigmented maxillofacial elastomer resulting from ultraviolet light exposure. J Prosthet Dent 1995; 74 (05) 493-498
- 11 Gary JJ, Smith CT. Pigments and their application in maxillofacial elastomers: a literature review. J Prosthet Dent 1998; 80 (02) 204-208
- 12 Andreotti AM, Goiato MC, Moreno A, Nobrega AS, Pesqueira AA, dos Santos DM. Influence of nanoparticles on color stability, microhardness, and flexural strength of acrylic resins specific for ocular prosthesis. Int J Nanomedicine 2014; 9: 5779-5787
- 13 Goiato MC, Pesqueira AA, dos Santos DM, Antenucci RM, Ribeiro Pdo. Evaluation of dimensional change and detail reproduction in silicones for facial prostheses. Acta Odontol Latinoam 2008; 21 (01) 85-88
- 14 dos Santos DM, Goiato MC, Moreno A, Pesqueira AA, Haddad MF. Influence of pigments and opacifiers on color stability of an artificially aged facial silicone. J Prosthodont 2011; 20 (03) 205-208
- 15 Beltrami R, Ceci M, De Pani G. et al. Effect of different surface finishing/polishing procedures on color stability of esthetic restorative materials: a spectrophotometric evaluation. Eur J Dent 2018; 12 (01) 49-56
- 16 Ceci M, Viola M, Rattalino D, Beltrami R, Colombo M, Poggio C. Discoloration of different esthetic restorative materials: a spectrophotometric evaluation. Eur J Dent 2017; 11 (02) 149-156
- 17 Ergun G, Nagas IC. Color stability of silicone or acrylic denture liners: an in vitro investigation. Eur J Dent 2007; 1 (03) 144-151
- 18 Kantola R, Lassila LVJ, Tolvanen M, Valittu PK. Color stability of thermochromic pigment in maxillofacial silicone. J Adv Prosthodont 2013; 5 (02) 75-83
- 19 Eleni PN, Krokida M, Polyzois G, Gettleman L, Bisharat GI. Effects of outdoor weathering on facial prosthetic elastomers. Odontology 2011; 99 (01) 68-76
- 20
Nobrega AS,
Andreotti AM,
Moreno A,
Sinhoreti MA,
Dos Santos DM,
Goiato MC.
Influence of adding nanoparticles on the hardness, tear strength, and permanent deformation
of facial silicone subjected to accelerated aging. J Prosthet Dent 2016; 116 (04)
623-629.e1
MissingFormLabel
- 21 Lemon JC, Chambers MS, Jacobsen ML, Powers JM. Color stability of facial prostheses. J Prosthet Dent 1995; 74 (06) 613-618
- 22 Cifter ED, Ozdemir-Karatas M, Baca E. et al. Effect of vulcanization temperature and dental stone colour on colour degradation of maxillofacial silicone elastomers. BMC Oral Health 2017; 17 (01) 72
- 23 Kiat-amnuay S, Johnston DA, Powers JM, Jacob RF. Color stability of dry earth pigmented maxillofacial silicone A-2186 subjected to microwave energy exposure. J Prosthodont 2005; 14 (02) 91-96
- 24 Feldman D. Polymer weathering: photo-oxidation. J Polym Environ 2002; 10 (04) 163-173
- 25 Kheur MG, Kakade D, Trevor CJ, Lakha TA, Sethi T. Effect of newly developed pigments and ultraviolet absorbers on the color change of pigmented silicone elastomer. J Indian Prosthodont Soc 2017; 17 (04) 395-400
- 26 Haug SP, Andres CJ, Munoz CA, Bernal G. Effects of environmental factors on maxillofacial elastomers: part IV–optical properties. J Prosthet Dent 1992; 68 (05) 820-823
- 27 Vengatesan MR, Mittal V. Surface Modification of Nanomaterials for Application in Polymer Nanocomposites: An Overview. In: Mittal V. eds. Surface Modification of Nanoparticle and Natural Fiber Fillers. New Jersey: John Wiley & Sons;; 2015: 1-27
- 28 Cao Z, Zhang Z, Wang F, Wang G. Synthesis and UV shielding properties of zinc oxide ultrafine particles modified with silica and trimethyl siloxane. Colloids Surf A Physicochem Eng Asp 2009; 340 (01) 161-167
- 29 Kiat-Amnuay S, Mekayarajjananonth T, Powers JM, Chambers MS, Lemon JC. Interactions of pigments and opacifiers on color stability of MDX4-4210/type A maxillofacial elastomers subjected to artificial aging. J Prosthet Dent 2006; 95 (03) 249-257
- 30 Li R, Yabe S, Yamashita M. et al. UV-shielding properties of zinc oxide-doped ceria fine powders derived via soft solution chemical routes. Mater Chem Phys 2002; 75 (01) 39-44
- 31 Han Y, Zhao Y, Xie C, Powers JM, Kiat-amnuay S. Color stability of pigmented maxillofacial silicone elastomer: effects of nano-oxides as opacifiers. J Dent 2010; 38 (Suppl 2) e100-e105
- 32 Nada HE, Ahmad MA, Moustafa NA. Evaluation of intrinsic color stability of facial silicone elastomer reinforced with different nanoparticles. Alex Dent J. 2016; 41 (01) 50-54
- 33 Han Y, Kiat-amnuay S, Powers JM, Zhao Y. Effect of nano-oxide concentration on the mechanical properties of a maxillofacial silicone elastomer. J Prosthet Dent 2008; 100 (06) 465-473
- 34 Craig RG, Koran A, Yu R, Spencer J. Color stability of elastomers for maxillofacial appliances. J Dent Res 1978; 57 (9-10) 866-871
- 35
Goiato MC,
Nobrega AS,
Freitas da Silva EV.
et al. Tear strength analysis of MDX4-4210 and A-2186 silicones with different intrinsic
pigments incorporated by mechanical and industrial methods. Int J Dent 2019; 2019:
2573095
MissingFormLabel
- 36 Cifter ED, Ozdemir-Karatas M, Cinarli A, Sancakli E, Balik A, Evlioglu G. In vitro study of effects of aging and processing conditions on colour change in maxillofacial silicone elastomers. BMC Oral Health 2019; 19 (01) 122